Expressionist Ultra MX6021E - Loudspeaker ALTEC LANSING - Free user manual and instructions

Product Type	2.1 speaker system (subwoofer + two satellites)
Brand	Altec Lansing
Model	Expressionist Ultra MX6021E
Total Power	200 W RMS
Subwoofer Power	100 W
Satellite Power	50 W each
Frequency Response	35 Hz - 20 kHz
Signal-to-Noise Ratio	> 80 dB
Audio Inputs	3.5 mm stereo jack, RCA input
Control	Wired remote control with volume button and headphone jack
Power Supply	Mains: 100-240 V, 50/60 Hz
Subwoofer Dimensions	30 x 30 x 36 cm
Each Satellite Dimensions	10 x 15 x 12 cm
Total Weight	Approximately 10 kg
Color	Black
Main Features	Built-in amplification, wired remote control, headphone jack, short-circuit protection
Care and Cleaning	Unplug before cleaning; use a soft dry cloth; avoid chemicals
Safety	Do not expose to moisture; do not open the enclosure; keep away from children
Spare Parts and Repairability	Contact Altec Lansing customer service for spare parts; repair by a professional

Frequently Asked Questions - Expressionist Ultra MX6021E ALTEC LANSING

How to connect my Altec Lansing Expressionist Ultra MX6021E to a computer?

Use a 3.5 mm stereo audio cable to connect your computer's headphone output to the AUX input on the subwoofer or the wired remote control.

What to do if the sound is low or non-existent?

Check that the cable is properly connected, that the volume is not at minimum on the device and the source. Make sure the power is on.

Can I use this system with a television?

Yes, if your TV has a stereo audio output (headphone jack or RCA). Use an adapter if necessary.

How to clean the speakers?

Unplug the device. Use a soft, dry cloth to dust the grilles and enclosure. Do not use liquids or aerosols.

The wired remote control does not work, what to do?

Check the remote control connection to the subwoofer. If the problem persists, contact customer service for a replacement.

What is the power of this system?

The total power is 200 W RMS, split into 100 W for the subwoofer and 50 W for each satellite.

Can I replace the power cable?

Yes, use a standard power cable with the appropriate connector. Make sure it supports the mains voltage.

Is there an automatic standby function?

No, this model does not have automatic standby. Remember to turn off the device using the switch when not in use.

The subwoofer produces a humming sound, what to do?

Move the subwoofer away from sources of electromagnetic interference such as WiFi routers or power cables. Also check the grounding of your outlet.

Where can I find the user manual?

The manual is available in PDF format on the notice-facile.com website. You can download it for free by selecting your language.

USER MANUAL Expressionist Ultra MX6021E ALTEC LANSING

Safety Instructions & Warranty

Congratulations on purchasing your new Altec Lansing product. Please refer to this document for important product safety information prior to installation or use of the product.

User Instructions

At Altec Lansing, we are doing all we can to minimize our impact on the environment. We are manufacturing energy-efficient products, recycling whenever possible, and minimizing the paper and plastic we use in our packaging and promotional materials.

In order to reduce paper consumption, our Quick Connect instructions are printed on the flaps of the box rather than on a separate sheet of paper.

For more detailed installation and operation instructions, please consult our online User Guide at www.alteclansing.com/info.

We hope that your installation is smooth and easy, and that you enjoy your new Altec Lansing sound system.

Getting Assistance

If you cannot find the answer to your setup and performance questions in this package, you can also consult the FAQs in the customer support section of our Web site at www.alteclansing.com. If you live in North America and still can't find the information you need, please call our customer service team for assistance before returning the product to your retailer under their return policy.

Tel: [phone] (Toll Free in US and Canada) Email: [e-mail]

If you live outside of North America, please visit our website at www.alteclansing.com and select your region to locate your country's distributor.

International Distribution

International customers: For information regarding the distribution of Altec Lansing products in your country, please visit www.alteclansing.com and click on your region.

Registering Your Product

Visit www.alteclansing.com to register your product online, so we can provide you with the best possible service and technical support.

FCC Compliance

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Safety Information

The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions

2. Keep these instructions.

3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times.
16. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Please read FCC information and important safety logos at the bottom of the unit.

(iMT620, iMT702)

WARNING There is a danger of explosion if the battery is incorrectly replaced. Replace it only with the same or equivalent type. Do not expose it to excessive heat such as sunshine, fire, etc.

BATTERY DISPOSAL The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions.

(iMT620)

Rated Voltage: 3.7V Capacity: 1800mAh Type: McR18650

Warranty

ALTEC LANSING ONE-YEAR LIMITED WARRANTY (TWO-YEAR LIMITED WARRANTY IN THE EUROPEAN UNION)

What Does the Warranty Cover?

Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the exceptions stated below.

What Is the Period of Coverage?

For units purchased in European Union, this warranty runs for two years from the date of purchase. For units not purchased in Europe, this warranty runs for one year from the date of purchase. The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

What Does the Warranty Not Cover?

This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

What Will Altec Lansing Do to Correct the Problem?

Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product.

How to Get Warranty Service

To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email ([e-mail]). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 – please be prepared to provide the same information. If the problem appears to be related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and instructions for return shipment. Return shipments shall be at the customer's expense, and the return must be accompanied by the original proof of purchase. You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please note that in the European Union, you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing's goods. Those rights are not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and to the extent, valid and enforceable under the applicable law.

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC Equipment

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

Bienvenue

ASIA/PACIFIC 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008

©2009 Plantronics, Inc. All rights reserved.

ALTEC, ALTEC LANSING and the Altec Lansing logo are trademarks or registered trademarks of Altec Lansing, a division of Plantronics, Inc.

Plantronics and the logo design are trademarks or registered trademarks of Plantronics, Inc.

All other trademarks appearing herein are the property of their respective owners.

Designed by Altec Lansing in the USA. Made in China. A13647-1 R01