2000 series AC2885 - Air purifier PHILIPS - Free user manual and instructions

Product Type	Air Purifier
Brand	Philips
Model	2000 series AC2885
Dimensions (L × W × H)	35.5 × 21.5 × 61.6 cm
Weight	8.5 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	55 W max
Recommended Room Size	Up to 55 m²
CADR (Particles)	350 m³/h
CADR (Formaldehyde)	200 m³/h
Filtration Technology	NanoProtect HEPA + Activated Carbon
Sensor	AeraSense (PM2.5)
Operating Modes	Auto, Sleep, Turbo, Manual
Noise Level	20 - 65 dB(A)
Display	Air Quality Indicators (colors)
Maintenance & Cleaning	Clean pre-filter every month; replace combined filter every 2 years
Safety	Automatic shut-off when tipped over
Spare Parts & Repairability	Filter FY0194 / FY0195; available online
General Information	2-year warranty; certified by AFSSET

Frequently Asked Questions - 2000 series AC2885 PHILIPS

How do I replace the filter of the Philips AC2885 air purifier?

Turn off and unplug the device. Open the front panel, remove the old combined filter (type FY0194/FY0195), insert the new one following the arrow direction, then close the panel. Reset the filter life indicator by holding the reset button for 3 seconds.

How often should I clean the pre-filter?

It is recommended to clean the pre-filter every month or more often with heavy use. Use a vacuum or rinse with lukewarm water, then dry completely before reinstalling.

What is the lifespan of the combined filter?

The combined HEPA + activated carbon filter has a lifespan of approximately 2 years under normal use (8 hours per day). The device will alert you when replacement is needed.

Why does the air quality indicator stay red?

A red light indicates high concentration of fine particles. Ensure doors and windows are closed, the filter is not clogged, and the device is in auto mode. If the problem persists after a few hours, check the filter status.

Can I use the purifier in a humid room like a bathroom?

Not recommended. The device is not designed for excessive humidity (>85% RH). Place it in a dry area away from splashes.

How do I reset the filter replacement indicator?

After installing a new filter, plug in and turn on the device. Press and hold the reset button (usually marked with a filter symbol) for 3 seconds until the indicator turns off.

The purifier is louder than usual, what should I do?

Check that the filter is correctly installed and not clogged. Clean the pre-filter. If the noise persists, contact customer service, as this may indicate a fan defect.

What is the power consumption in sleep mode?

In sleep mode, power consumption is below 1 W. However, it is recommended to turn off the device completely when not in use for long periods.

Can I use the device 24/7?

Yes, the purifier is designed for continuous use. Auto mode adjusts speed based on air quality, optimizing consumption and noise level.

Where can I buy a replacement filter?

Replacement filters (references FY0194/HFY0195) are available on the official Philips website, in appliance stores, and at authorized dealers. Verify compatibility with your AC2885 model.

USER MANUAL 2000 series AC2885 PHILIPS

© 2015 Kornit Ice Phillips N.V.

all rights reserved for actions (devors)

424121090256

EN User manual

FR Mode d'emploi 22

1

2

Contents

1 IMPORTANT SAFEGUARDS 2

2 Your air purifier 8

Product overview (fig.①) 8

Controls overview (fig.②) 8

3 Getting started 9

Installing the filters 9

Wi-Fi setup for AC2889 10

4 Using the air purifier 11

Understanding the air quality light 11

Turning on and off 11

Changing the Auto mode setting 11

Changing the fan speed 12

Setting the timer 12

Using the light on/off function 13

Switching the display mode 13

5 Cleaning 13

Cleaning the body of the air

purifier 13

Cleaning the air quality sensor 13

Cleaning the pre-filter 14

6 Replacing the filters 15

Filter replacement indicator 15

Replacing the filters 15

Filter reset 16

7 Storage 16

8 Troubleshooting 17

9 Warranty 20

10 Accessories 21

11 Disposal 21

Environmental friendly paper used. Thanks for your contribution to save trees.

1 IMPORTANT SAFEGUARDS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before operating the air purifier.
• Do not expose the air purifier to rain, or use near water, in a bathroom, laundry area or other damp location.
• Do not use the air purifier where combustible gases or vapors are present.

• Do not block the air inlet and outlet by placing items on the air outlet or in front of the air inlet. Do not insert fingers or foreign objects into the air outlet or air inlet.

• Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.

