EDE77550W - Tumble dryer ELECTROLUX - Free user manual and instructions

Product Type	Tumble Dryer
Brand	Electrolux
Model	EDE77550W
Height	85 cm
Width	60 cm
Depth	60 cm
Weight	45 kg
Power Supply	220-240 V, 50 Hz
Drum Capacity	7 kg
Drying System	Condenser
Energy Class	C
Annual Energy Consumption	560 kWh
Noise Level	65 dB(A)
Number of Programs	15
Control Type	Electronic with Display
Delay Start	Yes, up to 20 hours
Child Lock	Yes
Reverse Tumble Action	Yes
Lint Filter Indicator	Yes
Water Tank Full Indicator	Yes
Self-Cleaning Condenser	Yes
Dimensions (HxWxD)	850 x 600 x 600 mm

Frequently Asked Questions - EDE77550W ELECTROLUX

How do I clean the lint filter on my Electrolux EDE77550W?

Remove the lint filter located inside the drum door. Rinse it under warm water to remove residue, dry it thoroughly, and replace it before each use. Regular cleaning ensures efficient drying and prevents overheating.

What should I do if the dryer does not start?

Check that the door is fully closed and the child lock is not activated. Ensure the power cord is plugged in and the circuit breaker is not tripped. If it still won't start, try selecting a different program. If the issue persists, contact Electrolux support.

How can I reduce drying time?

Ensure the load is not too large and that clothes are spun at a high speed in the washing machine. Clean the lint filter and condenser regularly. Select a high heat program for cottons, but avoid overloading the drum.

What do the error codes on the display mean?

Common error codes include E11 (heating issue), E42 (motor problem), and E61 (electronic fault). Refer to the user manual for a complete list. For persistent errors, unplug the dryer for a few minutes and restart. If the code reappears, call service.

Can I dry delicate fabrics in this dryer?

Yes, use the Delicate or Low Heat program. Always check garment care labels. For items labeled 'tumble dry low' or 'do not tumble dry,' follow the instructions to avoid damage.

How often should I clean the condenser?

Clean the condenser every month or when the 'Clean Condenser' light appears. Remove the condenser unit from the bottom front, rinse it with water, and let it dry before reinserting. A clean condenser improves energy efficiency.

Why is the drying cycle taking too long?

Possible causes: overloaded drum, clogged lint filter or condenser, low spin speed in washer, or high ambient humidity. Check each component and adjust the load size. Use the Time Dry option if needed.

How do I use the delay start feature?

Press the Delay button repeatedly to set the desired delay in hours (up to 20). Then press Start. The dryer will begin the cycle after the set delay. This is useful for taking advantage of off-peak energy rates.

Is it normal for the dryer to produce steam?

Yes, steam is produced during the drying process, especially at the beginning. The condenser turns steam into water, which collects in the water tank. If you see excessive steam, check that the condenser is properly installed.

What is the recommended way to unload the dryer?

Remove clothes immediately after the cycle ends to prevent wrinkles. Shake each item to release trapped hot air and allow them to cool. If you cannot unload right away, use the Anti-Crease option that periodically tumbles the load.

USER MANUAL EDE77550W ELECTROLUX

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Contents

Important safety information 2

Product description 4

Control Panel 4

Before first use 5

Sorting and preparing laundry 5

Programme chart 6

Daily use 8

Cleaning and maintenance 10

What to do if ... 11

Machine settings 12

Technical data 13

Installation 13

Environment 16

Service 17

Subject to change without notice

Important safety information

Important! In the interest of your safety and to ensure correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it throughout its life will be properly informed on appliance use and safety.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using.
• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
• In order to avoid danger of fires caused by excessive drying, do not use appliance to

dry the following items: Cushions, quilts and the like (these items accumulate heat).

• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
• Always unplug the appliance after use, clean and maintenance.
• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
• Items that have been soiled with substances such as cooking oil, acetone, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
• Danger of explosion: Never tumble dry items that have been in contact with inflammable solvents (petrol, methylated spirits, dry cleaning fluid, and the like). As these substances are volatile, they could cause an explosion. Only tumble dry items washed with water.
• Risk of fire: Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer.
• If you have washed your laundry with stain remover, you must execute an extra rinse cycle before loading your tumble dryer.

- Please make sure that no gas lighters or matches have accidentally been left in pockets of garments to be loaded into the appliance.

