HG1500 - Heat gun EARLEX - Free user manual and instructions

Product type	Heat gun
Brand	Earlex
Model	HG1500
Power	1500 W
Voltage	230 V ~ 50 Hz
Temperature range	50°C - 600°C
Airflow	300 L/min
Weight	0.8 kg
Dimensions (L x W x H)	250 x 180 x 80 mm
Cable length	2 m
Features	Variable temperature control, Overheat protection, Cool-down setting
Maintenance	Clean nozzles regularly, Keep air vents clear
Accessories	Includes 3 nozzles (concentrator, reflector, flat)
Safety	Thermal fuse, Double insulation

Frequently Asked Questions - HG1500 EARLEX

How do I adjust the temperature on the Earlex HG1500?

The temperature is controlled by a variable dial on the handle. Turn it to set the desired temperature between 50°C and 600°C.

Can I use the HG1500 for paint stripping?

Yes, it is suitable for paint stripping. Use a flat nozzle to direct heat evenly and always keep the gun moving to avoid damage.

How do I clean the heat gun?

Unplug the unit and allow it to cool completely. Wipe the exterior with a damp cloth. Clean nozzles with a brush to remove debris. Do not use abrasive cleaners.

What accessories come with the Earlex HG1500?

The package includes three nozzles: a concentrator, a reflector, and a flat nozzle. Additional accessories are available separately.

Is it safe to leave the heat gun unattended?

No, never leave the heat gun unattended while it is plugged in or still hot. Always turn it off and unplug after use.

How should I store the heat gun?

Store it in a dry place away from moisture. Allow it to cool completely, then place it in its original packaging or a protective case.

Can I use the heat gun on plastic materials?

Yes, but use a low temperature setting (below 200°C) and keep the gun moving to prevent melting or warping.

What is the maximum temperature of the HG1500?

The maximum temperature is 600°C. Use this setting only for tasks like soldering or metal work.

How do I change the nozzle?

First, ensure the gun is cool and unplugged. Then, push and twist the nozzle to remove it. Attach the new nozzle by pushing and twisting until it clicks.

Why does my heat gun stop working suddenly?

This may be due to overheating protection. Let the gun cool down for 15 minutes and try again. If the problem persists, check the power cord and fuse.

USER MANUAL HG1500 EARLEX

Product photo of a Earlex electric tool with various accessories and tools (no visible text or symbols)

Thank you for purchasing the Earlex heat gun. This is a highly versatile tool that can be used in a variety of applications.

BEFORE USE - PLEASE READ THE SAFETY & OPERATING INSTRUCTIONS

Please retain for future reference Please register your product at www.earlex.com

SAFETY OPERATING INSTRUCTIONS

PLEASE READ BEFORE USE DO NOT

• Touch the nozzle.
• Change/rotate the nozzle while the unit turned on.
• Leave the heat gun unattended when it switched on.
• Allow children to operate or play with heat gun.
• Carry the heat gun by the power cable.
• Allow heat to be directed onto the pot cable.
  • Use the heat gun as a hair dryer.
• Restrict air flow from the nozzle outlet fan inlets.
• Allow the heat gun to become damp of operated in damp conditions.
• Use the heat gun close to inflammable materials because heat may be conduc to combustible materials which are out sight.
• Apply to the same place for a long ti
  • Under any circumstances aim the heat at another person or animal.
• Use when explosive vapor or dust is air.

Danger of burns - We recommend wearing a pair of heavy grade, non PVC type work gloves. Danger of fire or explosion if the appliance is not used with care.

- When changing the nozzle, switch off a allow the accessory and nozzle to cool.

• After use stand the heat gun up vertically their safety.

(on its rear end) and allow to completely cool down.

• A hot nozzle can cause damage.
• Is Before every use check the condition of the plug and cable. If these are damaged, it isn any way do not use. Repairs must be carried out by a fully qualified electrician.
  the Always ensure there is adequate ventilation as gases and vapors may be given off when stripping paint. Ensure that overprotective goggles and masks are used.
• Poisonous or inflammable gases may be produced when working with paints or (especially older type lead paints), varnishes, plastics and similar materials.
• Ensure the heat gun switch is in the center off position when connecting to the power supply. ed Ensure children and pets are kept away of from the work area.
• It is recommended that a suitable circuit me.breaker to UL489 is fitted between the
  gupower supply and product for added protection against electric shock.
  this product is intended for 'household' use only.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
  andor instruction concerning use of the appliance by a person responsible for
  allytheir safety.

Thermal cut out – This heat gun is fitted with a self resettable thermal cut-out. If you find the fan is on but the heating element is off, hold the gun away from the work piece and allow fan to cool the element. The heat gun should reset in approx. 1min.