• Do not clean the appliance with water, any other liquid, or a (flammable) detergent to avoid electric shock and/or a fire hazard.
• Do not spray any flammable materials such as insecticides or fragrance around the appliance.
• Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance to the electrical outlet.
  • Always switch the air purifier OFF and unplug from the electrical outlet after using and before cleaning, moving and changing the filters. Be sure to remove the plug from the outlet. Never handle the power plug with wet or damp hands.

- Only use the power cord supplied with the air purifier.

- Keep the cord out of heavy traffic areas and arrange cord so that it will not be tripped over.

- Do not put the cord under carpets or throw rugs or near heat vents and open flames.

- Locate the air purifier near an electrical outlet and avoid using an extension cord.

- Do not use the plug in or near a power outlet that contains an electric air freshener to prevent damage to the plug.

- Do not use the air purifier outdoors. For indoor use only.

- If an extension cord must be used, exercise care.

- The marked electrical rating of the cord must be as great as the rating of the air purifier.

- Do not operate any air purifier with a damaged cord or plug. Discard air purifier or call 1-866-309-8817 for assistance.

- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

- The cord should be arranged so that it will not drape over the edge of a counter or table where it could be pulled by children or tripped over unintentionally.

- Do not operate this appliance if it has a damaged power cord, plug or motor, if it is not working properly or after the appliance malfunctions or has been damaged in any manner. For assistance call 1-866-309-8817.

- Close supervision is necessary when the appliance is used by, on, or near children or invalids.

- This appliance is not a toy. Children should be supervised to ensure they do not play with the air purifier.

WARNING: To reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed control device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Caution

• This appliance is not a substitute for proper ventilation, regular cleaning, or use of an exhaust fan or hood while cooking.
• A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
• Never use the air purifier unless it is fully assembled and with filters in place.
  • The air purifier must be used in its upright position.

- Make sure the air purifier is assembled/connected properly after cleaning the air quality sensor and pre-filter or replacing the filters.

- If the air purifier will not be used for a long period of time, unplug from the electrical outlet, clean the appliance, air quality sensor and pre-filter (see 'Cleaning') before storing.

• Make sure that you plug the appliance into a properly connected electrical outlet.

• Always place and use the appliance on a dry, stable, level, and horizontal surface. Make sure the air purifier cannot be easily knocked over by a person or object.

- Leave at least 20cm/8in free space behind and on both sides of the appliance and leave at least 30cm/12in free space above the appliance.

- Do not place anything on top of the appliance.

- Do not sit, stand or place heavy objects on the air purifier.

- Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.

• Make sure all filters are properly installed before you switch on the appliance.

- Only use the original Philips filters specially intended for this appliance. Do not use any other filters.

- Do not use the filter as fuel or for similar purposes.

- Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.

• Always lift or move the appliance by the handle on back side of the appliance.

- NEVER tilt, move or attempt to change or replace a filter while the air purifier is operating. Switch OFF and unplug

from the electrical outlet. Do not move the air purifier by pulling on the power cord.

• Do not use this appliance when using indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.
• Do not use the appliance near gas appliances, heating devices or fireplaces.
• Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.
• To prevent interference, place the appliance at least 2 meters/6 1/2 feet away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks.
• Use this air purifier for its intended household use as described in this manual. Do not use attachments not recommended by Philips

Electronics North America Corporation.

• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

• Always wash your hands thoroughly after changing or cleaning a filter.
- Unplug the appliance to override smart enabled or remote functions.

SAVE THESE INSTRUCTIONS

- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

2 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Product overview (fig.①)

A Air outlet
B Control panel
C Air quality light
D Air quality sensors

E NanoProtect True HEPA filter (FY2422)

F NanoProtect Active Carbon filter (FY2420)

G Pre-filter

H H1, H2 and H3 air inlets

I Front panel

Controls overview (fig.②)

J On/Off button
K Light dimming button
L Auto mode button
M Display screen
N General mode icon
O Allergen mode icon
P Bacteria & Virus mode icon

For non-connected version:

Indoor Allergen Index indicator

Q For connected version: Wi-Fi indicator

R Fan speed button
S Timer button
T Reset button

3 Getting started

Installing the filters

Note

• Make sure the air purifier is unplugged from the electrical outlet before installing the filters.
• Make sure the side of the filter with the tag is pointing towards you.

