AMX - DJ Equipment AKAI - Free user manual and instructions

Product Type	DJ Controller with built-in audio interface
Brand	AKAI
Model	AMX
Category	DJ Equipment
Dimensions (L x W x H)	320 x 100 x 40 mm
Weight	0.6 kg
Power Supply	USB bus power (5V)
Connectivity	USB (for computer), headphone output (3.5mm jack), master output (RCA)
Number of Channels	2
Jog Wheels	Capacitive touch with backlight
Crossfader	Yes, with adjustable curve via software
Volume Faders	2 channel level faders
Built-in Effects	Filter, echo, flanger, etc. (software controlled)
Additional Functions	Hot cues, loops, roll, sampler
Compatible Software	Serato DJ Pro and Serato DJ Lite
Maintenance and Cleaning	Wipe with a soft, dry cloth. Do not use harsh products.
Safety	Do not expose to moisture, shocks, or excessive temperature. Use with a computer that meets electrical standards.
Spare Parts	No spare parts included. For any repairs, contact an authorized AKAI technician.
Repairability	Device not repairable by user. In case of failure, consult customer service.
General Information	Portable and lightweight DJ controller, ideal for beginners and mobile DJs. Integrates a 2-input / 2-output audio interface.

Frequently Asked Questions - AMX AKAI

How to connect the AKAI AMX to my computer?

Use the supplied USB cable to connect the controller to a USB port on your computer. The power indicator lights up. Install the driver if necessary (available on the AKAI website).

Which software is compatible with the AMX?

The AKAI AMX is compatible with Serato DJ Pro and Serato DJ Lite. A Serato DJ Lite license is included with the device.

How to configure the buttons and faders?

The controls are mapped by default in Serato. You can customize the mapping via the software by accessing the MIDI control preferences.

Why do I hear no sound?

Check that the AMX is selected as the audio device in Serato preferences. Ensure that the computer and controller volume are not muted. Plug your headphones into the dedicated output.

How to update the firmware of the AMX?

Download the latest firmware from www.akaipro.com and follow the update utility instructions. Connect the device in update mode (Shift button + USB connection).

Can I use the AMX without a computer?

No, the AMX requires a computer to operate. It acts as a control surface and audio interface for DJ software.

How to clean the AKAI AMX?

Use a soft, dry cloth. For stubborn stains, lightly dampen the cloth with water. Never use solvents or abrasive products.

What to do if the crossfader is noisy or irregular?

The crossfader can be cleaned with a specific potentiometer cleaner (contact spray). If the problem persists, contact AKAI support.

Is the AMX compatible with Traktor or Virtual DJ?

The AMX is designed primarily for Serato. Although it can be recognized as a generic MIDI controller, the mapping is not optimized for other software.

How to reset the AKAI AMX?

Unplug the device, wait 10 seconds, then plug it back in. For a factory reset, hold down the Shift and Play buttons simultaneously while connecting via USB.

USER MANUAL AMX AKAI

User Guide (English)

Introduction

Box Contents

AMX

USB Cable

Software Download Card

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit akaipro.com/amx.

For additional product support, visit akaipro.com/support.

Quick Start

1. Windows users only: Install the drivers before installing the software.
2. Make sure you have already installed the latest version of Serato DJ from serato.com.
3. Make sure all devices are off and all faders and gain knobs are set to "zero."
4. Make all necessary connections in your DJ setup (e.g., controller to computer, turntables to mixer, etc.).
5. Connect AMX to your computer with a standard USB cable (included).
6. Open Serato DJ and go!

Read the rest of this User Guide to get the most out of AMX's features.

Features

1. USB Port: Use a standard USB cable to connect this USB port to your computer. The computer's USB port provides ample power to AMX. This connection is also used to send and receive MIDI data to and from your computer.

2. Master Output (RCA): Use standard RCA cables to connect this output to a speaker or amplifier system. The level of this output is controlled by the Master knob.

3. Line/Phono Inputs (RCA): Connect your audio sources to these inputs. These inputs can accept both line and phono-level signals.

4. Grounding Terminal: If using phono-level turntables with a grounding wire, connect the grounding wire to these terminals. If you experience a low "hum" or "buzz", this could mean that your turntables are not grounded. Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be connected to the grounding terminal.

5. Headphones (1/8" / 3.5 mm): Connect your 1/8" (3.5 mm) headphones to this output for cueing and mix monitoring.

6. Shift: Press and hold this button to access the secondary functions (in red lettering) of other controls on AMX.

7. Touch: Press this button to activate the functions of AMX's touch-capacitive knobs: the Channel Treble, Channel Mid, Channel Bass, and Channel Filter. When the Touch button is activated (Touch Mode), touch any of these knobs to activate or deactivate their corresponding functions momentarily.

8. Panel / View: Press this to toggle through the Recording (Rec), Effects (FX), Sampler (SP-6), and Flip panels. Press and hold Shift and then press this button to toggle through the available software display modes.

