IM7200 - Server Opengear - Free user manual and instructions
Find the device manual for free IM7200 Opengear in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Console Server / Remote Management Gateway |
| Model | IM7200 |
| Brand | Opengear |
| Form Factor | 1U Rackmount |
| Dimensions (H x W x D) | 44.45 x 482.6 x 300 mm |
| Weight | 5.5 kg |
| Power Supply | Dual redundant, 100-240 VAC, 50/60 Hz, 60 W typical |
| Network Interfaces | 2 x Gigabit Ethernet |
| Serial Ports | 8 or 16 RS-232 (DB9/RJ45) |
| USB Ports | 2 x USB 2.0 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Primary Functions | Remote console access, out-of-band management, KVM over IP, serial console server, IPMI, power management |
| Management Access | Web GUI, SSH, Telnet, SNMP, Serial |
| Security Features | SSL/TLS, SSH, RADIUS, TACACS+, LDAP, Secure Boot |
| Maintenance & Cleaning | Use dry compressed air to clean vents; avoid liquids; check fans annually |
| Spare Parts & Repairability | Replaceable fans, power supply modules, and serial port cards; contact Opengear support |
| Certifications | FCC, CE, UL, RoHS |
| Warranty | Limited 2-year hardware warranty |
Frequently Asked Questions - IM7200 Opengear
What is the default IP address of the Opengear IM7200?
The default IP address is 192.168.0.1 with subnet mask 255.255.255.0. Access via HTTPS on port 443.
How do I reset the IM7200 to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What are the default login credentials?
Default username is root and password is default. It is strongly recommended to change the password upon first login.
How can I access the serial console remotely?
Use the web interface to configure serial ports, then connect via SSH to the IM7200's IP address on the assigned port (e.g., port 2000 for serial port 1).
How do I upgrade the firmware?
Download the latest firmware from Opengear's support site. In the web GUI, go to 'Administration' > 'Firmware Upgrade', upload the file, and follow the prompts.
Can I use the IM7200 as a VPN gateway?
Yes, the IM7200 supports OpenVPN and IPsec VPN. Configure VPN in the 'Network' > 'VPN' section of the web interface.
What types of serial cables are compatible?
Use standard Cisco-style RJ45 rollover cables for RJ45 serial ports, or DB9 null-modem cables for DB9 ports. Refer to the manual for pinouts.
How do I monitor temperature and fan status?
In the web GUI, navigate to 'System' > 'Health' to view temperature, fan speed, and voltage sensors. Alerts can be configured via SNMP.
Is the IM7200 rackmountable?
Yes, it is a 1U rackmount unit. Use the included rack ear brackets and screws to mount in a standard 19-inch rack.
How do I enable out-of-band management?
Connect the dedicated management port (usually eth0) to your network and assign a static IP. Use the web GUI to configure out-of-band settings under 'Setup' > 'OOB'.
User questions about IM7200 Opengear
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual IM7200 - Opengear and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IM7200 by Opengear.
USER MANUAL IM7200 Opengear
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Opengear
Model : IM7200
Category : Server