WJ-NV200 - Surveillance Camera PANASONIC - Free user manual and instructions
Find the device manual for free WJ-NV200 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Model | WJ-NV200 |
| Brand | Panasonic |
| Video Input | 4 channels, IP cameras |
| Recording Resolution | Up to 4K (3840x2160) per channel |
| Compression | H.265 / H.264 |
| Storage | 1x SATA HDD (up to 10TB) |
| Network Interface | 10/100/1000 Mbps Ethernet |
| PoE | 4x PoE (802.3af/at) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | Approx. 30W (without HDD) |
| Dimensions (W x D x H) | 320 mm x 250 mm x 44 mm |
| Weight | Approx. 2.0 kg (without HDD) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Main Functions | Live view, recording, playback, backup, motion detection, remote access |
| Mounting | Desktop or rack-mountable |
| Safety | CE, FCC compliant; surge protection |
| Maintenance | Clean with dry cloth; ensure ventilation |
| Spare Parts | Power adapter, remote control, screws, user manual |
| Warranty | 2 years (subject to region) |
Frequently Asked Questions - WJ-NV200 PANASONIC
How do I set up the Panasonic WJ-NV200 for the first time?
Connect the NVR to your network and power. Attach a monitor via HDMI or VGA. Use the included mouse to navigate the setup wizard. Assign an IP address or use DHCP. Then add IP cameras via the network.
Can I access the NVR remotely?
Yes, enable remote access in the network settings. Use the Panasonic Viewer app or a web browser by entering the NVR's IP address. Ensure port forwarding is configured on your router.
What hard drive is compatible with the WJ-NV200?
The NVR supports 3.5-inch SATA hard drives up to 10TB. For surveillance, use WD Purple or Seagate SkyHawk series.
How many cameras can I connect?
The WJ-NV200 supports up to 4 IP cameras. All 4 channels support PoE, so no separate power supply needed for cameras.
Does it support audio recording?
Yes, if your IP cameras have audio input, the NVR can record audio synchronously with video. Audio settings are in the recording configuration.
How do I perform a factory reset?
Power off the NVR, press and hold the reset button on the back panel (using a paperclip), then power on. Hold for 10 seconds until you hear a beep. Settings will revert to default.
What is the maximum recording resolution?
Each channel can record up to 4K (3840x2160) at 15 fps, or lower resolutions at higher frame rates. The total bandwidth is limited.
Can I export recorded footage?
Yes, from the playback screen, select time range and click export. Save to a USB drive inserted into the NVR. Formats include AVI and MP4.
How do I update the firmware?
Download the latest firmware from Panasonic's support site. Copy the file to a USB drive, insert into NVR, go to System > Update, and select the file. Do not power off during update.
What maintenance does the NVR require?
Regularly check for dust buildup and clean vents with a dry cloth. Ensure the hard drive is not full. Periodically backup important recordings and update firmware for security.
User questions about WJ-NV200 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual WJ-NV200 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-NV200 by PANASONIC.
USER MANUAL WJ-NV200 PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : WJ-NV200
Category : Surveillance Camera