GRD 300/R - Motorized wheelbarrow GUDE - Free user manual and instructions
Find the device manual for free GRD 300/R GUDE in PDF.
| Product Type | Motorized Wheelbarrow |
| Brand | Güde |
| Model | GRD 300/R |
| Load Capacity | 300 kg |
| Engine | 4-stroke, 196 cm³ |
| Power | 4.8 kW (6.5 HP) |
| Fuel Type | Unleaded petrol |
| Tank Capacity | 1.5 L |
| Transmission | CVT variator |
| Max Speed | 3 km/h |
| Starting | Manual (recoil starter) |
| Steering | Adjustable handlebar |
| Dump Tipping | Manual by lever |
| Tires | 4.00-8 (pneumatic) |
| Dimensions (L x W x H) | 150 x 70 x 90 cm |
| Net Weight | 80 kg |
| Noise Level | 96 dB(A) (at operator's position) |
| Maintenance | Engine oil change, air filter cleaning, spark plug check |
| Safety | Parking brake, engine protection cover, emergency stop |
| Spare Parts | Available on the Güde website and from authorized dealers |
| Warranty | 2 years |
Frequently Asked Questions - GRD 300/R GUDE
User questions about GRD 300/R GUDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Motorized wheelbarrow in PDF format for free! Find your manual GRD 300/R - GUDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GRD 300/R by GUDE.
USER MANUAL GRD 300/R GUDE
Translation of the original instructions Motor wheelbarrow
GRD 300/R
55461
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
ENGLISH Please read the instructions carefully before starting the machine.
English TECHNICAL DATA | SAFETY INSTRUCTIONS | SPECIFIED CONDITIONS OF USE | EMERGENCY PROCEDURE | CHARGING EQUIPMENT | BATTERY | WORK INSTRUCTIONS | SYMBOLS | DISPOSAL | GUARANTEE | SERVICE ____27
Français CARACTÉRISTIQUES TECHNIQUES | I NSTRUCTIONS DE SÉCURITÉ | UTILISATION CONFORME À LA DESTINATION | CONDUITE EN CAS D'URGENCE | DISPOSITIF DE CHARGE | BATTERIA | CONSIGNES DE TRAVAIL | SYMBOLES | LIQUIDATION | GARANTIE | SERVICE ____ 33
DE Montage
EN Assembly
FR Assemblage
IT Montaggio
NL Montage
CZ Assembly
SK Assembly
HU Assembly
1
DE Commissioning
EN Starting-up the machine
FR Commissioning
EN Cleaning / Maintenance
FR Cleaning / Maintenance
DE Assembly EN Assembly FR Assembly IT Assembly NL Assembly CZ Assembly SK Assembly HU Assembly
3
4
3+4
DE Assembly
EN Assembly
FR Assembly
IT Assembly
NL Assembly
CZ Assembly
SK Assembly
HU Assembly
5
6
DE Assembly EN Assembly FR Assembly IT Assembly NL Assembly CZ Assembly SK Assembly HU Assembly
7
1
| 1 | DE | Montage |
| EN | Assembly | |
| FR | Montage | |
| IT | Montaggio | |
| NL | Montage | |
| CZ | Montáž | |
| SK | Montáž | |
| HU | Szerelés |
DE Check oil level EN Oil level inspection FR Check oil level IT Check oil level NL Check oil level CZ Check oil level SK Check oil level HU Check oil level
10W-40
2
| 2 | DE Ölstand kontrollieren |
| EN Oil level inspection | |
| FR Contrôle du niveau d'huile | |
| IT Controllo livello d'olio | |
| NL Oliepeil controleren | |
| CZ Kontrola stavu oleje | |
| SK Kontrola stavu oleja | |
| HU Olajszint ellenőrzése |
DE Check oil level EN Oil level inspection FR Check oil level IT Check oil level NL Check oil level CZ Check oil level SK Check oil level HU Check oil level
For quality assurance reasons, every device is subjected to a test run and filled with motor oil. Before transport, the oil is drained again; however, there may be residual motor oil on the dipstick. Please still check the oil level carefully and top up with motor oil.
Working instructions
DE Operation - START EN Operation - START FR Operation - START IT Operation - START NL Use - START CZ Operation - START SK Operation - START HU Operation - START
Operation - START
Operation - START
10 sec
3 2 1 Ⓜ R
3 2 1 Ⓜ R
3 2 1 Ⓜ R
3 2 1 Ⓜ R
DE Operation - START EN Operation - START FR Operation - START IT Operation - START NL Use - START CZ Operation - START SK Operation - START HU Operation - START
Operation - STOP
Operation - STOP
Spark plug
Air filter
2
Paper filter to be cleaned with compressed air only! Never use water!
