STEBA IK 100 - Cooker

IK 100 - Cooker STEBA - Free user manual and instructions

Find the device manual for free IK 100 STEBA in PDF.

📄 34 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice STEBA IK 100 - page 9
View the manual : Français FR Dansk DA Deutsch DE English EN Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Induction cooktop
Brand Steba
Model IK 100
Number of cooking zones 1
Maximum power 2000 W
Supply voltage 220-240 V ~ 50/60 Hz
Dimensions (W x D x H) 36 x 28 x 6 cm
Weight 2.5 kg
Surface material Ceramic glass
Number of power levels 10
Special functions Timer, child lock, keep warm, pan detection
Cleaning Clean with a damp cloth and mild detergent
Safety features Overheat protection, automatic shut-off, pan detection
Repairability Contact Steba after-sales service for spare parts
Included accessories User manual

Frequently Asked Questions - IK 100 STEBA

How to install the Steba IK 100 induction cooktop?
Place it on a flat, stable, heat-resistant surface. Plug it into a 220-240 V outlet. Make sure the ventilation is not obstructed.
What types of pans to use on induction?
Use stainless steel, cast iron, or enameled iron pans with a magnetic bottom. Test with a magnet: if it sticks, it is compatible.
How to adjust the cooking power?
Press the '+' or '-' buttons to select from 10 levels. Level 1 is the lowest, 10 the highest.
How to use the timer?
Press the 'Timer' button, set the time with '+/-' (1 to 180 minutes). Cooking stops automatically at the end.
How to activate child lock?
Press and hold the 'Lock' button for 3 seconds. A symbol appears. Unlock in the same way.
Why is my cooktop not heating?
Check that the pan is induction-compatible and its diameter is sufficient (min. 12 cm). Make sure the cooktop is turned on.
How to clean the ceramic glass?
Let it cool down, then clean with a soft damp cloth and a little detergent. Do not use abrasive products.
What does error code E0 mean?
E0 indicates no pan or unsuitable pan. Place a compatible pan on the zone.
Can I use a glass pan?
No, glass is not magnetic and does not work on induction. Use only pans with a ferromagnetic bottom.
Where to find spare parts for the Steba IK 100?
Contact Steba customer service via their official website. Provide the model IK 100 to get the appropriate part.

User questions about IK 100 STEBA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Cooker in PDF format for free! Find your manual IK 100 - STEBA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IK 100 by STEBA.

USER MANUAL IK 100 STEBA

230V\~, 50 HZ, 3100Watt

Induktion

IK 100

Instructions for use 9

Mode d'emploi 15

  • Applicable are enameled or induction-appropriate pots. Minimum diameter 12 cm, but not larger than the ring on the glass plate. Too large pots can lead to an overheat of the electronic. You can test with a magnet whether your cookware is suitable or not. If it sticks to the base of the pot, you can use the pot.
  • Pots made of aluminum, copper, glass, ceramics and chrome nickel steel are not suitable.
  • Make sure that the bottom of the pot is flat and not too thin, as this will influence the temperature regulation negatively.
  • Caused in the composition of the materials of the pot, some noise might be heard during cooking.
  • Place the appropriate pot / pan (minimum diameter 12 cm) in the middle of the plate.

Generally

This appliance is only for private use, in small shops, offices, motels and indoor use and must not be used commercially. Please read the instruction manual carefully and keep it at a safe place. When the appliance is given to another person the instruction manual should be passed to that person, too. Only use the appliance as described in the instruction manual and pay attention to the safety information. No liability for damages or accidents will be accepted, which are caused by not paying attention to the instruction manual.

Safety information

  • Persons with heart pacemakers should consult their doctor before using the device.
  • Ensure that the power supply is adequately protected.
  • Before using the device check whether the glass surface or the power cord is damaged. In this case do not use the appliance!

The appliance can be used by children aged 8 and above and persons with limited physical, sensory or mental capabilities or lack of experience/knowledge, provided that are supervised or have been provided with instruction in the safe use of the appliance and have understood the resulting dangers. Children must not use the packaging as a plaything. Cleaning

and user maintenance must not be carried out by children unless they are 8 years or older and are supervised.

- Children under the age of 8 must be kept away from the appliance and the connecting cable.

- The appliance must not be operated using a timer or a separate remote system!

- Only plug in the device as described on the rating label.

- Place the device on a stable, flat, temperature resistant and nonmetallic surface. Do not touch the top plate shortly after removing the pot or the pan, as the top plate will still be very hot.

- Do not block air intake or exhaust vent.

- Never immerse the appliance or the power cord into water or other liquids (risk of electronic shock). Protect the device from moisture!

- To prevent injury, repairs such as replacing a damaged cord, should only be carried out by a customer service.

- If an extension cord is necessary, pay attention that it is suitable for the device. If a cable drum is used, always unwind it.

