Integrity BL860c - Server HP - Free user manual and instructions
Find the device manual for free Integrity BL860c HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server Blade |
| Form Factor | Half-Height Blade for HP BladeSystem c-Class |
| Processor | Intel Itanium 2 (up to dual-core) |
| Memory | DDR2 ECC Registered, up to 128 GB |
| Storage | Up to two hot-plug SAS hard drives |
| Networking | Dual 10GbE integrated, plus optional mezzanine cards |
| Management | Integrated Lights-Out (iLO) 2 management |
| Dimensions (H x W x D) | 20.5 x 5.72 x 50.9 cm (8.07 x 2.25 x 20.04 in) |
| Weight | Approximately 8.2 kg (18.1 lb) |
| Power Supply | Dual redundant, 1200W each |
| Cooling | Shared enclosure fans; internal fans for processor |
| Expansion Slots | 2 mezzanine connectors for additional I/O |
| Operating Systems | HP-UX, Red Hat Linux, SUSE Linux, Windows Server |
| Maintenance | Hot-swap drives, fans, power supplies; tool-less access |
| Safety | Grounding strap required; proper enclosure installation |
| Spare Parts | Memory modules, hard drives, mezzanine cards, battery |
| Repairability | Field-replaceable units (FRUs); support contract recommended |
Frequently Asked Questions - Integrity BL860c HP
How do I power on the Integrity BL860c?
The blade server powers on automatically when inserted into an HP BladeSystem c-Class enclosure with power. Use the enclosure's Onboard Administrator to control power states.
What processors are compatible with the BL860c?
The BL860c supports Intel Itanium 2 processors, including single-core and dual-core versions. Check the QuickSpecs for specific model numbers.
How much memory can the BL860c support?
It supports up to 128 GB of DDR2 ECC Registered memory across 8 DIMM slots.
Can I use standard hard drives in the BL860c?
No, the BL860c uses hot-plug SAS hard drives designed for blade servers. SATA drives are not supported.
How do I access the management interface?
Use the Integrated Lights-Out (iLO) 2 via a dedicated Ethernet port. Default IP is assigned by the enclosure's DHCP.
What is the maximum power consumption?
The BL860c draws up to 1200W per power supply, but typical consumption is lower. Power is supplied through the enclosure backplane.
Can I install Linux on the BL860c?
Yes, Red Hat Enterprise Linux and SUSE Linux Enterprise Server are supported. HP-UX and Windows Server are also options.
How do I replace a failed hard drive?
The hard drives are hot-plug. Simply release the latch, remove the drive, and insert a new one. The RAID controller will rebuild automatically.
What safety precautions should I take?
Always use an anti-static wrist strap when handling components. Ensure the blade is properly seated in the enclosure to avoid electrical hazards.
Where can I find spare parts?
Spare parts such as memory, hard drives, and mezzanine cards are available through HP or authorized resellers. Use the serial number to identify compatible parts.
User questions about Integrity BL860c HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Integrity BL860c - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Integrity BL860c by HP.
USER MANUAL Integrity BL860c HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : Integrity BL860c
Category : Server