ESF 65710X - Dishwasher ELECTROLUX - Free user manual and instructions
Find the device manual for free ESF 65710X ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Model | ESF 65710X |
| Brand | Electrolux |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Net weight | 45 kg |
| Power supply | 220-240 V, 10 A, 50 Hz |
| Capacity | 12 standard place settings |
| Water consumption per cycle | 10 L |
| Energy consumption per cycle | 1.05 kWh |
| Energy class | A+ |
| Noise level | 44 dB(A) re 1 pW |
| Wash programs | Eco, Intensive, Quick, Glass, Pre-wash |
| Options | Delayed start, Extra drying, Multitab |
| Drying system | Condensation with fan |
| Cutlery tray type | 3rd tray |
| Child safety | Yes (button lock) |
| Water leak protection | AquaStop |
| Salt indicator | Yes |
| Rinse aid indicator | Yes |
| Filter | Self-cleaning stainless steel |
| Wash arms | 3 adjustable arms |
| Tub material | Stainless steel |
| Repairability | Spare parts available for 10 years |
| Recommended cleaning | Specific maintenance product every 30 cycles |
Frequently Asked Questions - ESF 65710X ELECTROLUX
How to clean the filter of my Electrolux ESF 65710X dishwasher?
Remove the lower basket, unscrew the filter by turning counterclockwise, clean it under running water with a brush, then reassemble. It is recommended to do this every month.
Why do my glasses come out dull?
This may be due to a lack of rinse aid or too high water hardness. Check the rinse aid level and adjust the softener salt dosage according to your water hardness.
What to do if the dishwasher does not start?
First check that the appliance is properly plugged in and the door is closed. Make sure the program is not in delayed start mode. If necessary, reset the appliance by unplugging it for 1 minute.
What program to use for very dirty dishes?
Use the Intensive program which heats water to a high temperature (65-70°C) and extends the cycle for deep cleaning. Add a suitable detergent.
How to add regeneration salt in the Electrolux ESF 65710X?
Locate the salt reservoir at the bottom of the appliance (under the lower basket). Open the cap, add water (if necessary), then add salt up to the brim. Close carefully.
The dishwasher displays error code E21, what should I do?
Error code E21 indicates a drainage problem. Check that the drain hose is not kinked or blocked. Clean the internal filter and wash arm. If the error persists, contact customer service.
Can I use all-in-one tablets (multitab)?
Yes, the Multitab option is available. Activate it to optimize dosing. Note that with this option, salt and rinse aid may still be necessary depending on water hardness.
How to set the delayed start?
On the control panel, press the 'Delayed start' button until the desired time (1h to 24h). Close the door and the program will start at the scheduled time.
Why is there standing water in the bottom after a cycle?
This may be normal if the cycle includes a stop rinse phase. Otherwise, check the filter and drain pump for blockages. If the problem persists, a pressure switch defect is possible.
What are the recommended weekly maintenance tasks?
Clean the door seal with a damp cloth, check and clean the filter, inspect the wash arms for blockages, and run an empty cycle with a specific maintenance product every 30 cycles.
User questions about ESF 65710X ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual ESF 65710X - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ESF 65710X by ELECTROLUX.
USER MANUAL ESF 65710X ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : ESF 65710X
Category : Dishwasher