KARCHER K 2.490 T150 - Pressure washer

K 2.490 T150 - Pressure washer KARCHER - Free user manual and instructions

Find the device manual for free K 2.490 T150 KARCHER in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product typeHigh-pressure cleaner
BrandKärcher
ModelK 2.490 T150
Maximum pressure110 bar
Water flow rate400 l/h
Power consumption1400 W
Power supply230 V / 50 Hz
Weight4.5 kg
Dimensions (L × l × h)27.5 × 32.5 × 89.5 cm
High-pressure hose length6 m
Motor typeWater-cooled
Noise level75 dB(A)
Main featuresCleaning of exterior surfaces, vehicles, terraces
SafetyAutomatic shut-off, overload protection
Included accessoriesHigh-pressure gun, lance, rotary nozzle, adapter for water supply connection
Recommended maintenanceClean the filter before each use
RepairabilitySpare parts available online
Warranty2 years

Frequently Asked Questions - K 2.490 T150 KARCHER

How to start the K 2.490 T150?
Plug the device into a 230 V outlet, open the water tap, then press the trigger after bleeding the air. The device starts automatically.
What type of detergent to use?
Use a special high-pressure cleaner non-foaming detergent. Never use flammable or corrosive products.
How to clean the filter?
Unscrew the water inlet connection, remove the filter and rinse it with clean water. Put it back before use.
What to do if the pressure is low?
Check that the water inlet filter is not clogged, the hose is not kinked, and the water pressure from the supply is sufficient (min. 1 bar).
How to store the device?
Empty the remaining water, coil the hose without twisting, store the device in a dry place protected from frost (temperature > 0°C).
Can I use hot water?
No, the device is designed for cold water only (max. 40°C). Hot water would damage the pump.
How to descale the device?
Use a descaler for high-pressure cleaners. Fill the tank with product, run the device for a few minutes, then rinse thoroughly.
Where to find spare parts?
Spare parts are available on the official Kärcher website or from authorized retailers. Use the model number K 2.490 T150.
How to bleed the air from the system?
Before first use or after a long period of inactivity, press the trigger without a nozzle to let the air escape until a steady stream is achieved.
What safety precautions to follow?
Never direct the spray at people or animals, wear safety goggles, and unplug the device before any intervention.

User questions about K 2.490 T150 KARCHER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pressure washer in PDF format for free! Find your manual K 2.490 T150 - KARCHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K 2.490 T150 by KARCHER.

USER MANUAL K 2.490 T150 KARCHER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KARCHER

Model : K 2.490 T150

Category : Pressure washer