1 Pull the bottom part of the front panel to remove it from the air purifier (fig.③).
2 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.④).
3 Remove all filters (fig.⑤).
4 Remove all packaging materials from the filters (fig.6).
5 Place the thick HEPA filter (FY2422) into the air purifier and then the thin AC (activated carbon) filter (FY2420) (fig.⑦). The model numbers are shown on each filter.
6 Attach the pre-filter back into the air purifier (fig.⑧).

Note

- Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier.

7 Reattach the front panel by pressing the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.⑨).
8 Wash your hands thoroughly after installing filters.

Wi-Fi setup for AC2889

Setting up the Wi-Fi connection for the first time

1 Download and install the 'Air Matters' App developed by FreshIdeas Studio from the App Store or Google Play.

2 Put the plug of the air purifier in the wall outlet and touch ⏻ to turn on the air purifier.

→The Wi-Fi indicator is not displayed on the screen when using the air purifier for the first time.

3 Touch and simultaneously for 3 seconds until you hear a beep.

→The air purifier goes to pairing mode.

→The Wi-Fi indicator links orange.

4 Make sure that your mobile device is successfully connected to your Wi-Fi network.

5 Launch the 'Air Matters' App and follow the onscreen instructions to connect the air purifier to your network.

6 After the successful pairing and connection, the Wi-Fi indicator will light up white. If pairing is not successful, consult the troubleshooting section, or the help section in the 'Air Matters' App for extensive and up-to-date troubleshooting tips.

Note

- This instruction is only valid when the air purifier is being set up for the first time. If the network has changed or the setup needs to be performed again, consult section "Setting up the Wi-Fi connection when the network has changed" on page 10.

- You cannot set up two air purifiers at the same time. If you want to set up more than one air purifier, you can only do it successively.

- Make sure that the distance between your mobile device and the air purifier is less than 33 ft/10 m without any obstructions.

- This App supports Android 4.4 version and above or iOS 9.0 version and above.

Setting up the Wi-Fi connection when the network has changed

Note

• This applies when your default network connected with your air purifier has changed.

1 Put the plug of the air purifier in the wall outlet and touch ⏻ to turn on the air purifier.

→The Wi-Fi indicator®blinks white.

2 Touch and simultaneously for 3 seconds until you hear a beep.

→The air purifier goes to pairing mode.

→The Wi-Fi indicator®blinks orange.

3 Enter your Wi-Fi network name and password in the App on your mobile device. The network name and password are case-sensitive.

4 Follow the steps 5-6 in "Setting up the Wi-Fi connection for the first time" section.

4 Using the air purifier

Understanding the air quality light

Indoor Allergen Index (IAI) is a real-time numerical display that provides visual and immediate feedback on indoor allergen level.

IAI Air quality	light color	Air quality level
1-3 Blue		Good
4-6 Blue-	violet	Fair
7-9 Red-	purple	Poor
10-12 Red		Very poor

The air quality light automatically goes on when the air purifier is switched on, and lights up all colors in sequence. After approximately 30 seconds, the air quality sensors select the color that corresponds to the surrounding air quality of airborne particles.

Turning on and off

Note

• Always place the air purifier on a stable, horizontal, and level surface with the front of the unit facing away from walls or furniture.
- For optimum purification performance, close doors and windows.
- Keep curtains away from the air inlet or air outlet.

1 Put the plug of the air purifier in the wall outlet.
2 Touch (to switch on the air purifier (fig.10)).

→The air purifier beeps.

→The air purifier operates under the allergen mode by default.

When the air purifier is warming up, "displays on the screen. After measuring the particulate matter only in the air, the air purifier shows the IAI level and operates in the auto mode with displayed on the screen (fig.11).

→After measuring the air quality for approximately 30 seconds, the air quality sensor automatically selects the appropriate air quality light color.

3 Touch and hold ⏻ for 3 seconds to switch off the air purifier.

Note

- If the air purifier stays connected to the electrical outlet after turning OFF, the air purifier will operate under the previous settings when turned ON again.

Changing the Auto mode setting

You can choose the Allergen mode ( ), the General mode ( ) or the Bacteria & Virus mode ( ).

Allergen mode

The extra-sensitive allergen mode is designed to react to even a small change in allergen levels in the surrounding air.

• Touch the Auto mode button to select the Allergen mode (fig.⑫).
  → Auto (A) and 🙏 display on the screen.

General mode

A smart auto-setting that automatically adjusts the air purifier's settings to the ideal level.

