ProLiant DL580 G10 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL580 G10 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mountable server (4U) |
| Dimensions (H x W x D) | 6.9 x 48.3 x 79.9 cm (2.7 x 19.0 x 31.5 in) |
| Weight | Maximum 68.0 kg (150 lb) |
| Number of Processors Supported | Up to 4 Intel Xeon Scalable processors |
| Memory Slots | 48 DIMM slots (DDR4 RDIMM/LRDIMM) |
| Maximum Memory Capacity | Up to 6 TB (with 128 GB LRDIMMs) |
| Power Supply Units (PSUs) | Up to 4 hot-plug redundant power supplies (800 W/1600 W) |
| Storage Controller | HPE Smart Array P408i-a SR Gen10 or similar |
| Drive Bays | Up to 48 SFF or 24 LFF hot-plug SAS/SATA/SSD drives |
| Network Interface | Embedded 1 GbE and 10 GbE adapters; optional |
| Management | HPE iLO 5 (Integrated Lights-Out) for remote management |
| Security Features | TPM 2.0, Secure Boot, chassis intrusion detection, iLO security |
| Operating Temperature Range | 10°C to 35°C (50°F to 95°F) at sea level |
| Operating Humidity Range | 20% to 80% RH (non-condensing) |
| Maintenance & Cleaning | Use compressed air for dust removal; avoid liquid cleaners |
| Repairability / Spare Parts | Modular design with hot-plug components; HPE spare parts support |
| General Information | Enterprise-class server for mission-critical workloads |
Frequently Asked Questions - ProLiant DL580 G10 HP
How do I access the BIOS/UEFI setup on the ProLiant DL580 G10?
Press F9 during system startup to enter the System Utilities (BIOS/UEFI).
What is the recommended procedure for installing memory modules?
Refer to the server's memory population guidelines. Use only HP-certified DDR4 modules and install in the recommended order based on processor configuration.
How can I reset the iLO password on the ProLiant DL580 G10?
Press the iLO reset button on the system board (labeled with a key icon) for 5 seconds to reset iLO to factory defaults, including the password.
What are the supported operating systems?
The server supports Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi, and other major enterprise OSes. Check HPE compatibility matrix.
How do I replace a failed hot-plug power supply?
Ensure the replacement PSU has the same wattage. Remove the failed PSU by pulling the handle, then slide in the new one until it clicks. The system will recognize it automatically.
What should I do if the server overheats?
Check the ambient temperature (max 35°C), ensure front bezel is removed for airflow, and inspect fans for proper operation. Clean dust from filters using compressed air.
How can I enable Secure Boot?
Enter System Utilities (F9), navigate to Security > Secure Boot Configuration, and set it to Enabled. Ensure OS supports Secure Boot.
What is the maximum number of drives supported with expansion?
With optional Smart Array controllers and expansion cages, the DL580 G10 can support up to 48 SFF or 24 LFF drives.
How do I update the firmware on the server?
Use HPE Service Pack for ProLiant (SPP) or the iLO web interface. Download the latest SPP ISO and boot from it, or use iLO's firmware update utility.
Can I use third-party components like RAM or SSDs?
HP strongly recommends using HP-certified components to ensure compatibility and warranty support. Third-party parts may cause instability.
User questions about ProLiant DL580 G10 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL580 G10 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL580 G10 by HP.
USER MANUAL ProLiant DL580 G10 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL580 G10
Category : Server