Warning! Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. Risk of fire!

• Risk of electric shock! Do not spray down the appliance with jets of water.
• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that items will not be damaged.
• Ensure you have adequate ventilation in the installation room to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.

Installation

• This appliance is heavy. Care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
• All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
• Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
• Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely. • After having installed the appliance, check that it is not pressing or standing on its electrical supply cable or/and inlet hose.
• If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (optional accessory).

Use

- This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

1) Only dryers equipped with internal drum light.

• Only wash fabrics which are designed to be machine dried. Follow the instructions on each garment label.
• Do not dry unwashed items in the tumble dryer.
• Do not overload the appliance. See the relevant section in the user manual.
• Clothes which are dripping wet should not be placed in the dryer.
• Garments which have been in contact with volatile petroleum products should not be machine dried. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
• Never use the tumble dryer if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the tumble dryer is accessible.
• Fabric softeners, or similar products should be used as specified by the fabric softener instructions.
• Caution - hot surface : Do not touch the door light cover surface when the light is switched on. ¹⁾ • Hot surface: Do not touch the back of the appliance while it is operating!

Child safety

• This machine is not intended for use by young children or infirm persons without supervision.
• Children often do not recognize the hazards associated with electrical appliances. Children should be supervised to ensure that they do not play with the appliance.
• The packaging components (e.g., plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children's reach.
• Keep all detergents in a safe place out of children's reach. • Make sure that children or pets do not climb into the drum.

Product description

1 Control panel 2 Door 3 Fluff filter 4 Rating plate

5 Adjustable feet 6 Sideways vent outlets / back vent outlet 7 Ring nut 8 Lamp for inside light

Control Panel

1 Programme knob and "O" (OFF) switch 2 Function buttons 3 START PAUSE button 4 FILTER light

5 DELAY START button 6 Display

What is shown in the display

SYMBOL DESCRIPTION

2.30

Time to end (time of time program, time of start delay)

SYMBOL DESCRIPTION

	Child lock
	Delay start
	Drying phase
	Cooling phase
	Anticrease guard phase
Err	Error, wrong selection

Before first use

In order to remove any residues which may have been produced during production, wipe the dryer drum with a damp cloth or carry out

a brief drying cycle (ca. 30 min.) with damp cloths in the machine.

Sorting and preparing laundry

Sorting laundry

- Sort by fabric type:

– Cotton/linen for programmes in programme group.

- Mixtures and synthetics for programmes in SYNTHETICS programme group.

- Sort by care label: The care labels mean:

Drying in the tumble dryer possible in principle

Drying at normal temperature

Drying at reduced temperature (press DELICATE button!)

Drying in the tumble dryer not possible

Important! Do not place in the appliance any wet laundry which is not specified on the care label as being suitable for tumble-drying. This appliance can be used for all wet laundry items which are labelled as suitable for tumble-drying.

• Do not dry new, coloured textiles together with light-coloured laundry items. Textile colours may bleed.
• Do not dry cotton jersey and knitwear with the EXTRA programme. Items may shrink!
• Wool and wool-like textiles can be dried using the WOOL CARE programme.

Preparing laundry

• To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties or ribbons (e.g. of aprons).
• Empty pockets. Remove metal items (paper clips, safety pins, etc).
• Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks, the cotton layer should be outermost). These fabrics will then dry better.

Important! Do not overload the appliance. Observe max. loading volume of 7 kg.

Laundry weights

Type of laundry	Weight
Bathrobe 1200 g
Napkin 100 g
Quilt cover 700 g
Sheet 500 g
Pillow case 200 g
Tablecloth 250 g
Towelling tow-el	200 g
Tea cloth 100 g
Night dress 200 g
Ladies' briefs 100 gMan's work shirt
	600 g
Man's work shirt	200 g
Man's pyjamas	500 g

