Gembird SPK502 - Speaker

SPK502 - Speaker Gembird - Free user manual and instructions

Find the device manual for free SPK502 Gembird in PDF.

📄 9 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Gembird SPK502 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Gembird
Model SPK502
Product Type Wired Speaker
Speaker Type 2.0 Stereo
Power Output 3W RMS (1.5W per channel)
Frequency Response 100 Hz - 20 kHz
Impedance 4 Ohms
Driver Size 2.5 inches
Input 3.5mm Audio Jack
Power Supply USB 5V (via USB-A cable)
Dimensions (L x W x H) 90 x 90 x 150 mm
Weight 400 g
Material Plastic enclosure
Controls Volume knob on front
LED Indicator Blue power LED
Cable Length 1.2 m
Compatibility PC, laptop, smartphone, tablet
Cleaning Wipe with dry cloth; avoid liquids
Safety Keep away from water and heat sources
Included Accessories USB power cable, 3.5mm audio cable, user manual

Frequently Asked Questions - SPK502 Gembird

How do I connect the SPK502 speaker to my computer?
Plug the 3.5mm audio cable into your computer's headphone or speaker jack. Then connect the USB cable to a powered USB port for power. The speaker should automatically turn on and produce sound.
Why is there no sound coming from the speaker?
Check that the volume knob is turned up and the audio cable is fully inserted. Ensure your device's audio output is enabled and not muted. Also, verify the USB cable is providing power (blue LED should be on).
Can I use this speaker with a smartphone?
Yes, the SPK502 works with any device that has a 3.5mm headphone jack. For power, you can use a USB power bank or a wall adapter (not included).
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use water, cleaning solvents, or abrasive materials. Avoid getting moisture near the ports.
What is the power output of the Gembird SPK502?
The speaker has a total power output of 3W RMS (1.5W per channel). It is suitable for near-field listening.
Is the speaker compatible with Bluetooth?
No, the SPK502 is a wired speaker only. It requires a physical 3.5mm audio connection.
What should I do if the speaker produces distorted sound?
Reduce the volume level on both the speaker and your audio source. Distortion can occur if the input signal is too high. Also, check that the audio cable is not damaged.
Can I replace the audio cable if it breaks?
The audio cable is detachable on most units. Use any standard 3.5mm male-to-male cable as a replacement. The USB cable is also replaceable.
Does the speaker have a microphone?
No, the Gembird SPK502 is a passive speaker without a built-in microphone. It only plays audio.
How can I obtain a replacement manual or support?
Visit the Gembird official website or contact their customer support. Manuals can also be found on manual-lib.com or similar sites.

User questions about SPK502 Gembird

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual SPK502 - Gembird and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPK502 by Gembird.

USER MANUAL SPK502 Gembird

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Gembird

Model : SPK502

Category : Speaker