FBA50A2VEB - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free FBA50A2VEB DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Conditioning Unit (Ceiling Mounted Cassette) |
| Model | FBA50A2VEB |
| Brand | Daikin |
| Cooling Capacity | 5.0 kW (17,000 BTU/h) |
| Heating Capacity | 5.6 kW (19,100 BTU/h) |
| Power Supply | 220-240 V, 50 Hz, Single Phase |
| Dimensions (Unit) | 840 x 840 x 240 mm (W x D x H) |
| Weight (Indoor Unit) | 23 kg |
| Refrigerant | R32 |
| Airflow Rate (High) | 12.5 m³/min |
| Noise Level (Indoor) | 30-38 dB(A) |
| Filter Type | Washable, Antibacterial Filter |
| Control | Wired Remote Controller (Optional Wireless) |
| Operating Temperature Range | -10°C to 46°C (Cooling), -15°C to 24°C (Heating) |
| Color | White |
| Energy Efficiency (EER) | 3.2 (Cooling) |
| Energy Efficiency (COP) | 3.8 (Heating) |
| Installation Type | Ceiling Mounted, Ducted Connection |
| Protection Features | Auto Restart, Overheat Protection, Anti-Freeze |
| Maintenance | Clean filter every 2 weeks; Professional check annually |
| Warranty | Standard 2 years (Parts and Labor) |
Frequently Asked Questions - FBA50A2VEB DAIKIN
How do I clean the air filter on my Daikin FBA50A2VEB?
Turn off the unit and remove the front panel. Slide out the filters and wash them with warm water and mild detergent. Let them dry completely before reinstalling. Clean every 2 weeks for optimal performance.
What does the error code A1 mean on my Daikin air conditioner?
Error code A1 indicates a PCB (Printed Circuit Board) fault. Contact a qualified technician to diagnose and replace the faulty board.
Can the FBA50A2VEB be used for heating?
Yes, it is a reverse cycle heat pump system, providing both cooling and heating. The heating capacity is 5.6 kW.
What is the recommended room size for this unit?
With a 5.0 kW cooling capacity, it is suitable for rooms up to approximately 50 m² (540 ft²), depending on insulation and ceiling height.
How do I reset the timer on the remote controller?
Press the Timer Off button repeatedly until the timer display disappears. For a full reset, remove batteries from the remote for 30 seconds.
Is professional installation required for the FBA50A2VEB?
Yes, installation must be performed by a certified HVAC technician to ensure proper refrigerant handling, electrical connections, and drainage.
What type of refrigerant does this model use?
The Daikin FBA50A2VEB uses R32 refrigerant, which has lower global warming potential compared to R410A.
How do I switch between cooling and heating modes?
Press the Mode button on the remote controller until the desired icon (snowflake for cool, sun for heat) appears on the display.
What should I do if there is water leaking from the indoor unit?
Check if the drain pipe is blocked or tilted incorrectly. Also ensure the filter is clean. If the problem persists, contact a technician to inspect the condensate pump or drain pan.
Where can I download the full user manual?
You can download the manual in PDF format from notice-facile.com by searching for 'FBA50A2VEB' or visiting the Daikin official website.
User questions about FBA50A2VEB DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual FBA50A2VEB - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FBA50A2VEB by DAIKIN.
USER MANUAL FBA50A2VEB DAIKIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAIKIN
Model : FBA50A2VEB
Category : Air Conditioning