9. Search / DVS: While the track is paused, press and hold this button and turn the Browse Knob to move through the track on the corresponding deck.

During playback, press and hold this button and turn the Browse Knob to temporarily bend the pitch of the track on the corresponding deck. This does not apply when the deck's vinyl control is in Absolute Mode (ABS).

Press and hold Shift and then press this button to switch the vinyl control mode between Internal (INT) and the last-selected mode: Absolute Mode (ABS), Relative Mode (REL), or Through (THR). You must be using the Serato DVS Expansion Pack (sold separately) in order to use this function.

1. Browse Knob: Use this knob to scroll through lists of tracks, Crates, etc. in the software. You can also press it to move between the panels shown in the software.

2. Crossfader: Blends audio between the channels assigned to the left and right side of the crossfader.

3. Crossfader Curve: Adjusts the crossfader curve. Turn the knob to the left for a smooth fade (mixing) or to the right for a sharp cut (scratching). The center position is a typical setting for club performances.

4. Crossfader Reverse: Reverses the direction of the crossfader.

5. Master Volume: Adjusts the output volume of the Program Mix.

6. Cue Gain: Adjusts the volume level of the Headphones output.

7. Cue Mix: Turn to mix between Cue and Program in the Headphones output. When all the way to the left, only channels routed to Cue will be heard. When all the way to the right, only the Program mix will be heard.

8. Load 1 / Load 2: Press one of these buttons while a track is selected to assign it to Deck 1 or Deck 2, respectively.

9. LED Meters: Monitors the audio levels of the corresponding channel.

10. Line/Phono Switch: Flip this switch to the appropriate position, depending on the device connected to the Line/Phono Inputs. If you are using phono-level turntables, set this switch to Phono to provide the additional amplification needed for phono-level signals. If using a line-level device, such as a CD player or sampler, set this switch to Line.

11. Gain Trim: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the software.

If the software's vinyl control mode is set to Internal (INT), press and hold Shift and turn this knob to adjust the pitch of the track.

1. Channel Treble: Adjusts the high (treble) frequencies. When the Touch button is activated, touching this knob will mute the corresponding channel's high frequencies (an "EQ kill").

2. Channel Mid: Adjusts the mid-range frequencies. When the Touch button is activated, touching this knob will mute the corresponding channel's mid-range frequencies (an "EQ kill").

3. Channel Bass: Adjusts the low (bass) frequencies. When the Touch button is activated, touching this knob will mute the corresponding channel's low frequencies (an "EQ kill").

4. Channel Fader: Adjusts the audio level on the corresponding channel in the software.

5. PFL: Press this button to send this channel's pre-fader signal to the Cue Channel for monitoring. When engaged, the button will be lit. By pressing one PFL button at a time, you will cue that channel alone (and deactivate PFL monitoring for the other channels). To cue to multiple channels simultaneously, press the PFL buttons for those channels at the same time.

6. Play / Pause: This button pauses or resumes playback.

Press and hold Shift and then press this button to "stutter-play" the track from the last set Cue Point.

1. Cue: When the Deck is paused, you can set a Temporary Cue Point by moving the Platter to place the Audio Pointer at the desired location and then pressing the Cue Button.

During playback, you can press the Cue Button to return the track to this Temporary Cue Point. (If you did not set a Temporary Cue Point, then it will return to the beginning of the track.)

If the Deck is paused, you can press and hold the Cue Button to play the track from the Temporary Cue Point. Releasing the Cue Button will return the track to the Temporary Cue Point and pause it. To continue playback without returning to the Temporary Cue Point, press and hold the Cue Button, then press and hold the Play Button, and then release both buttons.

Press and hold Shift and then press this button to return to the beginning of the track.

1. Sync: Press this button to automatically match the corresponding Deck's tempo with the opposite Deck's tempo and phase. Press and hold Shift and press this button to deactivate Sync.

2. Channel Filter: Turn this knob to apply and adjust a low-pass filter to the corresponding channel when turned counter-clockwise or a high-pass filter when turned clockwise.

When the Touch button is activated, it will also apply a Loop Roll to the filter and will decrease in length as the knob moves further away from the center position.

Assistance technique

Technical Specifications

Connections	1 USB port2 RCA stereo (pairs) line/phono inputs1 RCA stereo (pair) master output1 1/8" (3.5 mm) TRS headphone output
Knobs	1 360° touch-capacitive encoder8 270° touch-capacitive knobs2 360° encoders3 270° knobs
Power	USB-bus-powered
Dimensions(width x depth x height)	5.2" x 10.8" x 1.9"13.3 cm x 27.4 cm x 4.8 cm
Weight	1.76 lbs.0.8 kg

Specifications are subject to change without notice.

Trademarks and Licenses

Akai Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.

Serato, Serato DJ, and the Serato logo are registered trademarks of Serato Audio Research.

All other product or company names are trademarks or registered trademarks of their respective owners.

AKAI®

PROFESSIONAL