ZUFCLASSIW - Vacuum Cleaner ELECTROLUX - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Brand	Electrolux
Model	ZUFCLASSIW
Dimensions (L x W x H)	400 x 250 x 250 mm
Weight	6 kg
Dust Collection Type	Bagless, transparent dust container
Container Capacity	2 liters
Suction Power	900 W
Filtration	Washable HEPA 13
Noise Level	76 dB
Operating Radius	9 meters
Power Cord	6 meters, automatic rewind
Power Adjustment	Electronic dial on the body
Included Accessories	Crevice tool, dusting brush, upholstery brush
Energy Class	A
Filter Maintenance	Wash with water every 3 months
Safety	Automatic shut-off in case of overheating
Spare Parts Available	HEPA filter, dust container, nozzles
Repairability	Repairability index 7.5/10
Warranty	2 years

Frequently Asked Questions - ZUFCLASSIW ELECTROLUX

How to empty the dust container?

Press the release button on the container and empty the contents into a trash bin. Close the container until you hear a click.

How often should I wash the HEPA filter?

Wash the HEPA filter with clean water every 3 months or when the saturation indicator lights up. Let it dry for 24 hours before reinstalling.

What to do if suction power decreases?

First check if the container is full or the filter is clogged. Also clean the nozzle and hose to remove any blockages.

Can I use the vacuum for ashes?

No, this vacuum is not designed for picking up hot ashes, soot, or liquids. Use a vacuum suitable for these purposes.

How to use the power dial?

The dial is located on top of the appliance. Turn the knob to increase or decrease suction power depending on the surface to be cleaned.

Can the hose be detached for storage?

Yes, you can disconnect the hose from the main body by pressing the latches. Store each part separately to save space.

How to rewind the power cord?

Hold the plug and briefly press the rewind pedal. The cord rewinds automatically. Do not let it whip.

What does the red light mean?

The red light indicates an obstruction or a saturated filter. Refer to the manual to locate and resolve the issue.

The vacuum makes an abnormal noise, what should I do?

Stop the appliance and check if an object is stuck in the nozzle or hose. Also clean the filter and empty the container.

Where to buy spare parts?

You can order filters and accessories on the Electrolux website or from authorized dealers. Use model number ZUFCLASSIW to find compatible parts.

USER MANUAL ZUFCLASSIW ELECTROLUX

WE'RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You've chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information: www.electrolux.com

Register your product for better service: www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

ENVIRONMENT CONCERNS

Recycle the materials with the symbol 📊. Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol 📊 with the household waste. Return the product to your local recycling facility or contact your municipal office department for household waste or the shop where you purchased this product.

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information.

General information and tips

Environmental information.

Subject to change without notice.

SAFETY INSTRUCTIONS

Caution! Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. The extractor hood has been designed exclusively for domestic use.

Caution! Do not connect the appliance to the mains until the installation is fully complete. Before any cleaning or maintenance operation, disconnect hood from the mains by removing the plug or disconnecting the mains electrical supply.

Always wear work gloves during the maintenance, installation and lighting operations. The appliance is not intended for use by children or persons with impaired physical, sensorial or mental faculties, or if lacking in experience or knowledge, unless they are under supervision or have been trained in the use of the appliance by a person responsible for their safety. This appliance is designed to be operated by adults, children should be monitored to ensure that they do not play with the appliance. This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the appliance. Never use the hood without effectively mounted grating! The hood must NEVER be used as a support surface unless specifically indicated. The premises where the appliance is stalled must be sufficiently ventilated, when the kitchen hood is used together with other gas combustion devices or other fuels. The ducting system for this appliance must not be connected to any existing ventilation system which is being used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels. The flaming of foods beneath the hood itself is severely prohibited. The use of exposed flames is detrimental to the filters and may cause a fire risk, and must therefore be avoided in all circumstances. Any frying must be done with care in order to make sure that the oil does not overheat and ignite.

Caution! Accessible parts of the hood may become hot when used with cooking appliance.

With regards to the technical and safety measures to be adopted for fume discharging it is important to closely follow the regulations provided by the local authorities. The hood must be regularly cleaned on both the inside and outside (AT LEAST ONCE A MONTH).

This must be completed in accordance with the maintenance instructions provided in this manual). Failure to follow the instructions provided in this user guide regarding the cleaning of the hood and filters will lead to the risk of fires. Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks. We will not accept any responsibility for any faults, damage or fires caused to the appliance as a result of the non-observance of the instructions included in this manual.

⚠ Warning! Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.

2. USE

The hood serves to aspirate the fumes and vapors resulting from cooking.

The attached installation manual indicates the version to be used depending on the model you have, the suction version with

external evacuation or filtering with internal recirculation.

3. INSTALLATION

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III in accordance with installation instructions.

Warning! Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled.

The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood must be not less than 43cm from electric cookers and 65cm from gas or mixed cookers. If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

4. MAINTENANCE

ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. The cooker hood should be cleaned regularly (at least with the same frequency with which you carry out maintenance of the fat filters) internally and externally. Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. DO NOT USE ALCOHOL!

Warning! Failure to carry out the basic cleaning recommendations of the cooker hood and replacement of the filters may cause fire risks. Therefore, we recommend observing these instructions. The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

4.1 Grease filter - The grease filter must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

4.2 Washable activated charcoal filter

The charcoal filter can be washed once every two months using hot water and a suitable detergent, or in a dishwasher at 65^ C (if the dishwasher is used, select the full cycle function and leave dishes out). Eliminate excess water without damaging the filter, then put it in the oven for 10 minutes at 100^ C to dry completely. Replace the mattress every 3 years and when the cloth is damaged.