Type of laundry	Weight
Blouse 100 g
Men's under-pants	100 g

Programme chart

Programmes	max. load (weight when dry)	Additional functions/options Application/properties		(KCKH)
	COTTONS EXTRA	7 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	Thorough drying of thick or multi- lay-ered fabrics, e.g. terry towelling items, bathrobes.
	COTTONS STRONG	7 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	Thorough drying of thick or multi- lay-ered fabrics, e.g. terry towelling items, bathrobes.
	COTTONS 1)UP-BOARD	7 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	Thorough drying of fabrics of even thicknesses, e.g. terry towelling items, knitwear, towels.
	COTTONS DAMP	7 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	For thin textiles which are still to be ironed, e.g. knitted items, cotton shirts.
	COTTONS IRON DRY	7 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	For thin fabrics which are also to be ironed, e.g. knitwear, cotton shirts.
	SYN-THETICS EX-TRA	3 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	Thorough drying of thick or multi-lay-ered fabrics, e.g. pullovers, bedding, table linen.
	SYN-THETICS 1) CUPBOARD	3 kg	DELICATE, LONG ANTI-CREASE, BUZZER, DELAY START	For thin fabrics which are not ironed, e.g. easy care shirts, table linen, baby clothes, socks, lingerie with bones or wires.
Programmes	max. load (weight when dry)	Additional functions/options	Application/properties	Care mark
SYN-THETICS IRON DRY	3 kg	DELICATE, LONG ANTI-CREASE, BEUZZER, DELAY START	For thin fabrics which are also to be ironed, e.g. knitwear, cotton shirts.	2)
TIME	7 kg	DELICATE, LONG ANTI-CREASE, BEUZZER, DELAY START, TIME	For further drying of individual items of laundry.
MIX	3 kg	3) DELICATE, LONG ANTI-CREASE, BEUZZER, DELAY START	For drying cotton and synthetic fabrics, uses low temperature.
EASY IRON	1 kg (or 5 shirts)	3) DELICATE, LONG ANTI-CREASE, BEUZZER, DELAY START	Special programme with anti-crease mechanism for easy care textiles such shirts and blouses; for minimum ironing effort. The result depends on the type and quality of textiles. (The loading volume corresponds to approx. 5 to 7 shirts.) Recommendation: Place textiles in the dryer straight after spinning. Once dried, immediately remove textiles and place on clothes hanger.
JEANS	7 kg	, DELICATE LONG ANTI-CREASE, BEUZZER, DELAY START	For leisure clothing, such as jeans, sweat-shirts, etc., of different material thicknesses (e.g. at the neck, cuffs and seams).
WOOL CARE	1 kg	DELICATE, BEUZZER, DELAY START	is special programme for briefly treating woollens with warm air after they have been dried naturally, worn or stored for long periods. Wool fibres are aligned and the wool becomes soft and snugly.
COOLING	7 kg	BEUZZER	Special programme, lasting around 10 minutes, for refreshing or gently cleaning textiles with commercially available dry cleaning sets. (Only use those products which are declared as suitable for the drier by the manufacturer; please observe the manufacturer's instructions for use.)

1) In accordance with IEC61121

2) select option 3) Automatic

Daily use

Switching machine on

Turn the programme selector to any programme. The machine has been switched on.

Door opening and laundry loading

1. Open loading door:

Push against the loading door (push point)

1. Load your laundry (do not force it in).

Caution! Do not jam laundry in between the loading door and rubber seal.

1. Close loading door securely. Lock must audibly lock.

Selecting the programme

Use the programme selector to set the programme you require. The estimated time to end of the programme appears in the LCD in h:mm format (hours:minutes).

During the cycle, time elapses by steps of one minute; less than 1 hour, the leading zeros are not shown (e.g., "59", "5", "0");

Selecting additional functions

You can choose from the additional functions:

Button 1 - DELICATE

Button 2 - LONG ANTI-CREASE

Pressing this button allows drying to be performed at a lower temperature, for delicate items. The corresponding pilot light comes on. This option can also be used for time controlled drying.

Anticrease

A long anti-crease phase lengthens the anti-crease phase (30 min.) at the end of the drying additionally by 60 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. Phase lasts in total 90 minutes. The laundry can be removed at any time during the anti-crease phase.

When the option is active, the light is on.

Buzzer

When the drying cycle has finished, an intermittent audible signal will sound. By depressing the button, the acoustic signal is switched off in the following cases:

• when selecting the programme
• when depressing the buttons
• when the programme selector dial is turned to another position during the programme or when you depress an option button during the cycle
• at the end of the programme. The corresponding light comes on.

Time

Use the TIME button to select the programme duration after setting the TIME programme. You can select a programme duration from 20 min. to 3 hours in 10-minute steps.

1. Turn the programme selector to the programme.
2. Press the button repeatedly until the desired programme duration is shown in the display, e.g. 0 for a programme of 20 minutes.