3
Technical data
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the
control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
In case of any doubts about connection and operation, please refer to our customer center.
Only persons over 18 years of age can work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education. Never let children work with the appliance. Never let adults
work with the appliance unless they have been properly trained.
This appliance has not been designed to be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of knowledge or experience.
Children must be supervised in order not to play with the machine.
Specified Conditions Of Use
The motor wheelbarrow should only be used for small loading and transport tasks for gardening, landscaping and for agricultural purposes. Respecting technical data and safety precautions.
The machine is intended only for use on construction sites where on-site conditions are conducive to the use of machinery.
Always place the unit on a firm and flat surface! Please ensure that the machine does not tip over, slide or fall during use.
Please maintain enough distance from the secured edges of the construction pit as well as any embankments.
The machine must never be used on a slope. Do not work with the unit in an environment with a risk of explosion where there are flammable liquids, gases or dust.
The machine must never be used in deep pits, tunnels or caves (> 1.5 m).
The work site must be free of electric cables as well as gas and water lines that could sustain damage from the vibrations.
Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
The machine may only be used in a technically perfect condition and taking into account all safety information.
The use of the machine is at the discretion of the operator; use at your own risk.
Residual risks
Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.
Electric shock
Touching the spark plug connector may result in an electric shock when the engine is running.
Never touch the plug connector or the spark plug while the engine is running.
⚠ Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors!
Risk of crushing
Careless handling of the machine can result in serious injury. Wear safety shoes with steel reinforcement!
Risk of fire!
Never operate the unit near highly flammable materials.
Fuel is highly flammable.
Keep the fuel in suitable containers only.
The appliance may only be refuelled outdoors and not near open fire or burning cigarettes.
Refuel the engine only when switched off. Refuel before starting the appliance. If the engine is running or still hot, it must not be refuelled or the tank cover opened.
After use, let the unit cool down for at least 10 minutes before refuelling.
Make sure the fuel does not overflow. If the fuel overflows, the engine must not be started. Remove any dirt from the appliance and prevent any attempt at ignition until fuel fumes have evaporated.
Replace all fuel tank and container caps securely.
Fuel tank to be emptied outdoors only.
Risk of poisoning!
Exhaust gases, fuel and lubricants are toxic. Inhaling exhaust gases may be fatal!
Do not operate the unit in closed spaces where dangerous carbon monoxide gases may accumulate.
Never use the appliance inside rooms; to be used outdoors only.
Risk of explosion!!
Petrol and petrol vapours are highly flammable, explosive.
Do not work with the unit in an environment with a risk of explosion where there are flammable liquids, gases or dust.
Refuel the engine only when switched off.
Do not store any fuel near the unit.
Never keep the unit with petrol in the tank inside a building where petrol vapours could get in contact with open fire or sparks.
⚠ Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection against white finger disease or carpal tunnel syndrome. Therefore, it is necessary to carefully check the state of your fingers and wrist if you have regularly used the appliance for a long time. If any symptom of the diseases above appears, seek medical advice immediately. To reduce the white finger disease risk, keep your hands warm and take regular breaks during your work.
Danger of burns!
Some parts of the appliance get too hot when the appliance is operated. Do not touch any hot parts, e.g. engine and muffler. Contacting hot parts of the unit may cause burns. Pay attention to the warnings on the advice.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury type(s)
Safety instructions
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Read carefully the operating and maintenance instructions. Familiarise thoroughly with the controls and proper use of the appliance. You need to know how the appliance works and how controls can immediately be switched off.
Keep children and other persons including animals in a safe distance when using the appliance.
Minimum safe distance is 5 m.
Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment.
Do not allow anybody to stand on the appliance.
Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear, helmet and ear defenders.
Protective glasses or a shield should always be used when operating, adjusting or repairing the appliance.
Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away. Being careful prevents slipping or falling, especially when reversing.
Poor lighting/light conditions represent a high safety risk. Provide adequate lighting or good lighting conditions when working with the machine.
Do not operate the machine in a confined space where the machine's operator is at risk of being trapped between the machine and other objects.
Do not overreach. Keep proper footing and balance at all times.
Before work can begin, operators must familiarise themselves with the work site. Elements of the work site include, for example, obstacles around the site or in the surrounding traffic, the load bearing capacity of the earth and ensuring the construction site is safe and secured.
Safe operation requires sufficient operator knowledge of the functions and positions of the controls and indicators or meters. Pay attention to the illustrated pages in the front section of the manual.