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. CONTROLS

Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

The speed control is on the front of the hood.

Turns the Motor off.

Turns the Motor on at Speed one. Button lights up continuously.

Turns the Motor on at Speed two. Button lights up continuously.

When pressed briefly, turns the Motor on at Speed three. Button lights up continuously.

Pressed for 2 Seconds. Button flashes.

Activates Speed four with a timer set to 10 minutes, after which it returns to the speed that was set previously. Suitable to deal with maximum levels of cooking fumes.

Turns the Lighting System on and off. Button lights up continuously.

6. LIGHTING

The hood is equipped with a lighting system based on LED technology.

The LEDs guarantee an optimum lighting, a duration up to 10 times as long as the traditional lamps and allow to save 90% electrical energy.

Caution! Do not look directly into the LED light.

For replacement, contact the technical service.

WIR DENKEN AN SIE

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. BEDIENELEMENTE

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical component with two views: top shows a rectangular plate assembly, bottom shows a multi-layered tray with a handle and a magnified inset (no text or symbols)

5. COMMANDES

1! VEILIGHEIDSVOOR- SCHRIFTEN

Illustration of a hand using a cutting tool to adjust a metal bracket (no text or symbols visible)

4.2 Wasbaar koolstofffilter

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. BEDIENINGSELEMENTEN

Illustration of a hand holding a metal tool with a triangular blade (no text or symbols)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. MANDOS

www.electrolux.com/productregistration

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. COMANDOS

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. COMANDI

WE'RE THINKING OF YOU

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. KOMMANDON

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. KONTROLLER

WE'RE THINKING OF YOU

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. OHJAIMET

Hand holding a tool with a metal bracket and arrow, no text or symbols visible

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. BETJENING

Illustration of a hand holding a tool with a metal bracket and a triangular pointer (no text or symbols)

Technical illustration of a mechanical component with two views: top shows a rectangular plate assembly, bottom shows a slot-like structure with a handle (no text or symbols)

Illustration of a hand using a cutting tool to adjust a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. JUHIKUD

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. VADĪBAS ELEMENTI

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

4.2 Plaunamas aktyviosios anglies filtras

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. VALDYMAS

www.electrolux.com/productregistration

Technical illustration of a mechanical component with two views: top shows a rectangular plate assembly, bottom shows a slot-like structure with a handle (no text or symbols)

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. KEZELÖSZERVEK

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. PŘÍKAZY

Illustration of a hand holding a circular component with a screwdriver, and a circular dial indicator (no text or symbols)

MYSLÍME NA VÁS

1. ⚠️ BEZPEČNOSTNÉ POKYNY

Illustration of a hand holding a metal tool with a triangular blade (no text or symbols)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. OVLÁDAČE

www.electrolux.com/productregistration

Illustration of a hand holding a tool with a cutting tool, no text or symbols present

4.2 Filtru cu carbon activ lavabil

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. COMENZI

www.electrolux.com/productregistration

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

Technical illustration of a mechanical component with two views: top shows a rectangular plate with hinged edges, bottom shows a flat plate with a handle and a circular inset detail (no text or symbols)

5. STEROWANIE

www.electrolux.com/productregistration

Kupovinu dodatne opreme, potrošnog materijala i originalnih rezervnih dijelova za vaš uređaj:

www.electrolux.com/shop

BRIGA ZA OKOLIŠ

Reciklirajte materijale sa simbolom . Ambalažu za recikliranje odložite u prikladne spremnike.

Pomozite u zaštiti okoliša i ljudskog zdravlja, kao i u recikliranju otpada od električnih i elektroničkih uređaja. Uređaje označene simbolom ne bacajte zajedno s kućnim otpadom. Proizvod odnesite na lokalno reciklažno mjesto ili kontaktiraje nadležnu službu.

BRIGA O KUPCIMA I SERVIS

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. NAREDBI

Upotrebljavajte veću brzinu u slučaju velikog prisustva pare u kuhinji.

Savjetujemo da uključite usisavanje 5 minuta prije nego što počnete s kuhanjem i da ostavite da djeluje nakon što ste završili s kuhanjem za još otprilike 15 minuti.

Komande se nalaze na prednjoj strani kuhinjske nape:

Isključuje motor.

Illustration of a hand holding a metal tool with a triangular blade (no text or symbols)

4.2 Pralni filter z aktivnim ogljem

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. UPRAVLJALNI GUMBI

Illustration of a hand using a tool to adjust or install a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. XEIPISTHPIA

Illustration of a hand using a cutting tool to adjust a metal sheet (no text or symbols visible)

Technical illustration of a mechanical component with two views: top shows a rectangular plate, bottom shows a rectangular slot with a handle and a magnified inset (no text or symbols)

5. KONTROLLER

www.electrolux.com/productregistration

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. УПРАВЛЕНИЯ

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

www.electrolux.com/productregistration

Hand holding a mechanical tool with a bracket and lever mechanism (no text or symbols visible)

Technical illustration of a mechanical component with two views: top shows a rectangular plate assembly, bottom shows a sliding mechanism (no text or symbols)

5. КОНТРОЛИ

www.electrolux.com/productregistration

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. KOMANDIMET

Illustration of a hand using a tool to cut or adjust a mechanical component (no text or symbols visible)

Technical illustration of a mechanical assembly with two views showing internal components (no text or symbols)

5. КОМАНДЕ

Technical illustration of a solar panel assembly with mounting brackets and a magnified inset showing internal structure (no text or symbols)

Illustration of a hand using a cutting tool to cut a metal sheet (no text or symbols visible)

www.electrolux.com/productregistration

Abstract geometric composition with two overlapping white circles on a light gray background (no text or symbols)