ZoneDirector 1200 - Controller Brocade - Free user manual and instructions
Find the device manual for free ZoneDirector 1200 Brocade in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless LAN Controller |
| Brand | Brocade (Ruckus) |
| Model | ZoneDirector 1200 |
| Form Factor | Rackmount 1U |
| Dimensions (W x D x H) | 17.3 x 10.5 x 1.75 in (440 x 267 x 44 mm) |
| Weight | 10 lbs (4.5 kg) |
| Power Supply | AC 100-240V, 50-60Hz, 150W max |
| Maximum Managed Access Points | Up to 96 APs |
| Maximum Concurrent Users | Up to 10,000 |
| Management Interface | Web GUI, CLI, SNMP, SSH, Telnet |
| Supported Wireless Standards | 802.11a/b/g/n/ac |
| Network Interfaces | 2 x Gigabit Ethernet, 1 x Console |
| Security Features | WPA2-Enterprise, 802.1X, ACLs, Guest Access |
| VLAN Support | 802.1Q, up to 4094 VLANs |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 5% to 90% non-condensing |
| Cooling | Built-in fans |
| Mounting | Rackmount kit included |
| LED Indicators | Power, System, Link/Activity |
| Regulatory Compliance | FCC, CE, IC, UL, VCCI |
| Package Contents | ZoneDirector 1200, power cord, rackmount kit, quick start guide |
Frequently Asked Questions - ZoneDirector 1200 Brocade
How to reset the ZoneDirector 1200 to factory defaults?
Press and hold the reset button on the front panel (using a paperclip) for 10 seconds until the status LED flashes. The device will reboot with factory settings.
How many access points can the ZoneDirector 1200 manage?
The ZoneDirector 1200 supports up to 96 Ruckus access points simultaneously.
Can I manage the controller remotely?
Yes, you can manage it via SSH, Telnet, or the web GUI over LAN or VPN. SNMP is also supported for monitoring.
What firmware version does the ZoneDirector 1200 run?
It runs ZoneDirector OS, typically version 9.8 or later. Check the system information page for exact version.
Is the ZoneDirector 1200 compatible with non-Ruckus APs?
No, it is designed exclusively for Ruckus Wireless access points and will not work with other brands.
How to update the firmware?
Download the firmware from Brocade support site, then upload it via the web GUI under Administration > Firmware Update. The device will reboot.
What is the default IP address and login?
Default IP is 192.168.0.2 (or 192.168.1.2 depending on version). Username: admin, Password: admin (or blank). Change immediately.
How to configure VLANs on the controller?
Go to Configuration > VLAN in the web GUI. Add VLAN IDs and assign them to SSIDs or interfaces. Note: Management VLAN can be set separately.
Does the ZoneDirector support PoE?
No, the ZoneDirector itself requires AC power. However, it can manage PoE-enabled access points directly.
What should I do if the controller is overheating?
Ensure proper ventilation and clean dust from vents. The operating range is 0°C to 40°C (32°F to 104°F). If issues persist, contact support.
User questions about ZoneDirector 1200 Brocade
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual ZoneDirector 1200 - Brocade and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZoneDirector 1200 by Brocade.
USER MANUAL ZoneDirector 1200 Brocade
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brocade
Model : ZoneDirector 1200
Category : Controller