• Touch the Auto mode button to select the General mode (fig.13).
  → Auto (A) and 🔒 display on the screen.

Bacteria & Virus mode

The bacteria & virus mode boosts the airflow to quickly reduce bacteria & viruses.

• Touch the Auto mode button select the Bacteria & Virus mode (fig.14).
  → Auto (A) and ⚙ display on the screen.

Changing the fan speed

In addition to the Auto modes, there are several fan speeds available.

When using the manual fan speed settings, the purifier will still monitor the air quality, but it will not automatically adjust the fan speed if it detects changes in the air quality.

Sleep (SL)

In sleep mode, the air purifier operates quietly on a very low speed.

• Touch the fan speed button to select the sleep mode (SL) (fig.15).

Note

• All lights will go off in sleep mode.
• You can turn on the lights manually by touching the light dimming button 🖱️

Manual

• Touch the fan speed button repeatedly to select the fan speed you need (fig.16).

Turbo (t)

In turbo mode, the air purifier operates on the highest speed.

• Touch the fan speed button ⑧ select the turbo mode (t) (fig.⑰).

Setting the timer

With the timer, you can have the air purifier operate for a set number of hours. When the set time has elapsed, the air purifier will automatically switch off.

• Touch the timer button repeatedly to choose the number of hours you want the air purifier to operate (fig.18).
  →The timer is available from 1 to 12 hours.

To deactivate the timer, touch the timer button repeatedly until "---" displays on the screen.

Note

- If you set the timer once, next time you use the timer, it starts from the previous setting time.

Using the light on/off function

With the light dimming button, you can switch on or off the air quality light, the display screen and the function indicator if desired.

1 Touch the light dimming button once, the air quality light will be dimmed.
2 Touch the light dimming button 🎨 again, the air quality light will go off.
3 Touch the light dimming button 🎨 for the third time, all lights will be on again.

Switching the display mode

Note

• This function is only applicable for AC2889.

The air purifier has dual display mode, IAI display and PM2.5 display.

1 Touch the light dimming button 🎨 for 3 seconds to switch to PM2.5 display mode (Fig.19).

486inks twice.

→The actual PM2.5 level displays on the screen.

2 Touch the light dimming button 🎨 for 3 seconds again to switch back to IAI display mode (Fig.⑳).

481 links twice.

→The IAI level displays on the screen.

5 Cleaning

Note

• Always turn the air purifier off and unplug from the electrical outlet before cleaning.
- Never immerse the air purifier in water or any other liquid.
- Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the air purifier.
- Only the pre-filter is washable. The HEPA and AC air filters are not washable.
- Do not attempt to clean the filters or air quality sensor with a vacuum.

Cleaning the body of the air purifier

Regularly clean the inside and outside of the air purifier to prevent dust from collecting.

1 Use a soft, dry cloth to clean both the interior and exterior of the air purifier.
2 The air outlet can also be cleaned with a dry, soft cloth.

Cleaning the air quality sensor

Clean the air quality sensor every 2 months for optimal functioning of the purifier.

Note

• If the air purifier is used in a dusty environment, it may need to be cleaned more often.
• If the humidity level in the room is very high, condensation may develop on the air quality sensor and the air quality light may indicate a more poor air quality even though the air quality is actually good. If this occurs, clean the air quality sensor or use the air purifier on a manual speed setting.

1 Switch off the air purifier and unplug from the wall outlet.
2 Clean the air quality sensor inlet and outlet with a soft brush (fig.21).
3 Remove the air quality sensor cover (fig.22).
4 Clean the air quality sensor, the dust inlet and the dust outlet with a damp cotton swab (fig.23).
5 Dry all parts thoroughly with a dry cotton swab.
6 Reattach the air quality sensor cover (fig.24).

Cleaning the pre-filter

Clean the pre-filter when F0 is displayed on the screen(fig.25).

1 Switch off the air purifier and unplug from the wall outlet.
2 Pull the bottom part of the front panel to remove it from the air purifier (fig.③).
3 Press the two clips down (1) and pull the pre-filter towards you (2) (fig.④).
4 If the pre-filter is very dirty, use a soft brush to brush away the dust (fig.26). Then wash the pre-filter under running tap water.

5 Allow the pre-filter to air dry thoroughly before placing back in the air purifier.

Note

• To optimize the lifetime of the pre-filter, make sure it air dries completely after cleaning.
• Wash your hands after handling the filter.

