FTXJ25MS - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free FTXJ25MS DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner, Wall Mounted Indoor Unit |
| Model | FTXJ25MS |
| Brand | Daikin |
| Cooling Capacity | 2.5 kW (approx. 8,500 BTU/h) |
| Heating Capacity | 3.2 kW (approx. 10,900 BTU/h) |
| Power Supply (Indoor Unit) | 220-240 V, 50 Hz, Single Phase |
| Indoor Unit Dimensions (W x H x D) | 800 x 290 x 210 mm |
| Indoor Unit Weight | 9.5 kg |
| Refrigerant | R32 |
| Main Functions | Cool, Heat, Fan Only, Dehumidifier, Auto Mode, Sleep Mode, Turbo Mode, Timer, Quiet Operation, Swing Louver |
| Airflow Rate (High) | 700 m³/h |
| Noise Level (Indoor, Low/High) | 22 / 42 dB(A) |
| Energy Efficiency Rating (EER) | 3.5 (cooling) |
| Seasonal Energy Efficiency Ratio (SEER) | 6.5 |
| Maintenance | Clean air filter every 2 weeks; replace every 3 months or as needed. Clean outdoor unit coils annually. |
| Safety Features | Earth leakage breaker, compressor thermal protector, auto restart after power failure, timer safety |
| Remote Control | Infrared wireless remote control included |
| Spare Parts | Air filter (Part No. KAF250A), remote control (Part No. ARC433A61) |
| Warranty | 2 years parts and labor (indoor unit), 5 years compressor (check local regulations) |
Frequently Asked Questions - FTXJ25MS DAIKIN
How do I clean the air filter on the Daikin FTXJ25MS?
Turn off the unit and open the front panel. Remove the filter by pulling it out. Wash with mild detergent and water, dry thoroughly, and reinsert. Clean every 2 weeks for optimal performance.
What is the recommended temperature setting for energy savings?
For cooling, set to 24-26°C (75-78°F); for heating, set to 20-22°C (68-72°F). Using the sleep mode also reduces energy consumption.
Why is the indoor unit blowing warm air in cooling mode?
Check if the mode is set to 'Cool'. Ensure the thermostat is set lower than room temperature. If the outdoor unit is not running, clean the condenser coils or check for a refrigerant leak.
How do I use the timer function on the remote control?
Press the 'TIMER' button repeatedly to select OFF timer or ON timer. Use the temperature up/down buttons to set the desired time (0.5-24 hours). Press 'SET' to confirm. The unit will turn off/on automatically.
What do the error codes E0, E1, E3 mean?
E0: Indoor unit PCB fault. E1: Communication error between indoor and outdoor units. E3: High pressure switch error. Contact a qualified technician for repairs.
Can the FTXJ25MS be used in winter for heating?
Yes, it has a heat pump function that provides heating down to -15°C outdoor temperature. Below that, efficiency may decrease. Use the 'HEAT' mode.
How often should I service the outdoor unit?
Schedule professional maintenance annually. Clear debris and leaves around the outdoor unit monthly. Ensure airflow is not blocked.
Is the outdoor unit very noisy?
The outdoor unit noise level is typically around 48-52 dB(A). Ensure it is installed on a stable surface and away from windows to minimize disturbance.
What refrigerant does the FTXJ25MS use?
It uses R32 refrigerant, which has lower global warming potential than R410A. It is flammable but handled safely in sealed systems. Do not attempt to recharge yourself.
How do I reset the remote control?
Remove the batteries for 30 seconds and reinsert. Press the 'RESET' button (if available) with a pin. Ensure the distance to the unit is within 7 meters and no obstacles.
User questions about FTXJ25MS DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual FTXJ25MS - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTXJ25MS by DAIKIN.