6000 series HQ6676 - Razor PHILIPS - Free user manual and instructions

Product Type	Electric Shaver
Brand	Philips
Model	6000 series HQ6676
Shaving System	Rotary, 3 heads
Cutting Elements	Self-sharpening blades
Power Source	Rechargeable battery
Battery Type	Nickel-Metal Hydride (NiMH)
Charging Time	Approximately 8 hours
Shaving Time	Up to 30 minutes
Voltage	100-240 V, 50/60 Hz
Washable	Shaving heads can be rinsed under tap
Cleaning Brush	Included
Charging Cord	Included
Weight	Approximately 200 g
Dimensions (H x W x D)	Approx. 15 x 5 x 4 cm
Replacement Heads	Type HQ8
Water Resistance	Not suitable for shower use
Color	Silver and black
Warranty	2 years
Indicators	LED charging indicator

Frequently Asked Questions - 6000 series HQ6676 PHILIPS

How do I clean the Philips 6000 series HQ6676 shaver?

Clean the shaving heads under running warm water, with the heads removed. Use the supplied brush to remove hair from the cutter. Do not use abrasive cleaners. Allow to dry fully before reassembling.

How long does the battery take to charge?

The battery takes approximately 8 hours to fully charge. A full charge provides up to 30 minutes of cordless shaving.

Can I use the shaver while it is charging?

Yes, the shaver can be used while connected to the charging cord, but it is recommended to use it cordless for better maneuverability.

What replacement heads does this model use?

This model uses Philips HQ8 replacement heads. It is recommended to replace them every 1-2 years for optimal performance.

Is the shaver waterproof?

The shaver is not fully waterproof. You can rinse the heads under the tap, but do not immerse the whole shaver in water or use it in the shower.

How do I know when to replace the shaving heads?

Replace the heads when the shaving performance decreases, or if they are damaged. A general guideline is every 12-18 months.

What voltage does the charger support?

The charger supports a wide voltage range of 100-240 V, 50/60 Hz, so it can be used worldwide with the appropriate plug adapter.

Can I use the shaver on wet skin?

The shaver is designed for dry shaving. While you can rinse the heads after use, it is not recommended to shave with wet skin or shaving cream.

How do I remove the shaving heads?

Press the release button on the shaver and lift the head unit. Then pull the individual heads from the trimmer. Clean or replace as needed.

What does the LED indicator mean?

The LED indicator lights up when charging and turns off when fully charged. A flashing light may indicate low battery or a need to clean the shaver.

USER MANUAL 6000 series HQ6676 PHILIPS

Read this user manual carefully before you use the appliance and save it for future reference.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Only use the mains cord supplied.
• Do not use a damaged mains cord.
• If the mains cord is damaged, always have it replaced with one of the original type in order to avoid a hazard.
• The appliance is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts.
• Charge, store and use the appliance at a temperature between 5°C and 35°C.
• Do not recharge the shaver in a closed pouch.
• Keep the appliance and the mains cord dry.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Charging

Make sure the appliance is switched off before you start to charge it.

Charge the appliance for at least 8 hours, but not more than 24 hours. Do not leave the appliance connected to the mains continuously.

To prevent the battery from going flat during shaving, you can also charge the shaver in between shaves, even if the battery is not completely empty yet. This will not damage the battery.

Charge indications

Charging

When you start charging the empty shaver, the charging light goes on.

Charging the appliance

Charge the appliance when:

• the appliance is new or has not been used for a long time
• motor stops or starts running slower

1 Put the appliance plug in the shaver.

2 Put the mains plug in the wall socket.

3 Remove the mains plug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged.

Cordless shaving time

A fully charged shaver has a cordless shaving time of up to 10 days.

Using the appliance

The shaver cannot be used directly from the mains.

Shaving

1 Switch on the shaver by pushing the on/off slide to position I.
2 Move the shaving heads quickly over your skin, making both straight and circular movements.
Shaving on a dry face gives the best results.
Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system.
3 Switch off the shaver by pushing the on/off slide to position 0.
4 Put the protection cap on the shaver every time you have used it, to prevent damage.

Trimming

For grooming sideburns and moustache.

