Pro200 - Hi-Fi System Crystal Video - Free user manual and instructions
Find the device manual for free Pro200 Crystal Video in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System |
| Brand | Crystal Video |
| Model | Pro200 |
| Dimensions (W x H x D) | 400 x 300 x 200 mm |
| Weight | 5 kg |
| Power Supply | AC 220-240 V, 50 Hz |
| Power Consumption | 60 W |
| Audio Output Power | 2 x 50 W RMS |
| Frequency Range | FM: 87.5-108 MHz, AM: 520-1710 kHz |
| Playback Media | CD, CD-R, CD-RW, USB, Bluetooth |
| Bluetooth Version | 5.0 |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Speaker Configuration | 2-way bass reflex |
| Input Sensitivity | 500 mV |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Total Harmonic Distortion | < 0.5% |
| Remote Control | Included |
| Display Type | LCD with blue backlight |
| Tuner Presets | 30 FM, 20 AM |
| Clock/Timer | Alarm and sleep timer |
| Inputs | 3.5 mm AUX, USB Type-A |
| Outputs | Headphone jack (3.5mm) |
| Safety | Do not expose to moisture; use only specified power adapter |
| Cleaning | Wipe with a soft, dry cloth; avoid solvents |
| Repairability | Contact authorized Crystal Video service center for repairs |
Frequently Asked Questions - Pro200 Crystal Video
How do I connect my phone via Bluetooth?
Press the Bluetooth button on the remote or front panel to enter pairing mode. On your phone, search for 'Crystal Video Pro200' and select it to pair.
Why is there no sound from the speakers?
Check that the speakers are properly connected to the main unit. Ensure the volume is not at minimum and that the source (e.g., CD, Bluetooth) is selected correctly.
How can I set the clock?
Press and hold the Clock button on the remote until the hour digits flash. Use the +/- buttons to set the hour, then press Clock again to set minutes.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3/WMA/FLAC files into the USB port. Press USB source and playback will start automatically.
What should I do if the CD does not read?
Ensure the CD is clean and not scratched. Insert the CD label side up. If the issue persists, try a different CD. If still not working, the laser may need cleaning.
How do I preset radio stations?
Tune to the desired station, then press and hold one of the Preset buttons (1-5) on the remote. The station will be stored. Repeat for other stations.
The remote control isn't working. What should I do?
Replace the batteries in the remote with new ones. Ensure there is a clear line of sight to the main unit. If still not working, try resetting the remote by removing batteries for 30 seconds.
Can I connect external speakers?
No, the Pro200 is designed to work with the included speakers only. Using other speakers may damage the system.
How do I clean the system?
Unplug the unit. Wipe the exterior with a soft, dry cloth. Do not use any chemical cleaners or liquids.
What does the 'Sleep' function do?
The Sleep timer automatically turns off the system after a set time (15, 30, 45, or 60 minutes). Press Sleep repeatedly to select the desired time.
User questions about Pro200 Crystal Video
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Pro200 - Crystal Video and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro200 by Crystal Video.