SON01 - Vacuum Cleaner ELECTROLUX - Free user manual and instructions
Find the device manual for free SON01 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vacuum Cleaner |
| Brand | Electrolux |
| Model | SON01 |
| Color | White / Red (depending on market) |
| Dimensions (W x D x H) | 28 x 26 x 40 cm |
| Weight | 5.5 kg |
| Power Supply | Mains 220-240 V ~ 50 Hz |
| Power Consumption | 2200 W |
| Dust Container Type | Bagless, 2.0 L capacity |
| Filtration System | HEPA exhaust filter |
| Cord Length | 5 m |
| Noise Level | 76 dB (A) |
| Cleaning Surfaces | Carpets, rugs, hard floors |
| Steering System | Swivel steering for easy maneuverability |
| Included Accessories | Crevice nozzle, dusting brush |
| Filter Care | Washable pre-filter; replaceable HEPA filter |
| Safety Features | Overheat protection, automatic cord rewind |
| Spare Parts Available | Filters, brush roll, nozzles |
| Repairability | Modular construction for easy part replacement |
| Energy Efficiency Class | A |
| Purpose | Domestic dry vacuum cleaning |
Frequently Asked Questions - SON01 ELECTROLUX
How do I assemble the SON01 vacuum cleaner?
Start by attaching the handle into the main body until it clicks. Then attach the flexible hose to the front inlet and secure the telescopic tube to the hose. Finally, fit the desired floor nozzle onto the tube.
How do I start vacuuming with the SON01?
Plug the power cord into a 220-240 V outlet, press the on/off switch on the body, and adjust the suction power using the power dial if available. Guide the floor nozzle smoothly over the surface.
How often should I clean the filter?
Inspect the filter every 2-3 weeks depending on use. Clean a washable pre-filter with water and let it dry completely before reinstalling. Replace the HEPA filter every 6-12 months or when suction decreases significantly.
How do I replace the HEPA filter?
Open the filter cover on the rear of the unit, remove the old HEPA filter, and insert a new Electrolux-compatible filter. Ensure it is seated correctly before closing the cover.
What should I do if the suction power drops?
Check for blockages in the hose, tube, or nozzle. Empty the dust container if full. Clean the pre-filter and verify the HEPA filter is not clogged. If the problem persists, consult the troubleshooting section of the manual.
How do I rewind the power cord safely?
To rewind, switch off the vacuum, unplug from the wall outlet, and press the cord rewind button. Hold the plug with one hand while rewinding to prevent whipping, and guide the cord evenly.
Can I use the vacuum on hardwood floors?
Yes, the SON01 is suitable for hard floors. Use the hard floor nozzle or set the brush on the floor nozzle to the appropriate position to avoid scratches.
How do I dispose of dust from the bagless container?
Press the release latch to detach the dust container. Open the lid over a trash bin and empty the dust. Rinse the container with water if needed and dry it thoroughly before reattaching.
What safety precautions should I follow?
Never vacuum liquids, hot ashes, or sharp objects. Keep the cord away from heat sources and sharp edges. Do not use the unit without filters in place. Always unplug before maintenance or cleaning.
How can I store the vacuum cleaner?
For storage, detach the accessories and place them in the accessory holder. Use the upright storage position or hang the unit using its carrying handle. Keep the vacuum in a dry place, off the floor if possible.
User questions about SON01 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual SON01 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SON01 by ELECTROLUX.