The appliance should only be used when in a perfect state. Carry out a visual inspection before switching the appliance on. Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. Replace any damaged parts before the appliance is put into operation if necessary.
The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on unit and fit other protective equipment instead.
No change can be made in respect of engine and unit setting.
Do not adjust the appliance when the engine is running (except for settings directly recommended by the manufacturer).
When working with this machine, do not use spare parts other than those recommended by us. Using spare parts not recommend by us can result in serious injuries to persons or damage to the machine.
Avoid any inadvertent starting of the engine. Make sure that the control lever is always in the 'Start' position when you pull the starter rope.
Switch the appliance off immediately after finishing your work.
Always operate the device with both hands during operation. Hold the steering bar with a firm grip.
Note that the machine can jump upwards or forwards unexpectedly if it encounters buried obstacles such as large stones.
Do not overload the machine.
Run it at a safe speed and adjust it to the average ground slope, road conditions, and the load to be transported.
Do not race when working with the appliance. Walk slowly and cautiously.
Pay maximum attention when turning around and pulling the appliance toward you.
Always be very careful when crossing over or driving on dirt roads, gravel roads, or country roads. Look out for hidden hazards or traffic.
Pay the greatest possible attention when working on frozen ground, as the machine may begin to slide in the process.
Always make sure that the weight is evenly distributed when driving on a slope, regardless of whether you are driving forwards or backwards. Always travel
in a direction parallel to the slope (upwards or downwards). To avoid hazards, do not shift gears whilst on a slope.
When the load is tilted from the dumper body, the center of gravity of the load changes constantly, and the ground conditions become a crucial factor for the stability of the machine. There are particular risks for track dumpers, which operate on soft ground and have a load, e.g., clay, stuck to the vehicle's body.
If the appliance starts abnormally vibrating, switch the engine off and search for the cause immediately. Generally, vibrations are a warning against operating failure.
Switch the engine off and unplug it if you are not working with the appliance or when leaving the appliance or adjusting, maintaining, or repairing it.
When cleaning, repairing and checking the appliance, make sure that the working screw/rotor and all moving parts are stopped.
Oil products must not come into contact with skin, eyes and clothing.
Operational safety instructions for snow plough blades
Snow should be removed only after adjusting the snow blower to the outdoor temperature when there are extreme temperature differences. Immediate snow removing could lead to premature wear of the drive shaft and other extensions such as the rubber flap.
Be extremely careful when running over or removing snow off brash entrances, footpaths and paths. Be prepared for unexpected risks or moving vehicles.
When you hit a foreign item, switch the engine off, disconnect the cable from the spark plug and check thoroughly the snow blower for any damage and remove it if necessary – the snow blower can be put into operation again and worked with now.
Do not remove snow across slopes. Be extremely careful when changing movement direction on slopes. Never try to remove snow on steep slopes.
Do not overload the appliance; do not try to remove snow too quickly.
Never use the appliance at a high travelling speed on a slippery surface. Be careful when reversing.
The snow blower must only be used when appropriate visibility or good lighting is provided. Stand fast on the ground and hold the handle tight by hands at all times. Walk, never run.
Transport and storage
Secure the device against shifting and toppling during transport.
Take care to prevent from fuel and oil leakage during transport.
Do not store the appliance in enclosed places just after being switched off but let it cool down outdoors instead.
Machine to be stored in a dry place. When the appliance is not going to be used for a long time, store it with an empty tank.
Set up the machine in such a way that it cannot move during maintenance, cleaning, adjustment, installation of accessories or spare parts, or storage.
Secure the machine to prevent it from rolling away.
Symbols
Caution!
Warning against hot surfaces! Danger of burns!
Warning against dangerous electric voltage.
Warning about inflammable substances.
Keep out of the danger zone. Minimum safe distance is 5 m.
Read the operating instructions to reduce the risk of injury.
Wear ear protectors! Wear eye protective goggles! Wear protective helmet!
Wear gloves!
Wear safety shoes with steel reinforcement!
Slow
Quickly
Switch off the engine before any work on it.
Prohibited smoking and open fire using.
Warning against risk of tripping
Warning against thrown-off items
Risk of poisoning! Use the appliance only outside, never use it in confined and bad ventilated areas.
Risk of crushing
Being careful prevents slipping or falling, especially when reversing.
Please ensure that the machine does not tip over, slide or fall during use.
Never remove or switch off the protective equipment and never put it out of operation.
Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
Dispose of old oil in an environmentally friendly manner. Make sure the oil products do not enter the soil.
