Mikros 90 - Earphones Martin Logan - Free user manual and instructions

Product type	In-ear headphones
Brand	Martin Logan
Model	Mikros 90
Dimensions (per earpiece)	Approximately 1.5 x 1.5 x 2 cm
Total weight	Approximately 15 g
Cable length	1.2 m
Connectivity	3.5 mm jack
Impedance	32 ohms
Sensitivity	100 dB/mW
Frequency response	20 Hz – 20 kHz
Driver	Dynamic, 9 mm
Power	Not necessary (passive)
Main functions	Music listening, hands-free calls (built-in microphone)
Care and cleaning	Clean the ear tips with a soft, dry cloth; do not immerse
Safety	Use at moderate volume to protect hearing
Spare parts and repairability	Silicone ear tips available; cable replacement possible by a professional
General information	Manual available for free download as PDF

Frequently Asked Questions - Mikros 90 Martin Logan

How to clean the Martin Logan Mikros 90 earphones?

Use a soft, dry cloth to wipe the ear tips and housing. Do not use liquid products or immerse the earphones.

What is the impedance of the Mikros 90?

The impedance is 32 ohms, making them compatible with most smartphones and audio players.

Are the earphones compatible with devices without a headphone jack?

No, they require a 3.5 mm jack. A USB-C or Lightning adapter can be used if your device lacks one.

Is there a built-in microphone for calls?

Yes, the Mikros 90 have a built-in microphone on the cable for hands-free calls.

What types of ear tips are included?

Several sizes of silicone ear tips (S, M, L) are included for a comfortable fit.

Is the cable detachable?

No, the cable is fixed. In case of damage, it can be repaired by a professional.

What is the warranty for the Mikros 90?

The standard warranty is 2 years, subject to the manufacturer's conditions.

How to improve listening comfort?

Try the different ear tip sizes and insert them correctly into the ear canal for better sound isolation.

Can I use these earphones for sports?

They are not specifically designed for sports; avoid excessive exposure to sweat.

Where to download the user manual?

The manual is available for free as a PDF on the site notice-facile.com.

USER MANUAL Mikros 90 Martin Logan

Line drawing of a pair of outdoor headphones (no text or symbols)

MARTIN LOGAN®

Made for

iPod 📁 iPhone 📄 iPad

IMPORTANT SAFETY AND OPERATING INSTRUCTIONS. PLEASE READ BEFORE USING YOUR HEADPHONES.

Before placing headphones over ears, set volume to the lowest level then gradually increase until desired volume level is reached. • Avoid listening at high volume levels for long periods of time. Noise levels are measured in decibels (dB). Regular exposure to noise at or above 85dB can cause hearing loss. Monitor your listening as hearing loss happens over time. Refer to the guidelines on the Consumer Electronics Association's website relating to safe listening levels: http://www.

ce.org/PDF/ListenLifetime_spread.pdf • Do not use headphones at times when your attention is required—such as driving, operating heavy machinery, bicycling, or jogging. It is dangerous and in many jurisdictions illegal to drive wearing noise-isolating headphones because it dramatically decreases your chance of hearing life saving sounds around you such as car horns or emergency sirens.

- This product generates strong permanent magnetic fields that could cause in-

terference with cardiac pacemakers and implanted defibrillators (ICDs). Maintain a distance of at least 4-inches (10cm) between the headphones and the medical device. Do not expose product to heat (hair dryer, radiators, etc.) and do not store in direct sunlight for extended periods of time. Protect product from moisture. Avoid dropping and strong impact. Do not pull the cord to remove the headphones from the ear or from the audio device. Clean or replace ear pads prior to use by other persons.

CONTENTS

(1) Headphones
(1) Cable with remote and microphone
(1) 1/4-inch to 3.5mm adaptor
(1) Travel case
(1) Manual

PROPER PLACEMENT

The side with an 'R' is for the right ear. The side with an 'L' is for the left ear. You can also use the cable to distinguish between the right and left side. The cable attaches on the left side.

ADJUSTING THE HEADPHONE SIZE

To adjust the size of the headphones, gently slide each ear cup down and away from the headband.

Diagram of a medical device with a needle inserted into a bulb (no text or symbols present)

Diagram of a showerhead with grid pattern and an arrow indicating flow direction (no text or symbols)

CONNECTING AND REMOVING THE CABLE

Attach the cable to the left side of the headphones. When properly attached, the remote and microphone should be on the side closest to the headphones. To remove the cable, grip the connector between your fingers and gently pull it away from the headphones.

COLLAPSING THE HEADPHONES FOR TRAVEL

Gently slide both ear cups up until they are next to the headband. Swivel each ear cup 90 degrees so the headphones are flat. Place the headphones in the travel case.

REPLACING THE EAR PADS

Gently pinch and pull the old ear pad away from the ear cup. Work the leather edge on back of the new ear pad into the channel around the perimeter of the ear cup. It is sized to fit snugly.