If the programme duration is not selected, the duration is automatically set to 10 mins.

Delay start

With the DELAY button, you can delay the start of a programme by between 30 minutes (30') and a maximum of 20 hours (20h).

1. Select the programme and additional functions.
2. Press the Delay button as many times as necessary until the required time of the delay appears on the display, e.g. 12 H if the programme is to be started in 12 hours.

If the display is showing 20 H and you press the button again, the time delay will be cancelled. The display will show 0 and then the duration of the selected programme.

1. To activate the delay timer, press the Start/Pause button. The amount of time remaining until the programme is set to start is continuously displayed (e.g. 15h, 14h, 13h, ... 30' etc).

Setting child lock

The child lock can be set to prevent a programme being accidentally started or a programme in operation being accidentally changed. The child lock function locks all buttons and the programme knob. The child lock can be activated or deactivated by holding down the BUZZER and TIME buttons simultaneously for 5 seconds.

- Before programme is started: Appliance cannot be used - After programme is started: Programme in operation cannot be changed

The 📋 icon appears in the display to indicate that the child safety device is activated. The child safety device is not deactivated once the programme comes to an end. If you want to set a new programme, you must first deactivate the child safety device.

Starting the programme

Press the START / PAUSE button. The programme is started.

The programme phase is shown in display by appropriate icons. From left to the right, from drying 🔄, anticrease 🔒 to cooling 🔔

Changing programme

To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to "O" (OFF) position. The programme is cancelled.

The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob or if an function button (excluding the button) is pressed, led above START/PAUSE button starts flashing temporarily in yellow. The drying programme is not however affected by this (laundry protection).

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-crease and filter icon appear dash. If the (Buzzer)

Once the button has been pressed, an acoustic signal sounds intermittently for about one minute.

The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.) If the Long Anticrease function has been selected, the anti-crease phase is lengthened by 60 minutes.

1. Open the door.
2. Remove the laundry.
3. Remove the filter after the clothes have been removed. Clean the filter.

Warning! Before you place the filter, check that there is nothing inside the filter seat. 4. Turn the programme selector to "O" (OFF).

Important! Clean the filter after each drying cycle. 5. Close the door.

Cleaning and maintenance

Warning! The tumble dryer is not to be used if industrial chemicals have been used for cleaning!

Cleaning the fluff filter

The filter collects all the fluff which accumulates during drying. To ensure that the dryer works perfectly, the fluff filter must be cleaned after every drying cycle.

The warning light FILTER is on to remind you of this operation.

Caution! Never operate the dryer without the fluff filter or with a damaged or blocked fluff filter.

Open the loading door and remove the laundry. 2. Remove the filter which is built into the lower part of the loading aperture.

Open the filter by pressing the button, using two fingers in the slots. Clean the filter using a damp hand or cloth. After a period of time, a patina due to detergent residue on laundry forms on the filters. When this occurs, clean the filter with warm water using a brush. Close the filter and do not forget to put it back.

Warning! Before you place the filter, please check that there is nothing inside the filter seat.

1. The filter can be positioned only to one side. If the position is wrong, the filter overhangs.

If the filter will not snap into place, the loading door cannot be closed.

Cleaning the door

Clean periodically the interior part of the door to remove any fluff. Accurate cleaning ensures correct drying.

Cleaning the drum

Caution! Do not use abrasives or steel wool to clean the drum. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper

than expected when removed from the dryer.

Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs.

Clean operating screen and housing

Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing.

What to do if ...

Troubleshooting by yourself

If, during operation, the error code E... (plus number or letter) appears on the LCD: Switch the machine off and on again. Reset pro-

gramme. Press the START / PAUSE button. If the error is still displayed, please inform your local Service Force Centre and quote the error code.

