Cambium Networks

EPMP Force 180 - Access Point Cambium Networks - Free user manual and instructions

Find the device manual for free EPMP Force 180 Cambium Networks in PDF.

📄 482 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Cambium Networks EPMP Force 180 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Point-to-Multipoint Access Point
Brand Cambium Networks
Model EPMP Force 180
Radio Technology OFDM (Orthogonal Frequency Division Multiplexing)
Frequency Band 5 GHz (5.15 – 5.875 GHz)
Max Throughput Up to 450 Mbps (aggregate)
Dimensions (H x W x D) 330 mm x 330 mm x 80 mm
Weight 2.5 kg
Power Supply 48V PoE (Power over Ethernet) injector included
Power Consumption 30W (typical)
Operating Temperature -40°C to +60°C
Humidity 0% to 100% (condensing)
Ethernet Interface 1x 10/100/1000 Base-T (RJ-45) with PoE in
Antenna Integrated directional panel antenna, 18 dBi gain
Polarization Dual linear (Vertical/Horizontal)
Security WPA2-PSK, WPA3-PSK, 128-bit AES encryption
Management Web GUI, CLI (SSH), SNMP v3, cnMaestro cloud
Mounting Pole mount (included kit), wall mount optional
Ingress Protection IP66
Surge Protection Integrated lightning protection (10 kV)
Maintenance & Cleaning Wipe with a damp cloth; no solvents. Inspect cables and connectors annually.
Spare Parts & Repairability Contact Cambium Networks support for replacement parts. Device is not user-serviceable.
General Information Designed for wireless ISP networks and enterprise backhaul.

Frequently Asked Questions - EPMP Force 180 Cambium Networks

What is the maximum range of the EPMP Force 180?
The maximum range depends on the environment and antenna configuration. Typically, it can reach up to 20 km with clear line-of-sight and appropriate subscriber modules.
How do I configure the EPMP Force 180 for the first time?
Connect via PoE to your network, assign an IP address, and access the web GUI through a browser. Use the default credentials (admin/admin) to log in and run the setup wizard.
Can I use the EPMP Force 180 indoors?
It is designed for outdoor use. Indoor use may lead to overheating and reduced performance due to the high-gain antenna.
What type of PoE injector is required?
A 48V PoE injector (Power over Ethernet) conforming to 802.3at standards is required. The unit includes a compatible injector.
How do I update the firmware?
Download the latest firmware from the Cambium Networks support site. In the web GUI, go to Maintenance > Firmware Upgrade, upload the file, and apply. Do not power off during upgrade.
Is the EPMP Force 180 compatible with other brands?
It is optimized for use with Cambium Networks ePMP subscriber modules for best performance. Third-party devices may work but are not guaranteed.
What does the LED indicator mean?
Solid green: powered on and connected. Blinking green: booting or firmware upgrade. No light: no power or faulty connection.
How do I reset the device to factory settings?
Press and hold the reset button (located near the Ethernet port) for 10 seconds using a pin. The device will reboot with default settings.
What security features are supported?
The EPMP Force 180 supports WPA2-PSK, WPA3-PSK, and 128-bit AES encryption. For enterprise networks, additional authentication via RADIUS is available.
Can I use the EPMP Force 180 in extreme weather?
Yes, it has an IP66 rating and operates from -40°C to +60°C, making it suitable for harsh outdoor environments.

User questions about EPMP Force 180 Cambium Networks

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Access Point in PDF format for free! Find your manual EPMP Force 180 - Cambium Networks and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPMP Force 180 by Cambium Networks.

USER MANUAL EPMP Force 180 Cambium Networks

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Cambium Networks

Model : EPMP Force 180

Category : Access Point