NVR-128 D - Radio NEVIR - Free user manual and instructions

Product Type	AM/FM Portable Radio
Brand	Nevir
Model	NVR-128 D
Frequency Bands	AM (MW) and FM (VHF)
Tuning Type	Analog (dial knob)
Speaker	Built-in monaural speaker
Headphone Jack	3.5mm stereo jack
Antenna	Telescopic rod for FM, built-in ferrite for AM
Power Source	3x AA batteries (1.5V each) or optional AC adapter
Battery Life	Approximately 30 hours with alkaline batteries
Dimensions (approx)	200 x 120 x 60 mm (7.9 x 4.7 x 2.4 in)
Weight (without batteries)	0.5 kg (1.1 lbs)
Controls	Power/Volume dial, Tuning dial, Band selector switch
Indicators	Power indicator (LED) and tuning dial scale
Carrying Handle	Retractable handle on top
Cleaning	Wipe with a soft dry cloth; do not use liquids or solvents
Safety Warnings	Do not expose to rain or moisture; avoid direct sunlight and heat sources
Spare Parts / Repairability	No user-serviceable parts; contact authorized service center for repairs
Country of Origin	China (typical for Nevir)

Frequently Asked Questions - NVR-128 D NEVIR

How do I turn on the Nevir NVR-128 D radio?

Rotate the Power/Volume dial clockwise until you hear a click. The power indicator LED should light up.

What type of batteries does the NVR-128 D use?

It requires three AA batteries (1.5V each). Alkaline batteries are recommended for longer life.

Can I use an AC adapter instead of batteries?

Yes, you can use an optional AC adapter with a 4.5V DC output and a 2.1mm barrel plug (center positive).

How do I switch between AM and FM?

Use the Band selector switch on the side of the radio. Slide it to AM for medium wave or FM for VHF.

Why is FM reception poor?

Extend the telescopic antenna fully and adjust its position. FM reception requires a clear line of sight to the broadcast tower.

How can I improve AM reception?

Rotate the entire radio to align the built-in ferrite antenna. Keep it away from metal objects and electronic devices.

Is there a headphone jack?

Yes, there is a 3.5mm stereo jack on the side. Inserting headphones automatically disconnects the built-in speaker.

How do I clean the radio?

Use a soft dry cloth to wipe the exterior. Do not use water, alcohol, or any liquid cleaners.

What should I do if the radio won't turn on?

Check that batteries are installed with correct polarity (+/-). Replace with fresh batteries or try a different set. If problem persists, try an AC adapter.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format. Search for Nevir NVR-128 D.

USER MANUAL NVR-128 D NEVIR

Technical line drawing of a mechanical component with no visible text or symbols

Line drawing of a mechanical component with labeled part '14' (no other text or symbols)

Line drawing of a mechanical component with labeled part '14' (no other text or symbols)

CONTROL LOCATION

1. ON / STANDBY
2. BAND/TIMER SET
3. PROGRAM/CLOCK SET
4. VOLUME -
5. VOLUME +
6. TUNING +
7. TUNING -
8. PRESET +
9. PRESET -
10. LCD DISPLAY
11. PHONES
12. ROD ANTENNA
13. CARRYING HANDLE
14. BATTERY COMPARTMENT COVER

Open the battery compartment and insert as indicated in the compartment three Batteries, type R20, UM1 or D cells.

For Clock backup, insert as indicated in the compartment two Batteries, type R03, UM4 or AAA cells.

Mains Supply

If the set is equipped with a 127/220V selector, set this selector to the local mains voltage.

Connect the mains lead to the wall socket. The mains Supply is switched on.

To disconnect the set from the mains completely, withdraw the mains plug from the wall socket.

Setting The Clock

1. Check the radio is switched off.
2. Press CLOCK SET for 3 seconds on the front panel to start clock setting.
3. Press Tuning + button for 12-hours/24-hours selection.
4. Press CLOCK SET on the front panel to hour setting.
5. To set the hours, press TUNING + or TUNING - while the display is still flashing.
6. Press CLOCK SET on the front panel to minute setting.
7. To set the minutes, press TUNING + or TUNING - while the display is still flashing.
8. Press CLOCK SET on the front panel to complete the clock setting.