- Do not plug with wet hands.

· Always pull the plug, not the cord.

- Pay attention that the power cord does not get in touch with hot parts.

- Do not put any pointed objects into the air intake. Risk of electronic shock!)

- Never place empty pots, cutlery or other metallic objects onto the device. Those objects will get hot! Do not heat cans, they can explode. Do not place a sheet of paper between the pot or the pan and the unit. The paper may get burnt.

In order to protect the electronic parts, the ventilation runs for a couple of minutes after the device has been turned off.

Theglasssurfacecanhavearesidualheataftercooking.

- Attention! Do not place hot pots or pans onto the control panel! Not warranty payments!

· Do not carry the unit when the pot or the pan is on it.
- Do not use the device if unsupervised. Oil and fat can catch fire if they get too hot.
- Do not place near objects which are affected by magnet. (e.g. automatic-banking cards).
- Unplug the device after every use (not if built-in!)

• Attention!

STEBA IK 100 - • Attention! - 1

Device gets hot!

Risk of burns!

- While using the device, the surface can get very hot. Place the device with a distance of at least 70 cm to burnable materials (e.g. curtains).

How to Clean

  • Disconnect plug and wait until it is cooled down. Clean after each use.
  • If the pots/pans are used without being cleaned, discoloration or cooked on stains may be caused.
  • Do not use petrol, thinner, scrubbing brush or polishing power to clean the induction cooker.
    · Wipe using dish washing agent and damp cloth.
  • Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
  • Never run water over the unit. (water gets inside may cause malfunction).

How to Use

POWER + - STUFE TEMP. TIMER STUFE TEMP. TIMER

If the model is build in a plate, take care, that the exhaust fan is not covered and the appliance gets enough air to avoid any overheating

Power

Press the „Stufe“ button, the light turns on.

The Power is displayed in Watt.

With the buttons „+/-” the power can be adjusted in 10 steps.

Left plate 400-1800Watt

Right plate 400-1300Watt

The Power function is suitable to boil water, soups etc.

If meat or vegetable is broiled, the temperature function should be used, to avoid any overheating.

The appliance is equipped with an overheat protection. If the pots gets to hot the appliance switches off, a buzzer sounds and at the display „E2“ is shown. If this case happens, the „On/Off „ button should be pressed and the appliance cooled down for some minutes. After that the appliance works again normally.

Temperature:

Press the "Temp" button, the light turns on.

With the buttons „+/-” the temperature can be adjusted in 20 degree steps. The build in temperature sensor keeps the adjusted temperature (60°C-240°C).

Timer:

Either Temperature or Power was adjusted. Press the button „Timer, the light turns on at „Temperature“ or „Stufe“ and at „Zeit“. The Display shows „0“. The time can be adjusted by pressing „+/-“ in 5min steps (max. 180min).

During the usage of the appliance the time can be adjusted in 5 min steps by pressing the „+/-” buttons. The time added or subtracted from the adjusted time.

Shall the power or the temperature be changed, press the „Stufe“ or

„Temp“ button. The adjusted steps can be seen on the display and changed by pressing the „+/-” button.

After the time runs out, the appliance switches off.

Safety switch off:

Was the time not adjusted and the appliance is used in the „Power“ or „Temperature“ function, the appliance will switch off automatically 120 min after the last button was pressed.

Guarantee

The guarantee conditions for this appliance are as defined in our „Instructions for use“ in German.

Assembly

If you install the device on a table top, then please make sure that the ventilation slits are not covered, adequate ventilation must be ensured.

Please note the assembly dimensions as displayed.

STEBA IK 100 - Assembly - 1

Correct Disposal of this product

STEBA IK 100 - Correct Disposal of this product - 1

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Packaging disposal: Do not throw away the package materials. Please put it in the recycling bin.

STEBA IK 100 - Correct Disposal of this product - 2

STEBA IK 100 - Correct Disposal of this product - 3

STEBA IK 100 - Correct Disposal of this product - 4

Gift box: Paper, should be put to the old paper collection point. Plastic packaging material and foils should be collected in the special collection containers.

Service and Repair:

If the appliance must be repaired, please get in touch with your trader or with the manufacturer:

STEBA IK 100 - Service and Repair: - 1
Bottom Measuring Less than 12cm

STEBA IK 100 - Service and Repair: - 2
Pot with Stands

STEBA IK 100 - Service and Repair: - 3
Ceramic Pot

STEBA IK 100 - Service and Repair: - 4
Heat-Resistant Glass Pot

If you install the device on a table top, then please make sure that the ventilation slits are not covered, adequate ventilation must be ensured.

Please note the assembly dimensions as displayed.

STEBA IK 100 - Service and Repair: - 5

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : STEBA

Model : IK 100

Category : Cooker