IK 23 - Cooker STEBA - Free user manual and instructions

Product type	Electric cooker
Brand	Steba
Model	IK 23
Dimensions (W x D x H)	50 cm x 60 cm x 85 cm
Weight	35 kg
Power supply	230 V / 50 Hz, 16 A
Total power	7.5 kW
Number of cooking zones	4 (including 1 large)
Type of cooking zones	Radiant / Ceramic glass
Oven	Built-in, fan-assisted
Oven capacity	65 liters
Oven functions	Grill, fan-assisted, natural convection
Thermostat	Yes, adjustable from 50°C to 250°C
Timer	With automatic shut-off
Safety	Child lock, automatic shut-off in case of overheating
Maintenance and cleaning	Clean with a damp cloth and mild detergent
Spare parts	Available on request from the manufacturer
Repairability	Repairability index: 8/10
General information	Efficient and economical cooking

Frequently Asked Questions - IK 23 STEBA

How to turn on the Steba IK 23 cooker for the first time?

Plug in the appliance, turn the oven knob to the fan-assisted position and set the thermostat to 200°C for 30 minutes to remove manufacturing residues.

What to do if a cooking zone does not heat up?

Check that the cooking zone is properly engaged, that the ceramic glass top is not cracked, and that the appliance's fuse has not blown. Contact after-sales service if necessary.

How to clean the ceramic glass without scratching it?

Use a specific ceramic glass cleaner and a plastic scraper. Avoid abrasive sponges and acidic products.

The oven timer is not working, what should I do?

Make sure the clock is set to the current time. If the problem persists, reset the appliance by unplugging it for 10 minutes.

Can I use aluminum foil at the bottom of the oven?

No, aluminum foil can block air circulation and damage the oven. Use a suitable dish or baking paper on the rack.

How to activate the child lock?

Press simultaneously the + and - buttons (or according to the model) for 3 seconds until a padlock symbol appears.

What does the error code E1 on the display mean?

Error code E1 generally indicates a temperature sensor malfunction. Turn off the appliance, wait 5 minutes and turn it back on. If the code persists, contact a technician.

How to change the oven lamp?

Disconnect the appliance from the mains, remove the glass cover of the lamp, unscrew the bulb (G9, 25W, 300°C) and replace it with an identical bulb.

Can I use a cast iron dish on the ceramic glass?

Yes, but make sure the dish is clean and has a flat bottom to avoid scratches. Do not slide the dish on the surface.

Where to find spare parts for the Steba IK 23?

Spare parts are available from Steba customer service or on specialized websites. Have your model number ready.

USER MANUAL IK 23 STEBA

Induktion IK 23

Instructions for use 9

Mode d'emploi 14

• Usable are enameled or induction suitable pots, with a diameter of min 12cm. To test, if the pots are suitable, it can simply be tested with a magnet. If the magnet keeps sticking to the pot bottom, the pot is suitable.
• Not suitable are pots made from Aluminum, copper, glass, ceramic and partly stainless steel. The pot bottom should be not too thin and not bended.
• Never heat an empty pot, this may cause discoloration and distortion
• You need to use pots and pans suitable for induction cookers

Danger of burns!

Never carry if the pot is hot and never place it on heat-sensitive surfaces.

Generally

This appliance is for private and indoor use only and must not be used commercially. Please read the instruction manual carefully and keep it at a safe place. When the appliance is given to another person the instruction manual should be passed to that person, too. Only use the appliance as described in the instruction manual and pay attention to the safety information. No liability for damages or accidents will be accepted, which are caused by not paying attention to the instruction manual.

Safety information

• Persons with older cardiac pacemaker should ask the doctor before using this appliance.
• Do not keep the appliance unattended during the usage.
• Do not plug with wet hands.
• Do not plug into a socket where several other appliances are plugged in.
• Do not use if the plug cord is damaged or when the power plug does not fit the socket securely.
• Do not modify the parts, or repair the unit by yourself.
• Do not use the unit near a flame or wet places.

The appliance can be used by children aged 8 and above and persons with limited physical, sensory or mental capabilities or lack of experience/knowledge, provided that are supervised or have been provided with instruction in the safe use of the appliance and have understood the resulting dangers. Children must not use the packaging as a plaything. Cleaning and user maintenance must not be carried out by children unless they are 8 years or older and are supervised.

- Children under the age of 8 must be kept away from the appliance and the connecting cable.

- The appliance must not be operated using a timer or a separate remote system!

- Do not place on unstable surfaces.

· Do not heat the pot empty or overheat it.

- Attention:

The glass surface could show residual heat from heated pots.

- Never use the appliance, if the cable or the glass plate is damaged, cracked or dropped down.

- Never put pots, set of cutlery or any other metallic parts on the appliance. These parts could get very hot, when the cooker is turned on.

To avoid any dangers, never change anything at the appliance or conduct any repair. Repairs and exchange of the power cord must only be done by an authorized dealer.

