SatinShave Prestige BRL180 - Razor PHILIPS - Free user manual and instructions

Product Type	Women's electric shaver
Model	SatinShave Prestige BRL180
Brand	Philips
Dimensions (approx.)	5.6 x 2.4 x 17.5 cm (without cap)
Weight	Approx. 300 g
Power Source	Rechargeable battery (Li-ion)
Battery Type	Built-in rechargeable lithium-ion
Charging Time	8 hours for full charge
Usage Time	Up to 40 minutes cordless
Shaving System	Hypoallergenic foils and cutters
Skin Protection	Protective guard to prevent cuts
Blades	Self-sharpening stainless steel blades
Wet & Dry	Can be used wet with gel or dry
Cleaning Method	Rinse under running water or use cleaning brush
Ergonomic Design	Ergonomic handle for easy grip
Included Accessories	Protective cap, cleaning brush, charging stand
Spare Parts Available	Replacement foil and cutter set (model BRL180/01)
Repairability	Replaceable foils and cutters; battery not user-replaceable
Safety Features	Automatic shut-off after 8 seconds of no skin contact
Certifications	CE, RoHS
Warranty	2 years (subject to terms)

Frequently Asked Questions - SatinShave Prestige BRL180 PHILIPS

How do I charge the Philips SatinShave Prestige BRL180?

Connect the charging stand to a power outlet and place the shaver on the stand. Charge for 8 hours for a full charge. The charging indicator light shows when charging.

Can I use the shaver in the shower?

Yes, the SatinShave Prestige BRL180 is designed for wet and dry use. You can use it with shaving gel or foam in the shower. Rinse it under water afterward.

How do I clean the shaver?

Rinse the shaver head under running water after each use. For deeper cleaning, use the supplied brush to remove hair from the foils and cutters. Do not use abrasive cleaners.

How often should I replace the foils and cutters?

Replace the foil and cutter set every 12 months for optimal performance. If you use the shaver daily, you may need to replace sooner. Use genuine Philips replacement parts.

What is the battery life?

A full charge provides up to 40 minutes of cordless shaving. The battery is a built-in lithium-ion type. It typically lasts several years before needing replacement.

Is the SatinShave Prestige suitable for sensitive skin?

Yes, it features hypoallergenic foils and a protective guard to minimize irritation. It is designed for comfortable shaving even on sensitive skin.

How do I know when the battery is low?

The shaver has a battery indicator light. When the battery is low, the light will flash or the shaver will slow down. Charge immediately.

Can I use the shaver while it is charging?

No, the shaver is designed for cordless use only. Do not use it while connected to the charger. It must be detached from the charging stand.

What does the protective cap do?

The protective cap covers the shaver head to protect the foils during travel or storage. Always use it when not in use to prevent damage.

Where can I find replacement parts?

Genuine replacement foil and cutter sets (model BRL180/01) are available online or from authorized Philips dealers. Always use original parts for best results.

USER MANUAL SatinShave Prestige BRL180 PHILIPS

White Philips electric shaver with black head and power button (no visible text or symbols)

75% recycled paper

75% papier recyclé

2

3

5

6

7

8

9

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that

Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

1 Handle

2 On/off button

3 Battery indicator

4 Release button

5 Socket for small plug

6 Shaving head

7 Trimmer

8 Foils

9 Foil holder release slide

10 Travel cap with lock

11 Skin stretcher cap

12 Small shaving head (BRL180 only)

13 Protection cap for small shaving head (BRL180 only)

14 Bikini trimmer head (BRL180, BRL170 only)

15 Bikini trimmer comb (BRL180, BRL170 only)

16 Cleaning brush

17 Adapter

Not shown: Pouch

Charging

Note: Charge the appliance fully before you use it for the first time.

Note: This appliance can only be used without cord.

To charge the appliance, insert the small plug into the socket in the bottom of the appliance and put the adapter in the wall socket.

- The charge indicator flashes white (Fig. 2): the appliance is charging. Charging takes up to 1 hour.

- The charge indicator lights up white continuously (Fig. 3): the appliance is fully charged and has a cordless operating time up to 60 minutes.

- The charge indicator does not light up when the appliance is switched on: the appliance contains enough energy to be used.

