OM2232 - Server Opengear - Free user manual and instructions
Find the device manual for free OM2232 Opengear in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (Console Server) |
| Brand | Opengear |
| Model | OM2232 |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 43.2 x 25.4 x 4.4 cm (17 x 10 x 1.75 in) |
| Weight | 4.5 kg (10 lb) |
| Power Supply | AC 100-240V, 50/60Hz, 1.2A max |
| Power Consumption | 30W typical |
| Processor | ARM Cortex-A9 1.2 GHz dual-core |
| Memory | 512 MB DDR3 |
| Storage | 4 GB eMMC flash |
| Network Interfaces | 2 x Gigabit Ethernet (RJ45) |
| Serial Ports | 32 x RS-232 RJ45 |
| USB Ports | 2 x USB 2.0 Type A |
| Console Management | Secure remote access via SSH, Telnet, web UI |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | UL, CSA, CE, FCC |
| Included Accessories | Power cord, rack mount kit, RJ45 to DB9 adapters (32 pcs), quick start guide |
| Warranty | 2 years limited |
Frequently Asked Questions - OM2232 Opengear
How do I perform the initial setup of the Opengear OM2232?
Connect the server to your network via the Ethernet port, power it on, and wait for it to boot. Use a web browser to access the default IP address (192.168.1.1) or use the console port. Follow the quick start guide to configure network settings and admin credentials.
Can I use the OM2232 to manage devices over the internet?
Yes, the OM2232 supports secure remote management via SSH, VPN, or the web interface. You must configure firewall rules and enable remote access in the settings.
How many serial devices can I connect?
The OM2232 has 32 RS-232 serial ports (RJ45 connectors). You can connect up to 32 serial devices, such as routers, switches, or servers.
What power supply does the OM2232 require?
It requires an AC 100-240V, 50/60Hz power source. The power consumption is typically 30W. A standard IEC power cord is included.
How do I reset the OM2232 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds using a paperclip. The device will reboot and restore factory settings. Note: This erases all configurations.
Is the OM2232 compatible with Windows, Linux, and Mac?
Yes, the OM2232 is platform-independent. You can manage it via web browser (any OS) or through SSH/Telnet clients. Serial console access works with any terminal emulator.
What should I do if the OM2232 is not powering on?
Check the power cord connection and ensure the power outlet is working. If using a redundant power supply, verify both inputs. If the issue persists, try a factory reset or contact Opengear support.
Can I mount the OM2232 in a server rack?
Yes, the OM2232 is a 1U rackmount device. It comes with a rack mount kit. Install the included brackets and slide it into a standard 19-inch rack.
How do I update the firmware on the OM2232?
Download the latest firmware from the Opengear support website. Access the web interface, go to Administration > Firmware Upgrade, upload the file, and follow the prompts. Do not power off during the update.
What maintenance does the OM2232 require?
Periodically clean the ventilation grills with compressed air to prevent overheating. Check for firmware updates quarterly. Ensure redundant power supplies are operational. The device has no user-serviceable parts inside.
User questions about OM2232 Opengear
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual OM2232 - Opengear and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OM2232 by Opengear.
USER MANUAL OM2232 Opengear
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Opengear
Model : OM2232
Category : Server