LI23030 - Basket SIEMENS - Free user manual and instructions
Find the device manual for free LI23030 SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Siemens |
| Model | LI23030 |
| Width | 60 cm |
| Depth | 50 cm |
| Height (without flue) | 15 cm |
| Net weight | 12 kg |
| Power supply | 220-240 V, 50 Hz |
| Maximum power consumption | 250 W |
| Lighting type | LED (2 x 3 W) |
| Number of speeds | 3 speeds + intensive |
| Maximum airflow | 650 m³/h |
| Maximum noise level | 65 dB(A) |
| Operation mode | Extraction or recirculation |
| Control type | Push buttons |
| Filter type | Washable metal grease filter |
| Filter maintenance | Wash in dishwasher or by hand every 2 months |
| Exterior cleaning | Soft cloth and mild detergent |
| Safety | Automatic shut-off after 24 h |
| Spare parts available | Filters, bulbs, controls |
| Energy class | A+ |
Frequently Asked Questions - LI23030 SIEMENS
How to install the Siemens LI23030 range hood?
Installation must be carried out by a qualified professional. Ensure the hood is firmly fixed to the wall and the exhaust duct is properly connected. Refer to the manual for the mounting diagram.
What is the recommended mounting height above a cooking surface?
It is recommended to mount the hood at a height of 65 to 75 cm above an electric cooktop and 75 to 85 cm above a gas cooktop.
How to clean the grease filters?
The metal grease filters are dishwasher-safe or can be washed by hand with a mild detergent. It is advisable to clean them every 2 months to maintain performance.
Can the hood be used in recirculation mode?
Yes, the hood can operate in recirculation mode by installing a charcoal filter (sold separately). This filters the air and recirculates it back into the room.
What to do if the hood does not turn on?
First check the power supply and circuit breaker. If the problem persists, inspect the power cord and connections. Contact customer service if necessary.
How to replace the LED bulb?
Unplug the hood, remove the lighting cover, and replace the defective LED bulb with one of the same type (3 W max). Avoid touching the bulb with your fingers.
The hood is noisy, is this normal?
Some noise is normal, especially at high speed. If it becomes excessive, check that the filters are clean and nothing is blocking the duct. Abnormal noise may indicate a motor issue.
How to set the automatic shut-off timer?
Some models have an automatic shut-off function. Refer to the manual for activation instructions. Typically, you need to press and hold the stop button for several seconds.
What is the warranty on the Siemens LI23030 hood?
The standard warranty is 2 years for parts and labor. Register your product on the Siemens website to benefit from the warranty.
Where can I buy spare parts?
Spare parts such as filters and bulbs are available from authorized Siemens dealers or online on the official website. Use the reference LI23030 to find the correct parts.
User questions about LI23030 SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual LI23030 - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LI23030 by SIEMENS.