IAN 290360 - Lint remover AQUAPUR - Free user manual and instructions

Find the device manual for free IAN 290360 AQUAPUR in PDF.

AQUAPUR IAN 290360 - Lint remover
📄 46 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AQUAPUR IAN 290360 - page 5
View the manual : Dansk DA Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
BrandAquaPur
ModelIAN 290360
Product TypeWater Filter Pitcher
Capacity2.5 Liters (filtered water)
MaterialsBPA-free plastic, activated carbon filter
Dimensions (H x W x D)26 x 25 x 15 cm
Weight (empty)0.8 kg
Weight (full)3.3 kg
Power SupplyNone (manual operation)
Filter TypeActivated carbon with ion exchange
Filter LifeApproximately 2 months or 100 liters
RemovesChlorine, taste, odor, sediment, heavy metals
InstallationNo installation required; fill and refrigerate
CleaningHand wash with mild soap; do not use abrasive cleaners
Filtration RateApproximately 1 liter per minute
CertificationsNSF/ANSI 42 certified
Included ItemsPitcher, lid, one filter cartridge, user manual
Replaceable PartFilter cartridge (model AQ-REFILL)

Frequently Asked Questions - IAN 290360 AQUAPUR

How often should I replace the filter?
It is recommended to replace the filter every 2 months or after 100 liters of use, whichever comes first.
Can I use this pitcher with hot water?
No, this pitcher is designed for cold tap water only. Do not use with hot or boiling water as it may damage the pitcher or filter.
How do I install the filter?
Remove the filter from its packaging, soak it in cold water for 5 minutes, then insert it into the reservoir until it clicks into place. Run two full pitchers of water through before drinking.
Is the pitcher dishwasher safe?
Only the lid and the reservoir top are top-rack dishwasher safe. The main body should be hand washed to preserve clarity.
What does the filter remove?
The filter reduces chlorine taste and odor, sediment, and some heavy metals like lead and mercury. It does not remove dissolved solids or bacteria.
Why is my water cloudy after a filter change?
Tiny air bubbles trapped in the new filter can cause temporary cloudiness. This is normal and will clear after a few minutes. If persistent, flush the filter with more water.
Can I store the pitcher in the refrigerator?
Yes, the pitcher is designed to fit in most refrigerator doors. Keep it filled and refrigerated for crisp, cold filtered water.
How do I clean the pitcher?
Wash with warm, soapy water using a soft cloth. Avoid abrasive sponges that may scratch. Rinse thoroughly before use.
Where can I buy replacement filters?
Replacement filters (model AQ-REFILL) are available on our website, at major retailers, or through customer support.
What is the warranty period?
AquaPur offers a 1-year limited warranty against manufacturing defects. Retain your purchase receipt for warranty claims.

User questions about IAN 290360 AQUAPUR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lint remover in PDF format for free! Find your manual IAN 290360 - AQUAPUR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 290360 by AQUAPUR.

USER MANUAL IAN 290360 AQUAPUR

LINT REMOVER AFR 3 C2

GB IE NI

LINT REMOVER

Operating instructions

DK

FABRIC SHAVER

Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the device.

DK

GB/IE/NI Operating instructions Page 1

Safety instructions....2

Package contents 5

Technical data 5

Appliance description 5

Inserting batteries 5

Usage 6

Removing / replacing the spacer..... 8

Cleaning and care 9

Emptying the fluff collector 9

Cleaning the housing and cutting head ..... 9

Disposal 10

Kompernass Handels GmbH warranty 11

Service 13

Importer 13

Read these operating instructions carefully before using the appliance for the first time, and retain them for future reference. Please pass these operating instructions on to any future owner(s).

Introduction

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, familiarise yourself with all handling and safety guidelines. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner(s).

Intended use

This lint remover is intended exclusively for the removal of lint and fluff from clothing in domestic environments. Do not use it in commercial or industrial environments.

Safety instructions

This appliance may be used by children aged 8 years and above and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children unless they are supervised.

To avoid damage, do not allow liquids to penetrate the appliance and do not submerge it in water.

Ensure that no foreign objects penetrate the appliance.

Never open the housing, except the battery compartment to replace the batteries; there are no user-serviceable parts inside.

In the event of malfunctions or obvious damage, please contact our Customer Service department.

If you do not intend to use the appliance for an extended period, remove the batteries – batteries can discharge themselves and then leak.

Should the batteries leak: Put on protective gloves and clean the battery compartment with a dry cloth.

Use ONLY the type of battery detailed in the Technical Data as replacements for discharged batteries. Do not throw the batteries into the fire. Do not short-circuit the batteries. Do not attempt to recharge the batteries. There is a risk of explosion! Keep batteries away from small children. Infants can put batteries into their mouths and swallow them. If a battery is swallowed, seek medical assistance IMMEDIATELY. There is a risk of fatal injury!

Package contents

Before using the appliance for the first time, check the package content to ensure that it is complete and free of visible damage.