REMOTE: AUDIO FUNCTIONS (SELECT APPLE PRODUCTS)\*

Volume up/down press top button/press bottom button

Play/pause press middle button

Next track press middle button two times (rapidly)

Previous track** press middle button three times (rapidly)**

Voice control press and hold middle button for two seconds when

the iPhone, iPod, or iPad home screen is displayed

REMOTE: PHONE FUNCTIONS (SELECT APPLE PRODUCTS)\*

Answer/end call press middle button

Reject call press and hold middle button for two seconds

*The remote and mic are supported only by iPod nano (4th, 5th, and 6th generation), iPod classic, iPod touch (2nd, 3rd, and 4th generation), iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd generation), iPad 2, and iPad. The remote is supported by iPod shuffle (3rd and 4th generation). Audio is supported by all iPod models.

**Pressing the middle button three times will go to beginning of the current track. Pressing the middle button three times during the first few seconds of a track will go to the previous track.

MICROPHONE AND REMOTE (NON-APPLE PRODUCTS)

The headphones will play audio from any source with a standard 3.5mm 3-conductor (stereo headphone) socket. The microphone will function with most smart phones and similar devices with a standard 3.5mm 4-conductor socket (stereo headphone + microphone). The remote control will function with some non-Apple smart phones, digital media players, and similar devices. Exact functions of the remote will vary by make and model and MartinLogan cannot guarantee compatibility with specific brands or models.

BREAK IN

Allow approximately 15–30 hours of break in at moderate listening levels before any critical listening. Like most high-performance audio reproduction devices, a

break-in period should result in improved performance. For rapid break-in you may choose to leave the headphones connected to an audio source playing music during the night or when otherwise not in use.

CLEANING

To clean the headphones lightly wipe the ear piece and cord with a slightly damp cloth. Never use solvents and other harsh cleaning products as they will permanently damage the headphones.

SPECIFICATIONS (subject to change without notice)

Frequency response . . .6–22,000 Hz

Impedance....26 Ohms with cable

Maximum output.....112.83dB SPL

Sensitivity....98dB (at 1kHz with 1mW input)

Max input power.....300mW

Transducer ....35mm dynamic driver

Noise isolation .....92.05% (-22dB SPL, at 1kHz with 1mW input, 30cm)

Weight.....163g (5.75oz.)

Connector ..... Right angle gold-plated 3.5mm (1/8") 4-conductor plug

Cord....4 foot (1.2m) cable

SPECIFICATIONS: MICROPHONE (subject to change without notice)

Frequency response . . .180Hz—10kHz (-5dB; 3dB)

Pickup pattern.....Omnidirectional

Sensitivity....-42dB (as per 121 R 9-5)

PROBLEMS WITH YOUR HEADPHONES?

Please do not return headphones to the retailer. Contact MartinLogan customer service directly at [phone] or email [e-mail].

WARRANTY

MartinLogan warrants this product against defects in materials and workmanship under normal use and operation for a period of one (1) year from the date of retail purchase by the original end-user purchaser. Maintain your original sales receipt for proof of purchase. For complete warranty information visit our website at www.martinlogan.com/warranty.

DECLARATION OF CONFORMITY

This product is in compliance with the essential requirements and other relevant provisions of directives: EMC 2004/108/EC, RoHS 202/95/EC, WEEE 202/96/EC.

EUROPEAN RECYCLING AND REUSE GUIDELINES

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective August 13, 2005, we would like to notify you that this product may contain regulated materials which upon disposal, according to the WEEE directive, require special reuse and recycling processing. For this reason Martin Logan has arranged with our distributors in European Union member nations to collect and recycle this product at no cost to you. To find your local distributor please contact the dealer from whom you purchased this product, email [e-mail] or visit the distributor locator at www.martinlogan.com.

Please note, only this product itself falls under the WEEE directive. When disposing of packaging and other related shipping materials we encourage you to recycle these items through the normal channels.

Made for

iPod

iPhone

iPad

iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

The remote and mic are supported only by iPod nano (4th, 5th, and 6th generation), iPod classic, iPod touch (2nd, 3rd, and 4th generation), iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd generation), iPad 2, and iPad. The remote is supported by iPod shuffle (3rd and 4th generation). Audio is supported by all iPod models.

"Made for iPod", "Made for iPhone", and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

Inspired by the clarity and detail of MartinLogan's legendary high-end electrostatic loudspeakers.

MARTIN LOGAN®

Designed by MartinLogan. Made in China.

©2012 MartinLogan Ltd. Lawrence, Kansas. All rights reserved.

www.martinlogan.com

rev. 082812

MIKROS™ 90

Line drawing of a pair of outdoor headphones (no text or symbols)

MARTIN LOGAN®

Conçu pour

iPod 📁 iPhone 📄 iPad

DIRECTIVES IMPORTANTES EN MATIÈRE DE SÉCURITÉ

ET D'UTILISATION. VEUILLEZ LIRE CE QUI SUIT AVANT

D'UTILISER VOS ÉCOUTEURS.

Diagram of a medical device with a needle inserted into a bulb (no text or symbols present)

Diagram of a showerhead with grid pattern and an arrow indicating action (no text or symbols)

CONNEXION ET RETRAIT DU CABLE

Frequency response .....180 Hz—10 kHz (-5 dB; 3 dB)

DÉCLARATION DE CONFORMITÉ