Setting The Alarm

1. Check the radio is switched off.
2. Press TIMER SET for 3 seconds on the front panel to start alarm setting.
3. To set the hours, press TUNING + or TUNING - while the display is still flashing.
4. Press TIMER SET on the front panel to minute setting.
5. To set the minutes, press TUNING + or TUNING - while the display is still flashing.
6. Press TIMER SET on the front panel to complete the alarm setting.

Remark: Press TIMER SET to enable / disable the alarm function. To make sure the alarm icon is switch on if alarm function is in using,

Radio

1. Press ON / STAND BY to switch on the radio.
2. Press BAND once or more to select FM or AM waveband.
3. The display shows the radio station details throughout the radio mode.
4. Select your station by using TUNING + or TUNING -
5. Adjust the sound with VOLUME.
6. To switch off the radio, press ON / STAND By once.

Tuning

Manual tuning

Press TUNING + or TUNING – briefly, once or more until the right frequency is found.

Automatic tuning

1. Press and hold down TUNING + or TUNING – until the display frequency starts to run.
2. When a station of sufficient strength has been found tuning stops, or you can stop automatic tuning by pressing TUNING + or TUNING – again.

Presets

You can store the frequencies of up to 50 radio stations in the memory, (30 in FM wave bands; 20 on AM wave band). A stored frequency can be erased from the memory by storing another frequency in its place.

1. Press PROGRAM once to enter programming mode.
2. Select your wave band and tune to your desired station (See TUNING).
3. Press PROGRAM once again to confirm the selected station.
4. Press PRESET + or PRESET – to select the desired memory location.
   5 To listen to a preset station:
5. select your waveband;
6. press the PRESET + or PRESET – for selecting your desired station.

To improve reception:

- For FM, pull out the telescopic aerial. To improve FM Reception incline and turn the aerial, reduce its length if the FM-signal is too strong (very close to a transmitter).

- For AM, the set is provided with a built-in aerial, so there is no need to use the telescopic aerial. Turn the set to find the best position.

Volume

Adjust the sound with the controls VOLUME + or VOLUME -

You may connect headphones with 3.5mm, plug to socket PHONES. The loudspeaker is then muted.

SPECIFICATIONS

Speaker: 3.5 inches, 8 ohm dynamic speaker

Power Output: 0.9W

Battery Operate: DC (3 "UM-1 / D" 4.5V)

Battery backup for clock: DC (2 "UM-4 / AAA" 3V)

AC Operate: 220V \~ 50Hz

PRECAUTIONS:

1. For AC operation, make sure the voltage is compatible. Always use the provided AC power cord; never use other AC power cord.
   For DC operation, simply insert three "UM-1 / D" batteries for unit operation; simply insert two "UM-4 / AAA" batteries for clock operation.

2. Always disconnect the AC power cord from the AC power source when it is not in use or when DC power is operating.

3. Do not leave the batteries in the compartment for a long time. Remove the batteries to avoid leakage and damage.

4. Do not expose the unit to extreme temperature nor high humidity to ensure normal functioning for a long lifetime.

For instances, never place the unit in bathing areas nor around stoves and radiators.

1. If you find the unit is not working properly, please take it to your nearest services centre. Do not attempt to repair by yourself.

WARNING :

To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet, refer to service agent or qualified engineer only.

This symbol indicates that when the end-user wishes to discard this product, it must be sent to separate collection facilities for recovery and recycling. By separating this products from other household-type waste, the volume of waste sent to incinerators or land fields is reduced and natural resources will thus be conserved.

"In order to fulfill ruling UNE EN-60065, we indicate that if the flexible wire is damaged, it can only be substituted by a technical service recognized by NEVIR, S.A., as per special tooling is required"

Modelo NEVIR: NVR-128D