◆ Lint remover ♦ Cleaning brush, protective cap, spacer ◆ 2 x batteries ♦ Operating instructions

Technical data

Power supply: 2 x 1.5 V, type AA/LR6/Mignon Voltage: 3 —— V (direct current)

Appliance description

① On/Off switch/Speed switch ② Battery compartment cover ③ Fluff collector ④ Shaver foil ⑤ Adjustable spacer ⑥ Protective cap ⑦ Cleaning brush

Inserting batteries

1) Pull off the battery compartment cover ②. 2) Insert the batteries as shown in the polarity diagram in the battery compartment. 3) Slide the battery compartment cover ② back on so that it clicks into place.

Usage

NOTE

This lint remover can damage structured fabrics or very soft materials such as angora. Therefore, always test the lint remover on an inconspicuous part of the garment and turn the transparent part of the spacer ⑤ first to the level "Thick" and then push the On/Off switch/Speed switch ① to speed level 1. The appliance now runs at speed level 1. In this way you can gently test whether the setting is sufficient for the garment without damaging it.

This appliance should not be brought into contact with moisture. Therefore, do not use the lint remover on moist fabrics.

1) Lay the garment on a flat surface, such as an ironing board. Ensure that the surface to be processed has no wrinkles. Otherwise, the garment could be damaged.

2) Turn the spacer ⑤ to the desired position or remove it completely (see Chapter "Removing/replacing the spacer"):

  • "Thick" for large bobbles and coarse textiles (large distance to the cutter knives)
  • "Thin" for small lint/bobbles and fine textiles (small distance to the cutter knives)

- Remove the spacer ⑤, only for very fine lint (virtually no spacing to the cutter knives).

3) Push the On/Off switch/Speed switch ① to the required speed level. We recommend that you start working at speed level 1. If the results are satisfactory and you feel comfortable handling the appliance then you can switch up to speed level 2. 4) Guide the shaver foil ④ lightly and without pressure over the material. The fluff and bobbles will be shaved off and collected in the fluff collector ③. 5) When you want to stop, push the On/Off switch/Speed switch ① back to speed level 0.

NOTE - SAFETY CUT-OUT

This appliance is equipped with a safety cut-out. If you apply excessive pressure, the blades under the shaver foil ④ will stop. As soon as the pressure is reduced, the blades will resume moving.

NOTE

Empty the fluff collector ③ regularly. If the fluff collector ③ is overfilled, the cutting blades will work more slowly even though the batteries are not yet weak.

Removing / replacing the spacer

To attach the spacer ⑤, place it on the cutting head and press it firmly. Ensure that the two small tabs on the spacer ⑤ grip into the two recesses on the appliance:

Technical diagram of a mechanical device with Chinese annotations indicating directional arrows and component labels.

To remove it, pull the spacer ⑤ forwards and off. To protect the shaver foil ④, you should remove the spacer ⑤ when not using the appliance and place the protective cap ⑥ on the shaver foil ④.

Cleaning and care

Emptying the fluff collector

1) First pull the fluff collector ③ a little way down and lift it off. 2) Empty out the textile fluff. 3) Replace the fluff collector ③ so that it is firmly in place.

Cleaning the housing and cutting head

ATTENTION! MATERIAL DAMAGE!

Do not use abrasive, aggressive or chemical cleaning agents. These could damage the surface of the appliance!

  • Clean the housing, the removed spacer ⑤ and the protective cap ⑥ with a moist cloth. Unscrew the shaver foil ④ from the appliance. Clean the shaver foil ④ with a slightly damp cloth.

AQUAPUR IAN 290360 - ATTENTION! MATERIAL DAMAGE! - 1

WARNING! RISK OF INJURY!

Be careful when handling the blades under the shaver foil ④. These are very sharp and can easily be damaged.

♦ Brush fluff and lint remnants from the cutter knives with the cleaning brush ⑦. When all parts are well dried, screw the shaver foil ④ back on. ◆ Replace the spacer ⑤ so that it is seated firmly.

Disposal

AQUAPUR IAN 290360 - Disposal - 1

Under no circumstances should the appliance be disposed of in standard domestic waste. This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the appliance via an approved waste disposal company or your municipal waste disposal facility. Please observe applicable regulations. Please contact your waste disposal facility if you are in any doubt.

Disposal of (rechargeable) batteries

Simple line drawing of a trash bin with crossed lines indicating no waste or restriction (no text or symbols).

Used (rechargeable) batteries should not be disposed of in domestic waste. Consumers are legally obliged to dispose of (rechargeable) batteries at a collection point in their community/city district or at a retail store.

The purpose of this obligation is to ensure that (rechargeable) batteries are disposed of in an environmentally friendly manner. Only dispose of (rechargeable) batteries when they are fully discharged.

AQUAPUR IAN 290360 - Disposal of (rechargeable) batteries - 2

The packaging is made of environmentally friendly materials which you can dispose of at your local recycling centre.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.

If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

AQUAPUR IAN 290360 - Warranty claim procedure - 1

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

AQUAPUR IAN 290360 - Service - 1

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: kompernass@lidl.co.uk

AQUAPUR IAN 290360 - Service Great Britain - 1

Service Ireland

Tel.: 1890 930 034

(0.08 EUR/min, peak)

(0.06 EUR/min, off-peak)

E-Mail: kompernass@lidl.ie

IAN 290360

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Table of Contents

Introduction 16

Scope of application 16

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Table of contents

Introduction 30

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Last Information Update · Tilstand af information

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AQUAPUR

Model : IAN 290360

Category : Lint remover