POWX0490 - Sander PowerPlus - Free user manual and instructions

Product type	Orbital sander
Brand	PowerPlus
Model	POWX0490
Power	250 W
Variable speed	Yes, from 6,000 to 12,000 oscillations/min
Dimensions (L x W x H)	250 x 120 x 140 mm
Weight	1.5 kg
Power supply	Mains 230 V ~ 50 Hz
Sanding surface	115 x 110 mm
Paper attachment system	Velcro (self-adhesive)
Sound pressure level (LpA)	85 dB(A)
Sound power level (LwA)	96 dB(A)
Vibrations (ah)	2.5 m/s²
Main functions	Dry sanding of flat surfaces, integrated dust extraction
Maintenance and cleaning	Clean ventilation slots with a brush, replace sandpaper regularly
Safety	Unplug before any maintenance, wear safety goggles and a dust mask
Spare parts and repairability	Available: abrasive pads, switch, motor brushes
General information	Domestic use, protection class II (double insulation)

Frequently Asked Questions - POWX0490 PowerPlus

How to change the sandpaper?

Peel off the used paper and attach the new paper to the Velcro pad. Make sure the dust extraction holes match.

Can I use this sander without a dust bag?

Yes, but it is recommended to use the bag or a vacuum to reduce dust.

What is the ideal speed for sanding wood?

Set the speed between 6,000 and 8,000 oscillations/min for softwood, and up to 12,000 for hardwood.

How to clean the sander after use?

Unplug it, remove the dust bag, and clean the ventilation slots with a soft brush.

What to do if the sander does not start?

Check the power cord and fuse. If the problem persists, contact after-sales service.

Is this sander suitable for sanding walls?

Yes, for small flat surfaces. For large areas, prefer a hand sander.

How to replace the motor brushes?

Remove the motor cover, take out the old brushes and insert the new ones. Follow the installation direction.

Can I use non-PowerPlus abrasive sheets?

Yes, provided they have dimensions 115 x 110 mm and a compatible Velcro system.

What is the warranty for this sander?

The legal warranty is 2 years. Keep the receipt for any claim.

Does the sander vibrate a lot?

The vibration level is 2.5 m/s². Wear anti-vibration gloves for increased comfort.

USER MANUAL POWX0490 PowerPlus

Yellow power tool with black handle and gray top, no visible text or symbols on body

NL	NEDERLANDS	VERTAALDE VERSIE VAN DE ORIGINELE HANDLEIDING
FR	FRANÇAIS	TRADUCTION DU MODE D'EMPLOI D'ORIGINE
EN	ENGLISH	ORIGINAL INSTRUCTION MANUAL
DE	DEUTSCH	ÜBERSETZUNG DER ORIGINALBETRIEBSANLEITUNG
ES	ESPAÑOL	TRADUCCIÓN DEL MANUAL DE INSTRUCCIONES ORIGINAL
IT	ITALIANO	TRADUZIONE DEL MANUALE DI ISTRUZIONI ORIGINALE
PT	PORTUGUÊS	TRADUÇÃO DO MANUAL DE INSTRUÇÕES ORIGINAL
NO	NORSK	OVERSETTELSE AV ORIGINAL BRUKERVEILEDNING
DA	DANSK	OVERSÆTTELSE AF DEN ORIGINALE BRUGSVEJLEDNING
SV	SVENSKA	ÖVERSÄTTNING AV DEN URSPRUNGLIGA BRUKSANVISNINGEN
FI	SUOMI	ALKUPERÄISEN OHJEKIRJAN KÄÄNNÕS
EL	Ελληνικά	Μετάφραση του πρωτότυπου εγχειριδίου οδηγιών
HR	HRVATSKI	PRIJEVOD ORIGINALNOG PRIRUČNIKA S UPUTAMA ZA RAD
SR	SRPSKI	PREVOD ORIGINALNOG UPUTSTVA ZA UPOTREBU
CS	ČESKY	PŘEKLAD ORIGINÁLNÍHO NÁVODU K POUŽITÍ
SK	SLOVENČINA	PREKLAD NÁVODU NA POUŽÍVANIE Z ORIGINÁLU
RO	ROMÂNÃ	TRADUCEREA MANUALULUI DE INSTRUCTIUNI ORIGINALE
PL	POLSKI	TŁUMACZENIE ORYGINALNEJ INSTRUKCJI OBSŁUGI
HU	MAGYAR	AZ EREDETI KEZELÉSI UTASÍTÁS FORDÍTÁSA
RU	РУССКИЙ	ОРИГИНАЛЬНАЯ ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
BG	БЪЛГАРСКИ	ПРЕВОД НА ОРИГИНАЛНОТО РЪКОВОДСТВО