CE marking
Guaranteed sound power level LWA
Unleaded petrol
Maintenance
Switch the engine off and remove the socket plug before any work on the engine. Wait until the unit has cooled down.
The engine must necessarily be filled with engine oil before being put into operation for the first time. Check the oil level whenever the appliance is to be put into operation. Add engine oil if necessary. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.
Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts. Carry out a visual inspection before switching the appliance on.
Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guede.com.
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Inspection and maintenance plan
Repairs and works specified in these Instructions may only be performed by qualified authorized staff. Use only original accessories and original spare parts.
| Regular servicing period Before any start-up | After 1 month or 20 hours of operation | After 3 months or 50 hours of operation | After 6 months or 100 hours of operation | After 200 hours of operation |
ENGLISH
| Engine oil | Inspection | √ | ||||
| Change | √ | √ | ||||
| Petrol hose Exhaust system Choke Cable starter | Inspection | √ | ||||
| Air filter | Clean | √ | ||||
| Change | √ | √ | ||||
| Petrol filter Clean | √ | |||||
| Spark plug | Inspection Clean | √ |
Tip: To ensure reliable operation of the appliance, we strongly recommend using fuel additives and performing 2-3 test operations after a longer time of not using the unit.
Failure removal
| Failures | Causes | Removal |
| The motor does not start. | Closed fuel tap Make sure the fuel tap and On/Off are in the „ON” position | |
| Lack of fuel Add some fuel | ||
| Weak tension on the starter Pull strongly the starting cord. | ||
| Wrong fuel, storing without petrol tank being drained | Drain the fuel tank and carburettor, add fresh petrol | |
| Sooted spark plug (carbon residues on electrodes), electrodes distance too big | Clean the spark plug, check the plug thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm | |
| The spark plug is wet from petrol (oversaturated engine). | Dry the spark plug out and refit it. | |
| Little oil in the engine Add oil | ||
| Unit is not in a horizontal position. Lack of oil being signalled | Place the unit in a horizontal position | |
| Choke has not been used Use the choke | ||
| Engine running irregularly | Problem with ignition Make sure the spark plug is fitted pro-perly. Make sure the spark plug cable is on the spark plug. Clean the spark plug and check the electrodes if correct. | |
| Wrong fuel (propellant) Make sure proper fuel has been used. | ||
Warning: flammable substances
Translation of the EC-Declaration of Conformity
We hereby declare that the conception and construction of the below-mentioned appliances correspond, at the type of construction being launched, to the appropriate basic safety and hygienic requirements of the EC Directives.
In case of any change to the appliance not discussed with us, the Declaration expires.
- GRD 300/R
- ENGLISH TECHNICAL DATA | SAFETY INSTRUCTIONS | SPECIFIED CONDITIONS OF USE | EMERGENCY PROCEDURE | CHARGING EQUIPMENT | BATTERY | WORK INSTRUCTIONS | SYMBOLS | DISPOSAL | GUARANTEE | SERVICE
- FRANÇAIS CARACTÉRISTIQUES TECHNIQUES | I NSTRUCTIONS DE SÉCURITÉ | UTILISATION CONFORME À LA DESTINATION | CONDUITE EN CAS D'URGENCE | DISPOSITIF DE CHARGE | BATTERIA | CONSIGNES DE TRAVAIL | SYMBOLES | LIQUIDATION | GARANTIE | SERVICE
- DE MONTAGE
- DE COMMISSIONING
- SPECIFIED CONDITIONS OF USE
- RESIDUAL RISKS
- ELECTRIC SHOCK
- ⚠ HEARING DAMAGE
- RISK OF CRUSHING
- RISK OF FIRE
- RISK OF POISONING
- RISK OF EXPLOSION
- ⚠ DAMAGE TO HEALTH ARISING FROM VIBRATIONS TO HAND AND ARMS IF THE DEVICE IS USED FOR A LONG TIME OR IF THE DEVICE IS NOT GUIDED AND EVALUATED PROPERLY
- DANGER OF BURNS
- EMERGENCY PROCEDURE
- SAFETY INSTRUCTIONS
- WARNING
- OPERATIONAL SAFETY INSTRUCTIONS FOR SNOW PLOUGH BLADES
- TRANSPORT AND STORAGE
- SYMBOLS
- MAINTENANCE
- GUARANTEE
- IMPORTANT INFORMATION FOR THE CUSTOMER
- SERVICE
- INSPECTION AND MAINTENANCE PLAN
- TRANSLATION OF THE EC-DECLARATION OF CONFORMITY
Brand : GUDE
Model : GRD 300/R
Category : Motorized wheelbarrow