6 Put the pre-filter back into the air purifier (fig.⑧).

Note

- Make sure the side with the two clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the air purifier.

7 To reattach the front panel, press the top part of the panel onto the top of the air purifier (1). Then, gently push the panel against the body of the air purifier (2) (fig.⑨).
8 Put the plug of the air purifier in the wall outlet.
9 Touch and hold the reset button ← for 3 seconds to reset the pre-filter cleaning time (fig.27).
10 Wash your hands thoroughly after installing filters.

6 Replacing the filters

Filter replacement indicator

This air purifier is equipped with a filter replacement indicator to make sure that the air purification filter is in optimal condition when the air purifier is operating. When the filters need to be replaced, the filter code displays on the screen (see Filter alert chart).

If the filters are not replaced in 14 days, the air purifier will stop operating and automatically lock to protect the air quality in the room. Replace the filters as soon as possible according to the filter code.

Replacing the filters

Note

• The HEPA and AC air filters are not washable or reusable.
• Always turn off the air purifier and unplug from the electrical outlet before replacing the filters.
- Do not clean the filters with a vacuum.
- If the pre-filter is damaged, worn or broken, do not use. Visit www.philips.com/support or call 1-866-309-8817 for assistance.

Filter alert light status	Action
A3 displays on the screen	Replace the NanoProtect True HEPA filter (FY2422)
C7 displays on the screen	Replace the NanoProtect Active Carbon filter (FY2420)
A3 and C7 display on the screen alternately	Replace both filters

1 Turn off the air purifier and unplug from the wall outlet.
2 Take out the used air filter according to the filter alert light status displayed on the screen (fig.②8). Discard used filters.

Note

- Do not touch the pleated filter surface, or smell the filters as they have collected pollutants from the air.

3 Remove all packaging material from the new filters (fig.6).
4 Place the new filters into the air purifier (fig.⑦).
5 Put the plug of the air purifier in the wall outlet.
6 Touch and hold the reset button ⇔ for 3 seconds to reset the filter lifetime counter (fig.29).

Note

• Wash your hands after changing a filter.
• This air purifier has no other user-serviceable parts. For assistance, call 1-866-309-8817.

Filter reset

You can replace filters even if there is no filter replacement code displayed on the screen. After replacing a filter, you need to reset the filter lifetime counter manually.

1 Touch and simultaneously for 3 seconds to enter the filter reset mode (fig.③0). → Code (A3) of the NanoProtect True HEPA filter displays on the screen.
2 Touch and hold For 3 seconds to force reset the filter lifetime counter of the NanoProtect True HEPA filter (fig.⑲).
3 Code (C7) of the NanoProtect Active Carbon filter displays on the screen after the lifetime counter of the NanoProtect True HEPA filter has been reset (fig.③1).
4 Touch and hold for 3 seconds to force reset the filter lifetime counter of the NanoProtect Active Carbon filter and exit the filter reset mode (fig.③2).

7 Storage

1 Turn off the air purifier and unplug from the wall outlet.
2 Clean the air purifier, air quality sensor and pre-filter (see chapter 'Cleaning').
3 Let all parts air dry thoroughly before storing.
4 Wrap the filters and pre-filter separately in air tight plastic bags.
5 Store the air purifier, filters and prefilter in a cool, dry location.
6 Always thoroughly wash hands after handling filters.

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the air purifier. If you are unable to solve the problem with the information below, visit www.philips.com/support or call 1-866-309-8817 for assistance.