1 GEBRUIKSDOELEINDEN 2
2 BESCHRIJVING 2
3 INHOUD VAN DE VERPAKKING 2
4 TOELICHTING VAN DE SYMBOLEN 2
5 ALGEMENE VEILIGHEIDSVOORSCHRIFTEN ....3
5.1 Werkplaats....3
5.2 Elektrische veiligheid ....3
5.3 Veiligheid van personen....3
5.4 Zorgvuldige omgang met en gebruik van elektrisch gereedschap....4
5.5 Service....4
6 BIJKOMENDE VEILIGHEIDSINSTRUCTIES VOOR SCHUURMACHINES .... 4
7 GEBRUIK 5
7.1 In- en uitschakelen....5
7.2 Snelheidsregelaar 5
7.3 Monteren van het schuurpapier 5
7.4 Stofopvang....5
8 TECHNISCHE GEGEVENS 6
9 GELUID 6
10 REINIGING EN ONDERHOUD 6
10.1 Reiniging 6
11 SERVICEDIENST....6
12 OPSLAG....6
13 GARANTIE 7
14 MILIEU 7
15 CONFORMITEITSVERKLARING 8

DRIEHOEKSHUURMACHINE 300W POWX0490

Close-up of a black and yellow object resembling a helmet or grip, with no visible text or symbols.

Close-up of a yellow and black object with a circular opening, possibly a device or tool (no visible text or symbols)

Yellow hand tool with a sanding disc and black handle, no visible text or symbols

7.4 Stofopvang

28/06/2021, Lier - Belgium

Close-up of a yellow and black object resembling a helmet or mask, with no visible text or symbols.

Close-up of a black and yellow handheld device with a circular button (no visible text or symbols)

Yellow hand tool with a sanding disc resting on it, no visible text or symbols

28/06/2021, Lier - Belgium

1 APPLICATION....2
2 DESCRIPTION 2
3 PACKAGE CONTENT LIST....2
4 SYMBOLS 2
5 GENERAL POWER TOOL SAFETY WARNINGS ....3
5.1 Work area 3
5.2 Electrical safety....3
5.3 Personal safety .... 3
5.4 Power tool use and care....4
5.5 Service....4
6 ADDITIONAL SAFETY-HINTS FOR SANDERS 4
7 OPERATING INSTRUCTIONS ....5
7.1 Switching On-off....5
7.2 Variable speed control....5
7.3 Attaching the sandpaper 5
7.4 Collecting the dust....5
8 TECHNICAL DATA 5
9 NOISE....6
10 CLEANING AND MAINTENANCE....6
10.1 Cleaning 6
11 SERVICE DEPARTMENT 6
12 STORAGE 6
13 WARRANTY....7
14 ENVIRONMENT 7
15 DECLARATION OF CONFORMITY 8

TRIANGULAR SANDER 300W POWX0490

1 APPLICATION

The sander is intended for sanding and polishing of wood, plastic and coated surfaces. It is particularly suitable for profiles, corners or hard-to-reach areas. It is very important to use the correct sandpaper(90x90x90mm)!!!! It is not designed for commercial use.

WARNING! Read this manual and the general safety instructions carefully before using the machine, for your own safety. Your power tool should only be passed on together with these instructions.

2 DESCRIPTION

1. Sanding paper
2. Base plate

3. On/off switch

4. Speed adjustment wheel

5. Soft grip
6. Dust extractor connection

3 PACKAGE CONTENT LIST

■ Remove all packing materials
■ Remove remaining packaging and transit supports (if existing)
- Check the completeness of the packing content
- Check the appliance, the power cord, the power plug and all accessories for transportation damages.
- Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!

1pc Triangular Sander 300W

3 pcs sander paper ( 3pcs of grid 60/120 & 240)

1pc Dust extractor connection

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

	Denotes risk of personal injury or damage to the tool.		Wear eye protection
	Read manual before use		Wear gloves
	In accordance with essential requirements of the European directive(s)		"Class II - The machine is double insulated; Earthing wire is therefore not necessary

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

5.1 Work area

• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (BCD) protected supply. Use of an BCD reduces the risk of electric shock.

5.3 Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used whenever conditions require will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

5.4 Power tool use and care

- Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

- Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

- Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to stick and are easier to control.

- Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could lead to a hazardous situation.

5.5 Service

- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY-HINTS FOR SANDERS

• Always wear safety-goggles and a dust-mask during your work with the finishing-sander.
  ■ Always secure the work piece by clamps or else to avoid slipping away.
  ■ Always keep the holes in the base plate clean from dust.
  ■ Always connect a vacuum cleaner to the attached adaptor during your work.
  ■ Take special care when sanding lead based paint:

• All persons entering the work area must wear a mask specially designed for protection against lead paint dust and fumes.

