LC67BA520 - Range hood SIEMENS - Free user manual and instructions
Find the device manual for free LC67BA520 SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Siemens |
| Model | LC67BA520 |
| Finish | Brushed stainless steel |
| Width | 60 cm |
| Height (min-max) | 86 - 120 cm |
| Depth | 50 cm |
| Weight | 17 kg |
| Maximum Airflow | 520 m³/h |
| Number of Speeds | 4 + intensive |
| Controls | Electronic push buttons with LED display |
| Lighting | 2 x 2 W LED |
| Grease Filter | Stainless steel, washable in dishwasher |
| Max Noise Level | 64 dB (lowest: 43 dB) |
| Energy Efficiency Class | B |
| Rated Power | 280 W |
| Voltage | 220 - 240 V |
| Exhaust Pipe Diameter | 150 mm |
| Operating Modes | Exhaust air and recirculation |
| Optional Carbon Filter | Yes |
| Chimney Extension | Included |
| Installation | Wall-mounted, manual included |
| Warranty | 2 years |
Frequently Asked Questions - LC67BA520 SIEMENS
How do I clean the stainless steel grease filter?
Remove the filter by pressing the release latch and pulling it downwards. Wash it in the dishwasher or by hand with warm soapy water. Dry it completely before reinstalling. Do it every 2-3 months to maintain extraction efficiency.
How often should I replace the activated carbon filter?
If your hood is in recirculation mode, replace the carbon filter every 3-6 months depending on use. The filter cannot be washed and is located above the grease filter. Check your model's manual for compatibility.
What are the correct mounting dimensions?
The hood is designed for a 60 cm wall-mount installation. The height should be between 86 and 120 cm, with the chimney extension adjustable. For optimal capture, keep the distance between the hob and the hood at 65 cm for gas and 55 cm for electric cooktops.
Why does my hood not turn on?
Check the power supply and whether the plug is connected. Confirm the fuse hasn't tripped. Also, ensure the hood is not in standby mode. If the LED control board shows no light, contact Siemens service.
How do I change the LED lamps?
LEDs are integrated and should be replaced by authorized service technicians. Do not attempt to open the lighting unit yourself, as it contains high-voltage components.
Can this hood be used as a ductless (recirculating) model?
Yes, it can be used in recirculation mode. You will need to install the activated carbon filter (not included) and remove the exhaust hose. The air is cleaned and returned to the kitchen.
What is the maximum airflow and noise level?
The maximum airflow is 520 m³/h. At the lowest speed, the noise level is about 43 dB, increasing to 64 dB at intensive speed. Use the intensive mode only for short periods.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the metal filter reset button for about 3 seconds until the indicator light turns off. Refer to the manual for the exact procedure on your model.
What accessories are included?
The hood comes with a stainless steel chimney, a grease filter, an exhaust pipe (1.5 m), and mounting kit. The carbon filter and remote control are available as options.
Is the hood energy efficient?
This hood is classified as energy efficiency class A for fluid dynamic efficiency. It uses efficient LED lights and a high-performance motor, helping to reduce running costs.
User questions about LC67BA520 SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual LC67BA520 - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC67BA520 by SIEMENS.
USER MANUAL LC67BA520 SIEMENS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SIEMENS
Model : LC67BA520
Category : Range hood