WJ-NX400 - Surveillance Camera PANASONIC - Free user manual and instructions
Find the device manual for free WJ-NX400 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | Panasonic |
| Model | WJ-NX400 |
| Dimensions (W x H x D) | 430 mm x 88 mm x 350 mm |
| Weight | Approximately 6.5 kg |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Power Consumption | Approximately 60 W (without HDD) |
| Video Compression | H.265 / H.264 |
| Maximum Recording Channels | 16 channels |
| Hard Disk Drive Support | Up to 4 SATA HDDs (each up to 10 TB) |
| Network Interface | 1x 10/100/1000 Mbps Ethernet port |
| Main Functions | Real-time recording, remote monitoring, motion detection, playback, backup |
| Operating System | Embedded Linux |
| Cooling Method | Built-in fan |
| Cleaning Instructions | Use a soft, dry cloth to clean the exterior. Do not use liquid or aerosol cleaners. |
| Safety Precautions | Ensure proper ventilation; do not obstruct air vents. Disconnect power before cleaning. |
| Spare Parts & Repairability | Hard drives and power supply are replaceable. Other repairs should be performed by qualified service personnel. |
| General Information | Designed for 24/7 continuous operation in surveillance environments. |
Frequently Asked Questions - WJ-NX400 PANASONIC
How many cameras can the WJ-NX400 support?
The WJ-NX400 supports up to 16 channels for simultaneous recording and live viewing.
What video compression formats are supported?
It supports H.265 and H.264 compression for efficient bandwidth and storage usage.
Can I access the NVR remotely?
Yes, via the Panasonic i-PRO or compatible apps, you can view live feeds and playback from anywhere with an internet connection.
How do I install hard drives in the WJ-NX400?
Open the front panel, slide the HDD trays out, mount your SATA hard drives (up to 4 drives), and secure them. Refer to the manual for compatible HDD models.
What is the maximum storage capacity?
With up to 4 SATA HDDs of 10 TB each, the maximum internal storage is 40 TB.
Does the device support motion detection?
Yes, it has built-in motion detection that triggers recording and alerts. Sensitivity areas can be configured per camera.
How do I reset the WJ-NX400 to factory settings?
Press and hold the reset button (located on the back panel) for 5 seconds while the unit is powered on. All settings will be restored to default.
What are the power requirements?
It requires an AC input of 100–240 V at 50/60 Hz. The power adapter is built-in.
Is the NVR compatible with Panasonic cameras only?
While optimized for Panasonic IP cameras, it supports ONVIF-compliant cameras from other brands, but functionality may be limited.
How do I clean the device?
Use a soft, dry cloth to gently wipe the exterior. Do not use any liquids or sprays. Ensure the NVR is turned off and unplugged before cleaning.
User questions about WJ-NX400 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual WJ-NX400 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-NX400 by PANASONIC.