• Children and pregnant women must not enter the work area.

• Do not eat, drink or smoke in the work area.

• Do not leave the tool running. Operate the tool only when hand-held.

• Ventilate your work area adequately when you perform sanding operations.
• Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage may cause a personal injury.

7 OPERATING INSTRUCTIONS

Do not sand plaster surfaces, (WARNING: In this case your guarantee becomes void) this may clog the motor (brushes, ball bearings,...).

7.1 Switching On-off

• To start the machine, press the On/Off switch forward.
• To switch the machine off, press the On/Off switch to the rear.

7.2 Variable speed control

The tool speed can be infinitely adjusted between 6000 rpm and 10000 rpm. Higher speed is obtained when the dial is turned in the direction of 6; lower speed is obtained when it is turned in the direction of 1.

Close-up of a black and yellow object resembling a helmet or device, with no visible text or symbols.

Close-up of a black and yellow electronic device with a circular button (no visible text or symbols)

7.3 Attaching the sandpaper

■ Before any work on the machine itself, pull the main plug.
- To attach sanding paper, first remove all dirt or foreign matter from the sanding base plate. Then attach the sanding paper to the sanding base plate, using the hook-and-loop system of the sanding paper and the sanding base plate.
- Make sure the perforations in the paper coincide with those on the sanding base plate, to ensure optimal dust collection.
- The sandpaper should rest flush on the base plate and must not come loose.
- Select sandpaper with the correct grain size.
- You can be sure to find the right sandpaper among our product range (see accessories).

Yellow-handled hand tool with a sanding pad and plastic cover (no text or symbols visible)

7.4 Collecting the dust

For a better dust extraction of the working surface, your sanding machine can be connected to the ordinary vacuum cleaner for house-use. Ask your vacuum cleaner distributor for the correct dust bag connector.

8 TECHNICAL DATA

Mains voltage	230-240V
Mains frequency	50Hz
Power rating	300W
No load speed	6000-11000 min ^-1
Sanding surface	90 X 90 X 90 mm
Weight	1.2 kg
Safety class	II

9 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

81 dB(A)

Acoustic power level LwA

92 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).

aw (Vibration)

9.7 m/s²

K = 1,5 ~m / s^2

10 CLEANING AND MAINTENANCE

Attention !Before performing any work on the equipment, pull the power plug.

10.1 Cleaning

• Keep the ventilation slots of the machine clean to prevent overheating of the engine.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.

11 SERVICE DEPARTMENT

• Damaged switches must be replaced by our after-sales service department.
• If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician).

12 STORAGE

• Thoroughly clean the whole machine and its accessories.
• Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low temperatures.
• Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
• Don't keep it in plastic bags to avoid humidity build-up.

13 WARRANTY

- This product is warranted for a 36-month period effective from the date of purchase by the first user.

- This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.

- Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.

- We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.

- Repairs may only be carried out by an authorised customer service centre for Powerplus tools.

- You can always obtain more information at the number 00 32 3 292 92 90.

- Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.

- At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload.

- Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive.

- Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement.

- Devices or parts which are replaced under the warranty therefore remain the property of Varo NV.

- We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).

- Your purchase receipt must be kept as proof of date of purchase.

- Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.

14 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice.

VARO N.V. - Vic. Van Rompuy N.V.- Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,

Product: Triangular Sander 300W

Trade mark: POWERplus

Model: POWX0490

is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amendments up to the date of signature);

2011/65/EU

2014/30/EU

2006/42/EC

European harmonized standards (including, if applicable, their amendments up to the date of signature);

EN62841-1 : 2015

EN62841-2-4:2014

EN55014-1 : 2017

EN55014-2:2015

EN61000-3-2:2014

EN61000-3-3:2013

Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy N.V.

The undersigned acts on behalf of the company CEO,,

Mertens Ludo

Ludo Mertens

Regulatory Affairs – Compliance Manager

28/06/2021, Lier - Belgium

Close-up of a black and yellow object resembling a helmet or mask (no text or symbols visible)

Close-up of a black and yellow electronic device with a circular button (no visible text or symbols)

Close-up of a yellow-handled hand holding a sanding tool with a red and black piece (no text or symbols visible)

28/06/2021, Lier - Belgium

Close-up of a yellow and black object with a circular opening, showing a small inset detail (no text or symbols visible)

Close-up of a car's front panel showing a yellow and black body with a circular orange button (no text or symbols visible)

Yellow-handled tool with a sanding pad and black handle, no visible text or symbols

Close-up of a black and yellow object resembling a helmet or mask, with no visible text or symbols.

