Moog

Etherwave Theremin Plus - Uncategorized Moog - Free user manual and instructions

Find the device manual for free Etherwave Theremin Plus Moog in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Moog Etherwave Theremin Plus - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electronic musical instrument (theremin)
Brand Moog
Model Etherwave Theremin Plus
Dimensions (approx.) 18 x 14 x 6 inches (45.7 x 35.6 x 15.2 cm)
Weight 5 lbs (2.3 kg)
Power Supply 9V DC adapter (center positive, 2.1mm) or 9V battery
Power Consumption Approximately 100 mA
Main Functions Pitch and volume control via hand proximity; external CV outputs; headphone output; built-in speaker
Antenna Type Vertical pitch antenna (loop) and horizontal volume antenna (rod)
Audio Output 1/4" (6.35 mm) TS jack for line out; 1/8" (3.5 mm) headphone jack
CV Output Two 1/8" (3.5 mm) jacks for pitch and volume CV (0-5V)
Control Panel Volume knob, pitch knob, tuning indicator LED, power switch
Range Approximately 5 octaves (adjustable)
Material Plastic chassis with metal antennas
Care and Cleaning Wipe with a dry, soft cloth. Avoid liquids and abrasives.
Safety Warnings Do not disassemble; keep away from water; use only specified power adapter
Spare Parts Available from Moog authorized dealers (antennas, knobs, PCBs)
Repairability Service by qualified technician; user-replaceable battery
Warranty Typically 1 year limited warranty
Country of Origin USA (assembled in Asheville, NC)
Documentation User manual available as PDF

Frequently Asked Questions - Etherwave Theremin Plus Moog

How do I set up the Moog Etherwave Theremin Plus for the first time?
Connect the power adapter or insert a 9V battery. Turn on the power switch. Adjust the volume and pitch knobs to mid-range. Position your hands near the antennas: the right hand controls pitch (vertical antenna) and the left hand controls volume (horizontal antenna). Start by bringing your right hand closer to the pitch antenna to hear a tone.
How do I tune the theremin?
Use the pitch knob to adjust the starting pitch when your hand is at a comfortable distance (e.g., 12 inches). The tuning LED indicates the current note: ideally, it should light up when your hand is at a specific position. Turn the pitch knob until the desired pitch is achieved. Fine-tune by ear with the volume knob.
Can I connect the theremin to external effects or amplifiers?
Yes, use the 1/4' line output to connect to an amplifier, mixer, or effects pedal. The headphone output can also be used for monitoring. The CV outputs (pitch and volume) can control external synthesizers or modular systems.
Why is there no sound coming from my theremin?
Check power: ensure the power adapter is plugged in or the battery is fresh and properly inserted. Verify the power switch is on. Confirm the volume knob is turned up. Try headphones to test if the built-in speaker is faulty. If using line out, check cable and amplifier.
What type of battery does the theremin use?
It uses a standard 9V alkaline battery (6LR61 or 6F22). For extended use, a 9V rechargeable battery is also acceptable. Battery life is approximately 2-4 hours depending on usage.
How do I clean the theremin?
To clean, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water (not wet) and wipe. Avoid any cleaning solvents, as they may damage the plastic or electronic components. Keep antennas free of dust.
Can I use the theremin while charging?
If using a rechargeable battery, it is recommended to charge it externally. The theremin does not have a built-in charging circuit; it only runs on external DC power or battery. When connected to the AC adapter, the battery is not used.
What is the range of the theremin?
The pitch antenna typically covers about 4-5 octaves when your hand moves from about 2 feet away to close proximity. The effective range can be adjusted using the pitch knob. The volume antenna controls loudness from silence to full volume as your hand approaches.
Are spare parts available for the Etherwave Theremin Plus?
Yes, Moog offers replacement antennas, knobs, and circuit boards through authorized service centers. Contact Moog support or visit their website for parts and repair options. The user can replace the battery easily.
How does the theremin produce sound?
The theremin generates two high-frequency oscillators that mix to produce an audio frequency. The pitch antenna changes the frequency of one oscillator based on hand capacitance, altering pitch. The volume antenna similarly controls the amplitude. The resulting signal is amplified and output through the speaker or line out.

User questions about Etherwave Theremin Plus Moog

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Etherwave Theremin Plus - Moog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Etherwave Theremin Plus by Moog.

USER MANUAL Etherwave Theremin Plus Moog

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Moog

Model : Etherwave Theremin Plus

Category : Uncategorized