TECHNICAL SPECIFICATION

Power supply 120V\~ 60Hz

Max. output 1500 Watts

Temp at outlet Position 1) 660°F Position 2) 1110°F

Weight (excl. nozzles) 750g

*MAX. temperatures achieved with concentrator nozzle.

ABOUT THE HG1500

The HG1500 is a highly versatile electric heat gun which can be used for many different applications, such as:

• Removal of paint
  • Defrosting metal water pipes
• Forming and welding plastic
  • Heat shrinking tubing
• Soldering

TO OBTAIN THE BEST RESULTS FROM YOUR HEAT GUN PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE.

HEAT SETTINGS

The heat gun has two settings:

1. Low heat (switch down) - for us where the work surface or surroundings must not be allowed get too hot. Setting\~660°F.
2. High heat (switch up) - for faster heat up time of the work surface where you can also operate the gun at a greater distance. Setting\~1110°F.

OPERATION

Before starting work it is advisable to the work surface for the ideal temperature to. The table below gives an indication of the heat settings required but always start with low heat setting. All applications, with the exception of removing paint from window frames, can be performed without using nozzle, however for best results nozzles recommended.

Suggested Ratings

Low High
Welding plastic Paint stripping
Bending plastic Defrosting pipes
Heat shrinking plastic	Removing vinyl floor tiles
	Soldering
	Lighting BBQs

Nozzles

The gun is supplied with four different nozzles, which can be used as follows:

Concentrator nozzle G84

• Directs a concentrated heat flow to the work surface.
• Ideal for removing paint in awkward corners, crevices, mouldings, beading or architraves.

Glass protection nozzle - G89

• Deflects the heat away from glass or other fragile areas.
• Ideal for windowsills ledges, frames and base boards.

Hook nozzle - G87

• Disperses the heat flow evenly around the whole work surface.
• Ideal for defrosting frozen pipes, soldering pipe work, bending plastics or heat shrinking electrical insulating tubing.

Deflector nozzle - G88

test Directs a long, narrow to use at pattern to the

e likely surface.

with ideal for removing paint e or varnish from large, flat surfaces such as a base boards, doors, arestairs etc.

• It should be used in conjunction with a flat scraper.
• Vinyl tiles can be removed by softening the tile and adhesive.

Removing paint - general

Do not heat the paint for too long as this will burn the paint, making it difficult to remove.

1. Choose the required nozzle and fit onto the heat outlet.
   2.Hold the gun with nozzle approximately 50mm (2") from surface of the paintwork.
2. Starting with the low heat setting, move the gun slowly backwards and forwards until the paint blisters and bubbles.

shapedmediately remove the paint with a scraper or shavehook.

5.Aim to heat the paint just ahead of the scraper so that you can develop a continuous action.

Removing paint from window frames

WARNING – Glass can break easily when heated.

1. Use the glass protection nozzle.

2. Ensure the nozzle is facing the correct way to deflect heat away from the glass before you switch on the heat gun.

3. Rotate the gun/nozzle 90° as you move to horizontal or vertical bead (take care it could be hot!).
4. Paint can be removed by using a shavehook and/or a soft wire brush.

Maintenance

Always allow the machine to cool down (before storing) and disconnect from the power supply. The heat gun should be cleaned before being stored away by wiping over with a clean damp cloth. DO NOT USE CHEMICALS. Ensure that the ventilation slots are not blocked.

Trouble Shooting

If a problem occurs always switch off the unit immediately and disconnect from power supply.

My unit fails to work?

If you are using an extension cable it must be fully unwound and rated at 15 amps capacity. Refer to 'Thermal cut out' on page 2.

WARRANTY

This product is guaranteed for a period of 24 months against faulty materials and workmanship. While every possible care is taken by Earlex to ensure that our products leave the factory in good working order. Earlex cannot under any circumstances accept liability for problems or damage caused by their subsequent use. It is the responsibility of the user to ensure that surfaces to be treated, cleaned or stripped are suitable for this product. This warranty does not affect your statutory rights. This warranty excludes the use for hire purposes. In the event of a fault occurring please contact our herpline before returning the unit to our Service Department at the address below together with a copy of your purchase receipt. All repairs will be dealt with promptly.

IF YOU REQUIRE FURTHER ASSISTANCE PLEASE CONTACT OUR HELPLINE ON:

Tel: [phone] email: [e-mail]

Intertek 3115903

CONFORMS TO UL STD.499 CERTIFIED TO CSA STD. C22.2 NO.122

Earlexreservestherighttomodifyorimprovethisproductwithoutpriornotice.

Colorsmayvaryfromthoseshown.

For information on other products in the Earlex range, please contact us at the address below or visit by website at: www.earlex.com

©Earlex Inc. 2011

Earlex Inc.

8261 Highway 73, Suite F,

Stanley, N.C. 28164, USA

Earlex Inc, Toll Free 888-783-2612

Email: [e-mail] Website: www.earlex.com

G135 07/11