Close-up of a black and yellow electronic device with a circular button and an arrow pointing to it (no visible text or symbols)

Yellow electric shaver with a sanding pad and wooden platter, no visible text or symbols

Regulatory Affairs – Compliance Manager

28/06/2021, Lier - Belgium

Close-up of a black and yellow object resembling a helmet or device (no visible text or symbols)

Close-up of a black and yellow electronic device with a circular button (no visible text or symbols)

7.3 Colocar papel lixa

Yellow power tool with a circular component and a black handle, no visible text or symbols

Close-up of a yellow and black object with a circular opening, showing a black arrow pointing to it (no text or symbols visible)

Close-up of a black and yellow electronic device with a circular button and an arrow pointing to it (no visible text or symbols)

Yellow electric shaver with a sanding tool partially visible (no text or symbols)

28/06/2021, Lier - Belgium

28/06/2021, Lier - Belgium

3 FÖRPACKNINGSINNEHÅLL

Close-up of a yellow and black handheld device with a black circular button and an arrow pointing to it (no text or symbols visible)

Close-up of a mechanical component with a yellow circular feature and a black arrow pointing to a labeled section (no text or symbols visible)

Yellow power tool with a sanding disc and black base, no visible text or symbols

7.4 Dammupptagning

Close-up of a yellow and black fitness helmet with a circular button, showing a white object (no text or symbols visible)

7.2 Nopeuden säätö

Close-up of a black and yellow mechanical component with a circular opening and an arrow pointing to it (no text or symbols visible)

7.3 Hiomapaperin asentaminen

Yellow electric shaver with a sanding pad and black plastic cover (no text or symbols visible)

7.4 Pölyn poisotto

28/06/2021, Lier - Belgium

Close-up of a yellow and black object resembling a stylized helmet or device (no text or symbols visible)

Close-up of a black and yellow electronic device with a circular button (no visible text or symbols)

Yellow electric shaver with a sanding tool partially visible (no text or symbols)

7.4 Συλλογή σκόνης

28/06/2021, Lier - Belgium

1 UREĐAJ 2
2 OPIS 2
3 POPIS SADRŽAJA PAKIRANJA 2
4 SIMBOLI 2
5 OPĆA UPOZORENJA O ELEKTRIČNIM ALATIMA....3
5.1 Područje za rad ....3
5.2 Električna sigurnost....3
5.3 Osobna sigurnost .... 3
5.4 Korištenje i održavanje električnog alata ....4
5.5 Servis....4
6 DODATNI SIGURNOSNI SAVJETI ZA BRUSILICE 4
7 UPOTREBA....5
7.1 Uključenje/lsključenje....5
7.2 Promjenjivi regulator brzine....5
7.3 Postavljanje brusnog papira 5
7.4 Prikupljanje prašine 5
8 TEHNIČKI PODACI 5
9 BUKA....6
10 ČIŠĆENJE I ODRŽAVANJE 6
10.1 Čišćenje....6
11 SERVISNI ODJEL....6
12 ČUVANJE....6
13 JAMSTVO....7
14 OKOLIŠ 7
15 IZJAVA O SUKLADNOSTI 8

TROKUTASTA BRUSILICA 300W POWX0490

1 UREĐAJ

Brusilica je namijenjena za brušenje i poliranje drvenih, plastičnih i glaziranih površina. Posebno je prikladna za rad na stranicama predmeta, uglovima ili dijelovima koji nisu lako dostupni. Iznimno je važno koristiti odgovarajući brusni papir!!!! Nije predviđena za komercijalnu upotrebu.

Close-up of a yellow and black object with a black arrow pointing to a circular opening (no text or symbols visible)

Close-up of a black and yellow object with a circular highlight and an arrow pointing to a small circular feature (no text or symbols visible)

Yellow-handled tool with a circular component and a wooden board, no visible text or symbols