1 Open the trimmer by pushing the slide upwards.

The trimmer can be activated while the motor is running.

2 Close the trimmer ('click').

Cleaning and maintenance

Regular cleaning guarantees better shaving performance.

For easy and optimal cleaning, the Philips Shaving Head Cleaner (type HQ100) is available. Ask your Philips dealer for information.

Note: The Philips Shaving Head Cleaner may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory.

You can also clean the shaver in the following way:

Every week: shaving unit and hair chamber

1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.
2 Clean the top of the appliance first, using the brush supplied.
3 Press the release button (1) and remove the shaving unit (2).

4 Clean the inside of the shaving unit and the hair chamber with the brush.

5 Put the shaving unit back onto the shaver.

Every two months: shaving heads

1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.

ENGLISH8

2 Press the release button (1) and remove the shaving unit (2).

3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).

4 Remove the cutters and guards and clean them with the brush supplied.

Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

5 Clean the cutter with the short-bristled side of the brush.

Brush carefully in the direction of the arrow.

6 Brush the guard.

7 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit (1) and turn the wheel clockwise (2).
8 Put the shaving unit back onto the shaver. For extra thorough cleaning, clean the shaving heads by putting them in a degreasing liquid (e.g. alcohol) every six months. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads.

Trimmer

Clean the trimmer every time you have used it.

1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.
2 Clean the trimmer with the brush supplied.
3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months.

Storage

Put the protection cap on the shaver to prevent damage to the shaving heads.
The appliance can be stored in the pouch supplied.

Replacement

Replace the shaving heads every two years for optimal shaving results.

Replace damaged or worn shaving heads with HQ55 Philips Shaving Heads only.

1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.
2 Press the release button (1) and remove the shaving unit (2).
3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).

4 Remove the shaving heads and place new ones in the shaving unit.

5 Put the retaining frame back into the shaving unit (1) and turn the wheel clockwise (2).

6 Put the shaving unit back onto the shaver.

Accessories

The following accessories are available:

• HQ55 Philips Shaving Heads.

• HQ100 Philips Shaving Head Cleaner (not available in China).

• HQ101 Philips Shaving Head Cleaning Fluid (not available in China).

• HQ110 Philips Shaving Head Cleaning Spray (not available in China).

Environment

• Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment.
• The built-in rechargeable shaver battery contains substances that may pollute the environment. Always remove the battery before you discard and hand in the shaver at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the shaver to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way.

Disposal of the battery

Only remove the battery if it is completely empty.

1 Switch off the shaver, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.
2 Let the shaver run until it stops, undo the screws and open the shaver.
3 Remove the battery.

Do not connect the shaver to the mains again after the battery has been removed.

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

1 Reduced shaving performance

Cause 1: the shaving heads are dirty.

The shaver has not been cleaned well enough or has not been cleaned for a long time.

Clean the shaver thoroughly before you continue shaving. See chapter ‘Cleaning and maintenance’.

Cause 2: long hairs are obstructing the shaving heads.

Clean the cutters and guards with the brush supplied. See chapter ‘Cleaning and maintenance’, section ‘Every two months: shaving heads’.

Cause 3: the shaving heads are damaged or worn.

Replace the shaving heads. See chapter 'Replacement'.

2 The shaver does not work when the on/off slide is pushed to position I.

Cause 1: the battery is empty.

Recharge the battery. See chapter 'Charging'.

Penting

Medan elektromagnet (EMF)

INDONESIA18

충전

6 바깥날을 청소하십시오.

Mengecas

6 Berus adangan.

BAHASA MELAYU38

การจัดเก็บ

Cât giữ

Bảo hành & dịch vụ

充電指示

充電

適合刮除鬢角及髭髴。

定期清潔以維持較佳的刮鬍效果。

必須將電池電力完全耗盡後才能拆卸電池。

充电指示

充电

用于修剪鬓角和小胡子。

5 将剃须刀头部件重新安装到剃须刀上。

每两个月：剃须刀头

5 用毛刷的短毛一侧清洁刀片。

按箭头方向仔细刷净。

6 刷净网罩。

每次使用后都要清洁修发器。

存放

仅在电池电量完全耗尽后方可取出电池。