Problem Possible cause Remedy
Dryer does not work.	Mains plug is not plugged in or fuse is not working correctly.	Plug in at mains socket. Check fuse in fuse box (domestic installation).
	Loading door is open. Close loading door.
	Have you pressed the START / PAUSE button?	Press the START / PAUSE button again.
Drying results unsatisfactory.	Wrong programme selected.	Select a different programme the next time you dry (see “Programme chart” chapter).
	Filter clogged. Clean filter.
	Overloading of laundry.	Observe recommended loading volumes.
	Ventilation slots covered up. Uncover ventilation slots.
	Residue on inside surface of drum or drum ribs.	Clean inside surface of drum and drum ribs.
	Conductance of water at installation site differs from standard setting of machine.	Re-programme standard setting for degree of drying (see ‘Programming options’ chapter).
Loading door does not close.	Filter not in place.	Install filter into place.
When a button is pressed, Err appears on the LCD.	Washing protection. After the start of the programme, the option can no longer be set.	Turn the programme knob to "O" (OFF) . Set the programme again.
Drum light does not work.	Programme selector in "O" (OFF) position.	Turn programme selector to any programme.
	Defective light bulb.	Replace light bulb (see next section).
Displayed programme time changes erratically or stays unchanged for a long time.	Programme time is corrected automatically depending on type and volume of laundry and level of dampness.	Automatic process; this is not a machine fault.
Drying cycle ends shortly after programme starts.	Not enough washing loaded or washing loaded is too dry for selected programme.	Select time programme or higher drying level (e.g. EXTRA instead of CUPBOARD).
Drying cycle lasts an unusually long time. Note: After around 5 hours the drying cycle ends automatically.	Filter clogged. Clean filter.
	Load volume too big. Reduce load volume.
	Laundry insufficiently spun.	Laundry must be adequately spun.

Changing the bulb for interior lighting

Only use a special bulb which is designed specially for dryers. The special bulb can be obtained from your local Service Force centre.

Warning! When the appliance is switched on, the interior lighting switches itself off after 4 minutes when the door is open.

Warning! Do not use standard bulbs! These develop too much heat and may damage the machine!

Warning! Before replacing the bulb, disconnect the mains plug.

1. Unscrew cover above the bulb (this can be found directly behind the loading aperture, at the top; refer to "Description of machine" section.)
2. Replace defective bulb.
3. Screw cover back down.

Check the correct positioning of o-ring gasket before screwing back the door light cover. Do not operate the dryer when missing o-ring gasket on door light cover.

Warning! For safety reasons, the cover must be screwed down tightly. If this is not done, the dryer must not be operated.

Machine settings

SIGNAL permanent off

1. Turn the programme selector to any programme.
2. Press simultaneously the LONG ANTI-CREASE and BUZZER buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off. You can use button to activate or deactivate sound but machine does not memorize your selection.

Water hardness

Water contains a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water compared to those prefixed by the factory could slightly influence the residual humidity of the laundry at the end of the cycle. Your

dryer allows you to regulate the sensitivity of the drying sensor based on conductivity values of the water.

1. Turn the programme selector to any programme.
2. Press simultaneously the BUZZER and START PAUSE buttons and hold down for approx. 5 seconds. The current setting is on the display: 0 - low conductivity <300 micro S/cm, 0 = medium conductivity 300-600 micro S/cm, 0 = high conductivity >600 micro S/cm
3. Press the START PAUSE button sequentially until you set desired level.
4. To memorize setting press simultaneously the BUZZER and START PAUSE buttons or turn knob to "O" (OFF) position

Technical data

CE

Height x width x depth 85 x 60 x 58 cm
Drum volume 108 l
Depth with loading door open 109 cm
Height can be adjusted by 1.5 cm
Weight when empty approx. 32.5kg
Loading volume (depends on programme)1)	max. 7 kg
Voltage 230 V
Required fuse 10 A
Total power 2200 W
Energy efficiency class	C
Energy consumption (7 kg of cotton, pre-drained at 1000 rpm) 2)	3.9 kWh
Average annual energy consumption 262.6kWh
Use Domestic
Permissible ambient temperature + 5°C to + 35°C

Consumption values

The consumption values have been established under standard conditions. They may deviate when the machine is operated in domestic circumstances.

Programme	Energy consumption in kWh / average drying time in min.
COTTONS CUPBOARD2)	3.9 / 115 (7 kg load pre-drained at 1000 rpm)
COTTONS IRON2)	3/ 85 (7 kg load pre-drained at 1000 rpm)
SYNTHETICS CUPBOARD2)	1.18 / 35 (3 kg load pre-drained at 1200 rpm)

1) Different loading volume data may be needed in some countries as a result of different measuring methods. 2) in accordance with EN 61121

Installation

Important! The appliance must be moved in vertical position for transport.

Appliance positioning

• It is recommended that, for your convenience, the machine is positioned close to your washing machine.
• The tumble dryer must be installed in a clean place, where dirt does not build up.
• Air must be able to circulate freely all round the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.
• To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.
• Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.
• The feet must never be removed. Do not restrict the floor clearance through deeply carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.