7.4 Prikupljanje prašine

28/06/2021, Lier - Belgium

1 UREĐAJ 2
2 OPIS 2
3 LISTA SADRŽAJA PAKETA 2
4 SIMBOLI 2
5 OPŠTA BEZBEDNOSNA UPUTSTVA ZA ELEKTRIČNE ALATE .3
5.1 Radna oblast 3
5.2 Električna bezbednost....3
5.3 Bezbednost osoba....3
5.4 Korišćenje i održavanje električnog alata 4
5.5 Servisiranje 4
6 DODATNI BEZBEDNOSNI SAVETI ZA BRUSILICE......4
7 RUKOVANJE 5
7.1 Uključivanje-isključivanje....5
7.2 Regulator promenljive brzine....5
7.3 Pričvršćivanje brusnog papira 5
7.4 Uklanjanje prašine 5
8 TEHNIČKI PODACI 5
9 BUKA....6
10 ČIŠĆENJE I ODRŽAVANJE....6
10.1 Čišćenje....6
11 SERVISNO ODELJENJE....6
12 SKLADIŠTENJE....6
13 GARANCIJA....7
14 ŽIVOTNA SREDINA....7
15 IZJAVA O USKLAĐENOSTI....8

TROUGAONA BRUSILICA 300W POWX0490

1 UREĐAJ

Ova brusilica je namenjena za fino brušenje i poliranje drveta, plastike i prevučene površine. Naročito je pogodna sa profile, uglove i površine koji se teško dohvataju. Veoma je važna upotreba pravilnog brusnog papira!!!! Ovaj alat nije predviđen za komercijalnu upotrebu.

Close-up of a black and yellow object with a circular opening, showing a black arrow pointing to it (no text or symbols visible)

7.2 Regulator promenljive brzine

Brzina mašine se može beskonačno podešavati između 0 i 10000 o/min. Veća brzina se dobija kada se brojčanik okrene u smeru prema 6; manja brzina se dobija kada se okrene u smeru prema 1.

Close-up of a yellow and black object with a circular button and an arrow pointing to it (no visible text or symbols)

Yellow-handled tool with a sanding pad and wooden handle, no visible text or symbols

7.4 Uklanjanje prašine

Za bolje uklanjanje prašine sa radne površine, vašu brusilicu možete da priključite na običan usisivač za prašinu za kućnu upotrebu. Obratite se vašem prodavcu usisivača za prašinu za odgovarajući priključak za kesu za prašinu.

8 TEHNIČKI PODACI

Napon	300W
Frekvencija	230-240V
Snaga	50Hz
Brzina bez opterećenja	90 X 90 X 90 mm
Brusna površina	6000-11000min ^-1
Težina	1.2 kg
Klasa zaštite	II

9 BUKA

Vrednosti emisije buke u skladu sa relevantnim standardom. (K=3)

28/06/2021, Lier - Belgium

Close-up of a yellow and black object with a circular opening, showing a black arrow pointing to it (no text or symbols visible)

Close-up of a black and yellow object with a circular highlight and an arrow pointing to it (no text or symbols visible)

Yellow and black electronic device with a perforated pad, no visible text or symbols

7.4 Sběr prachu

Close-up of a yellow and black device with circular features, showing a close-up of the interior (no text or symbols visible)

Close-up of a black and yellow object with a circular highlight and an arrow pointing to it (no text or symbols visible)

Yellow and black power tool with a sanding disc, no visible text or symbols

7.4 Zber prachu

28/06/2021, Lier - Belgium

Close-up of a yellow and black object with a circular opening, showing a small arrow pointing to it (no text or symbols visible)

Close-up of a black and yellow object with a circular highlight and an arrow pointing to it (no text or symbols visible)

Yellow electric shaver with a sanding tool partially visible (no text or symbols)

28/06/2021, Lier - Belgium

Close-up of a black and yellow object resembling a helmet or mask (no text or symbols visible)

Close-up of a yellow and black object with a circular badge (no visible text or symbols)

Yellow power shaver with a sanding tool partially visible, no text or symbols present.

Close-up of a yellow and black object with a circular opening, possibly a device or tool, next to an arrow (no text or symbols visible)

Close-up of a yellow and black object with a circular opening, possibly a device or tool (no visible text or symbols)

Yellow power tool with a sanding disc and wooden handle, no visible text or symbols

7.4 Porgyújtés

28/06/2021, Lier - Belgium

Close-up of a yellow and black object with a circular opening, marked by an arrow (no text or symbols visible)

Close-up of a mechanical component with a highlighted circular feature and an arrow pointing to it (no text or symbols visible)

Yellow hand holding a sand mold with a white plastic clip, no visible text or symbols

7.4 Сбор пыли

Close-up of a yellow and black object with circular features, showing a step and directional arrows (no text or symbols)

Yellow hand tool with a red sand mold and black base, no visible text or symbols

7.4 Прахоулавяне

Yellow electric shaver with black handle and power button, no visible text or symbols

varo

WWW.VARO.COM

DESIGNED AND MARKETED BY VARO

©copyright by varo

VARO - VIC. VAN ROMPUY nv

JOSEPH VAN INSTRAAT 9 - 2500 LIER - BELGIUM

OFFICES: