ProLiant DL320 Gen11 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL320 Gen11 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Form Factor | 1U |
| Dimensions (W x D x H) | 445 x 699 x 43 mm |
| Weight (Maximum) | 18.6 kg |
| Processor | Intel Xeon Scalable Gen4/Gen5 |
| Memory | DDR5, up to 2 TB |
| Power Supply | Dual redundant, 800W or 1000W |
| Storage Controllers | HPE Smart Array / NVMe support |
| Drive Bays | Up to 10 SFF or 4 LFF |
| Network | Embedded 1GbE / Optional 10/25GbE |
| Expansion Slots | 2 x PCIe Gen5 |
| Management | HPE iLO 6 |
| Cooling | Hot-plug redundant fans |
| Operating Temperature | 5°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Power Efficiency | 80 PLUS Platinum |
| Security Features | TPM 2.0, Secure Boot, iLO Security |
| Maintenance | Tool-less access, hot-swap drives |
| Spare Parts | PSU, fans, drives, memory kits |
| Repairability | Field-replaceable units (FRUs) |
| Certifications | ENERGY STAR, UL, CE |
Frequently Asked Questions - ProLiant DL320 Gen11 HP
How do I access the HP ProLiant DL320 Gen11 iLO interface?
Press the iLO button on the front panel during POST or configure the network IP via the System Utilities screen. Default credentials are on the chassis tag.
What type of memory does the DL320 Gen11 support?
It supports DDR5 ECC RDIMMs (4800 MT/s) and 3DS RDIMMs. Mixing different types is not recommended.
How do I install a hot-swap hard drive?
Open the drive bay lever, insert the drive sled until fully seated, then close the lever. The drive will be automatically detected. For NVMe, ensure the slot supports PCIe.
Can I use third-party SSDs?
HP recommends using HPE qualified drives for optimal performance and support. Non-qualified drives may cause warning messages or reduced functionality.
How to reset the iLO password?
Reboot the server and during POST press F9 for System Utilities, then go to iLO Configuration and select Reset to Factory Defaults. Alternatively, use the iLO REST API.
What is the maximum supported RAM?
The maximum is 2 TB using 256 GB 3DS RDIMMs across 16 slots (2 DIMMs per channel).
How do I update the firmware?
Use HPE SUM (Smart Update Manager) or iLO to apply firmware bundles. Ensure all components are updated in the correct sequence (system ROM first).
What are the noise levels?
Typical noise at 23°C ambient: 45 dBA (idle) and 55 dBA (full load). Levels vary with fan speed and configuration.
Can I install a GPU?
Yes, up to one single-width GPU (e.g., NVIDIA A16) in PCIe slot 1, provided adequate power supply (≥1000W) and optional GPU riser are used.
How to configure RAID?
Enter Smart Storage Administrator (SSA) during POST (Ctrl+A) or use the HPE iLO web interface. Create logical drives with desired RAID level (0,1,5,6,10).
User questions about ProLiant DL320 Gen11 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL320 Gen11 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL320 Gen11 by HP.
USER MANUAL ProLiant DL320 Gen11 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL320 Gen11
Category : Server