Important! The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The appliance must therefore not be installed on floors which are not resistant to high temperatures.

When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance.

Warning! Should the appliance be moved, it must be transported vertically. Warning! The appliance must not be installed behind the lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance.

Removing transport safety packaging

Caution! Before use all parts of the transport packaging must be removed.

1. Open loading door.
2. Pull off adhesive strips from inside machine on top of drum.
3. Remove foil hose and polystyrene padding from the machine.

Fitting the vent hose

To simplify the installation, there is a choice of vent outlets: one at the back, the others in the left and right-hand side. Connect the hose to whichever is the more convenient by pulling the ring nut (A) from the vent outlet at the back, screwing it on to the hose and pushing it firmly back into place. The unused vents should now be sealed with the special snap covers provided.

If the hose is long and the room temperature low, the moisture might condense to water inside the hose. This is an unavoidable natural phenomenon. To prevent this water from lying in the hose or flowing back into the tumble dryer, it is advisable to drill a small hole (via. 3 mm) in the lowest point of the hose and to place a small container below it. (See picture, point B).

Once connected to the dryer, run the vent hose to the desired outlet point, ensuring that the run's overall length is less than 2 m, and that it contains no more than two bends. As to the outlet itself, if you have decided on a fixed wall/window grille, a good local builder's merchant should be able to supply you with the necessary fittings and installation advice.

Warning! It is important not to connect the vent hose to, for example, a cooker hood, or a chimney or flue pipe designed to carry the exhaust from a fuel burning appliance.

Note that to avoid condensation problems, it is essential that the dryer be fitted with the flexible hose to carry its “exhaust” at least beyond the kitchen units; preferable outside the kitchen. In order to prevent the appliance from overheating, it is important that the

steam exhaust is unobstructed. Therefore, in case of a permanent hose fitted to an exterior wall or ceiling, it must be ensured an exhaust capacity of at least 150 m3/h. If the dryer is fitted next to kitchen units, make sure that the vent hose is not squashed. If the hose is partially squashed, drying efficiency will be reduced, resulting in longer drying times and higher energy consumption. If the hose is completely squashed, the safety cut-outs with which the machine is fitted may operate. When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance.

Door reversal

To make it easier to load or unload the laundry, the door can be reversed. The door must only be reversed by an authorised service engineer. Please contact your local Service Force Centre. The engineer will carry out the door reversal at your cost.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Product description” chapter).

Connect the machine to an earthed socket, in accordance with current wiring regulations.

Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center. Warning! The plug must be accessible after installing the machine.

Special accessories Stacking kit

A special stacking kit is available through your dealer, to enable the mounting of the dryer on top of a front loading washing machine with cover's depth between 48 and 60 cm. Read carefully the instructions supplied with the kit.

Environment

The symbol ☒ on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.

Warning! When disposing of old appliances, remove the mains cable and dispose of together with the plug. Remove the door hook and ensure it is no longer lockable to prevent young children being trapped inside.

Environmental tips

• In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore needed when washing.
• Your dryer will function most economically if you:
• always keep the ventilation slots on the base of the dryer unobstructed; – use the loading volumes specified in the programme overview;
• clean the filter after each drying cycle;
• spin the laundry well before drying. Example: Consumption data – depending on spinning speed – for 7 kg of laundry, dried using the COTTONS CUPBOARD programme.

Pre-draining Drying cycle
Revolutions per minute	Residual dampness
	in litres as a %	Energy in kWh
1000 4.20 60 3,9
1400 3.64 52 3,7

Service

In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions - see chapter What to do if....

If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information:

• Model description
• Product number (PNC)
• Serial number (S No. is on rating plate stuck to the product - to find it see chapter Product description))
• Type of fault – Any error messages displayed by the appliance

So that you have the necessary reference numbers from your appliance at hand, we recommend that you write them in here:

Model description:

PNC:

S No:

Electrolux. Thinking of you.

Button 1 - DELICATE (FINE FABRICS) Button 2 - LONG ANTICREASE (LONG ANTI-CREASE)

Button 3 - BUZZER

Button 4 - TIME (DURATION)

Button 6 - DELAY (DELAYED START)

DELICATE (Fine Fabrics)

Installing the ventilation hose