- The charge indicator flashes orange (Fig. 2): the battery is almost empty and needs to be charged.

Note: If the appliance is fully charged but still connected to the mains, the charge indicator flashes a few times when you press the on/off button. This indicates that you should disconnect the appliance from the mains before you can switch it on.

Quick charge

- When the battery is completely empty and you start charging it, the charge indicator flashes white quickly.

- After approximately 5 minutes, the charge indicator starts flashing white slowly. At this point, the battery contains enough energy to finish your shave.

Using the appliance

Switching the appliance on and off

1 To switch on the appliance, press the on/off button once (Fig. 4).

2 To switch off the appliance, press the on/off button once more.

Attaching and detaching heads

1 To attach a head, press it onto the handle ('click') (Fig. 5).

2 To detach a head, press the release button on the back of the appliance (Fig. 6).

Attaching and detaching accessories

1 To attach an accessory, simply snap it onto the head ('click') (Fig. 7).

2 To detach an accessory, grab its front and back and pull it upwards off the head (Fig. 8). To detach a comb, pull its back upwards with a fingernail (Fig. 9).

Shaving and trimming

The appliance is suitable for use in the bath or shower, but you can also use it dry. If you want to use creams or body lotion, apply them after you have used the appliance.

Note: The appliance can only be used without cord.

Note: When you use the appliance to trim hairs, use it dry for the best result.

1 Place the appliance on your skin in such a way that the attachment or accessory is in full contact with the skin (Fig. 10).

2 When you use the appliance on sensitive areas, stretch the skin with your free hand. When you use the appliance on your underarms, raise your arm and put your hand on the back of your head to stretch the skin (Fig. 11).

3 Move the appliance slowly against the direction of hair growth (Fig. 12).

Note: If you move the appliance over your skin too fast, you may not obtain a smooth result.

Shaving head

You can use the shaving head to shave your legs and body.

Note: Always check the foils before use. If they are damaged in any way, replace them right away (see 'Replacement').

Skin stretcher cap

You can attach the skin stretcher cap onto the shaving head to make the hairs stand upright during shaving. This makes it easier to remove them.

Bikini trimmer head (BRL180, BRL170 only)

You can use the bikini trimmer head to trim hard-to-reach areas in the bikini zone.

Place the bikini trimmer head flat onto the skin to trim (Fig 13). Place the bikini trimmer head perpendicularly onto the skin for styling and shaping (Fig 14).

Bikini trimmer comb (BRL180, BRL170 only)

You can attach the bikini trimmer comb onto the bikini trimmer head to trim hairs in the bikini area to a length of 3mm (Fig. 15).

Small shaving head (BRL180 only)

You can use the small shaving head for precision shaving of small areas of your body.

If the hairs in the area to be shaved are longer than 3mm, first pretrim them with the bikini trimmer head.

Place the small shaving head flat onto the skin (Fig. 16).

Cleaning and storage

Keep the adapter dry.

1 Switch off the appliance.

2 Use the cleaning brush to brush away any hairs that have collected under the trimmer of the shaving head.

3 Push the foil holder release slide on the back of the shaving head to the right to remove the foil holder (Fig. 17).

4 Clean all parts of the shaving head with the cleaning brush, except the foils.

5 BRL180 only. To clean the small shaving head, hold the sides of the top part and pull it off the bottom part (Fig. 18). Brush the inside of the top part and the cutter of the bottom part with the cleaning brush (Fig. 19) and then rinse both parts.

6 Rinse the foil holder, heads and accessories under the tap. Shake them firmly to remove water drops.

7 Let all parts dry completely.

8 Place the foil holder back onto the shaving head ('click').

9 Put protection/travel caps or combs on the heads to prevent damage to the heads when you store them.

10 Store the appliance, its heads and accessories in the pouch.

Note: Lubricate trimmer teeth and foils with a drop of sewing machine oil every six weeks for optimal performance.

Replacement

To buy accessories or spare parts, visit

www.shop.philips.com/service or go to your Phillips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details)

For optimal performance, we advise you to replace the foils and cutters of the shaving head every two years. If you use the shaving head twice or more times a week, replace the cutting unit more often. Always replace the foils and cutters with an original set (BRL385).

Français

Introduction