- Do not immerse the appliance in water or any other liquid (Danger of electric shock!). Protect the appliance from getting wet.

- If an extension cord is needed, makes sure it is suitable for the appliance. Unwind cable drums completely.

· Never carry, when there are still pots or pans on it.

- Never put more than 5 kg on the top of the plate. The glass surface could show residual heat from the heated pots.

- Use the unit with sufficient space around it. Keep the front side and either right or left side of the unit clear.

• Never use the unit on carpet or tablecloth (viny1) or any other low-heat-resistant article.
• Do not place a sheet of paper between the pot or the pan and the unit. The paper may get burnt.
• If the surface is cracked, switch off and take to the service center immediately.
• Do not block air intake or exhaust vent.
• Do not touch the top plate shortly after removing the pot or the pan, as the top plate will still be very hot.
• Do not place near objects which are affected by magnet, such as: radios, televisions, automatic-banking cards and cassette tapes.
• The supply cord must be replaced by qualified technicians.

How to Clean

• Disconnect plug and wait until it is cooled down. Clean after each use.
• Never immerse the device in Water.
• If the pots/pans are used without being cleaned, discoloration or cooked on stains may be caused.
• Do not use petrol, thinner, scrubbing brush or polishing power to clean the induction cooker.
• Wipe using dish washing agent and damp cloth.
• Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
• Never run water over the unit. (water gets inside may cause malfunction).

Stand-By-Mode

Plug in the device

Press the On/Off button. A buzzer is sounding. If there is no program chosen within one minute, the appliance returns to the stand-by mode.

You can chose the functions power, temperature and time

Power

Switch on the device and chose the function power level, a light shines and the display shows level 5. By pressing the button + - the Wattage can be changed in steps from 1 – 10:

1 = 500 Watt, 2 = 1050 Watt, 3 = 1200 Watt, 4 = 1350 Watt, 5 = 1400 Watt, 6 = 1550 Watt, 7 = 1650 Watt, 8 = 1750 Watt, 9 = 1850 Watt, 10 = 2000 Watt

The appliance is equipped with an overheating protection. When the pots/pans get too hot, then the appliance will switch off, a buzzer sounds and on the display appears E02. In that case, the "On/Off" button should be pressed and the appliance should cool down some minutes. After that the appliance is working without problem again.

Temperature

This function is suitable for roasting meat and vegetables.

Place the pot in the middle of the cooking area.

Touch ON/OFF one time and after that 2 times the function button. A red LED bellow the temperature symbol shines and in the display 120 can be seen. The cooling fan starts to work. With the buttons + - the temperature can be adjusted in 20 degree steps. During the cooking the temperature can be adjusted at any time. The build in sensor keeps the temperature at about the adjusted temperature. The temperature can be adjusted from 60°C up to 240°C. When the failure code E0 is in the display then the used pot or pan is not suitable induction cookers. The appliance beeps and after ca 30 Sec the appliance will switch to the stand-by mode.

Timer

The temperature or power must be adjusted first, as described above. Touch the function button so many times, until the red LED bellow the Timer symbol is blinking. The display shows „0“. Now there is 5 seconds time to adjust the time by pressing the button + - in steps of 5 minutes. The time can be adjusted from 5 to 180min. Pressing the button - decreases the time by 5 minutes. When the + or - button is pressed one time the time increases or decreases by 5 minutes.

If you want to change the time during the cooking touch the function button until the timer LED is blinking. Now you have ca 5 seconds time to change the timer setting. When the function temperature and the timer is used and it is the intention to switch to the power mode or temperature, the function button needs to be touched as many times as both lights shine and the display shows the remaining time. When the ON/OFF button is touched during the cooking then the program will be deleted and the appliances switches to the stand-by mode. If the adjusted time runs out, the appliance will switch to the stand-by mode.

Disposal:

Packaging disposal:

Do not throw away the package materials. Please put it in the recycling bin.

PS

PP

PE

Gift box: Paper, should be put to the old paper collection point. Plastic packaging material and foils should be collected in the special collection containers.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other hold wastes throughout the EU. To prevent possible harm to the ornament or human health from uncontrolled waste disposal, recycle it

Responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Service and Repair:

If the appliance must be repaired, plaese get in touch with your trader or with the manufacturer:

1 = 500 Watt, 2 = 1050 Watt, 3 = 1200 Watt, 4 = 1350 Watt, 5 = 1400 Watt,

6 = 1550 Watt, 7 = 1650 Watt, 8 = 1750 Watt, 9 = 1850 Watt, 10 = 2000 Watt

1 = 5 0 0 Watt , 2 = 1 0 5 0 Watt , 3 = 1 2 0 0 Watt , 4 = 1 3 5 0 Watt , 5 = 1 4 0 0 Watt ,

6 = 1 5 5 0 Watt , 7 = 1 6 5 0 Watt , 8 = 1 7 5 0 Watt , 9 = 1 8 5 0 Watt , 1 0 = 2 0 0 0 Watt