Problem Possible solution

The air purifier does not work even though it is plugged into the wall outlet and switched on.	· The timer is set to a specific time interval. Reset or turn off the timer.· Try a different electrical outlet or check the wall switch.· The filter alert status is displaying the filter code. Replace the corresponding filter and reset the filter lifetime counter (see chapter "Replacing the filters").· If the problem persists, visit www.philips.com/support or call 1-866-309-8817 for assistance.
The air purifier does not work even though it is switched on.	· The filter replacement indicator has been on continuously but you have not replaced the corresponding filter, and the air purifier is now locked. In this case, replace the filter and reset the filter lifetime counter.
The air purifier accidentally powers off.	· The air purifier restarts automatically and goes to the previous mode when the power resumes.
How can I know whether my device is connected version or non-connected version?	· Please check the type plate at the backside of the device, model AC2889 is the connected version while model AC2885 is non-connected version.
The airflow that comes out of the air outlet is significantly weaker than before.	· The pre-filter is dirty. Clean the pre-filter (see chapter "Cleaning").
The air quality does not improve, even though the air purifier has been operating for a long time.	· One of the filters has not been placed in the air purifier or a filter is not placed properly. Make sure that all filters are properly installed in the following order, starting with the innermost filter: 1) NanoProtect True HEPA filter (FY2422); 2) NanoProtect Active Carbon filter (FY2420); 3) pre-filter.· The air quality sensor is wet. Make sure that the air quality sensor is clean and dry (see chapter "Cleaning").
Problem Possible solution
The color of the air quality light always stays the same.	· The air quality sensor is dirty. Clean the air quality sensor (see chapter "Cleaning").
The air purifier produces a unpleasant smell.	· The first few times you use the air purifier, it may produce a plastic smell. This is normal. The air purifier may also produce an unpleasant smell when the filter is dirty. In this case, clean or replace the appropriate filter.· If the air purifier produces a burnt odor, switch OFF and unplug from the electrical outlet. Call 1-866-309-8817 for assistance.
The air purifier is loud.	· If the air purifier is too loud, change the fan speed to a lower fan speed level. When using the air purifier in a bedroom at night, choose the sleep mode.
The air purifier still indicates that I need to replace a filter, but I already did.	· Perhaps you did not reset the filter lifetime counter. Plug in the air purifier, touch 📋 to switch on the air purifier, and touch and hold the reset button 🌐 for 3 seconds (see Filter force reset section).
Error codes "E1", "E2", "E3" or "E4" displays on the screen.	· The air purifier has malfunctions. Visit www.philips.com/support or call 1-866-309-8817 for assistance.

For AC2889 connected version only:

Problem Possible solution
Which App I should download?	·Please download and install the 'Air Matters' App developed by FreshIdeas Studio from the App Store or Google Play.
The Wi-Fi setup is not successful.	·If the router your purifier is connected to is dual - band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5Ghz networks are not supported.·Web authentication networks are not supported.·Check if the purifier is within range of the Wi-Fi router. You can try to locate the air purifier closer to the Wi-Fi router.·Check if the network name is correct. The network name is case-sensitive.·Check if the Wi-Fi password is correct. The password is case-sensitive.·Retry the setup with the instructions in section 'Set up the Wi-Fi connection when the network has changed'.·The Wi-Fi connectivity can be interrupted by electromagnetic or other interferences. Keep the appliance away from other electronic devices that may cause interferences.·Check if the mobile device is in airplane mode. Make sure to have the airplane mode deactivated when connecting to the Wi-Fi network.·Consult the help section in the App for extensive and up-to-date troubleshooting tips.

9 Warranty

FULL TWO-YEAR WARRANTY

Philips Electronics North America Corporation warrants each new Philips product, Models AC2885/AC2889 (excluding filters), against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.*

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

In order to obtain warranty service, simply go to www.philips.com/support or call 1-866-309-8817 for assistance. It is suggested that for your protection, you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty.

NOTE: No other warranty, written or oral, is authorized by Philips Electronics North America Corporation. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.

* Read enclosed instructions carefully.

In US Manufactured for:

Philips Personal Health a division of Philips North America LLC P.O. Box 10313

Stamford, CT 06904

United States of America

In Canada Imported for:

Philips Electronics LTD, 281 Hillmount

Road, Markham, Ontario L6C 2S3

PHILIPS and Philips Shield are registered trademarks of Koninklijke

Philips N.V.

©2018 Philips North America LLC.

All rights reserved.

This symbol on the product's nameplate means it is listed by Underwriters Laboratories, Inc.

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google Inc.

"Air Matters" app developed by FreshIdeas Studio.

The energy efficiency of this ENERGY STAR qualified model is measured based on a ratio between the model's CADR for Dust and the

electrical energy it consumes, or CADR/Watt.

10 Accessories

Philips accessories may be purchased at a store near you, or on our website www.philips.com/store.

11 Disposal

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com

Contenu

1 RECOMMANDATIONS IMPORTANTES 23

1 RECOMMANDATIONS IMPORTANTES

VEUILLEZ LIRE CES INSTRUCTIONS DE SÉCURITÉ AVANT D'UTILISER LE PURIFICATEUR D'AIR ET CONSERVEZ-LES

Véritable filter HEPA NanoProtect (FY2422)

F