SCF250 - Food Warmer PHILIPS - Free user manual and instructions

Product type	Bottle and jar warmer
Brand	Philips
Model	SCF250
Dimensions (L x W x H)	12 x 12 x 15 cm
Weight	0.5 kg
Power supply	220-240 V, 50-60 Hz
Power	200 W
Capacity	1 bottle or jar
Heating time	Approximately 4 to 6 minutes
Keep warm function	Yes, up to 30 minutes
Automatic shut-off	Yes
Overheat protection	Yes
Material	Heat-resistant plastic
Color	White with blue accents
Cleaning	Exterior: damp cloth. Reservoir: regular descaling with vinegar
Spare parts	Removable basket, lid
Repairability	Repairability index: 6.9/10
Box contents	Warmer, basket, lid, instruction manual
Warranty	2 years

Frequently Asked Questions - SCF250 PHILIPS

How to use the Philips SCF250 bottle warmer?

Fill the reservoir with water up to the mark, place the bottle or jar in the basket, then close the lid. Plug in the appliance and turn the adjustment knob to select the appropriate heating time. The appliance will shut off automatically.

What types of bottles can be heated?

All standard glass or plastic bottles compatible with the supplied basket. Do not use stainless steel bottles.

Can you heat glass jars?

Yes, place the jar directly in the basket. Make sure the jar is not cracked and remove the metal lid before heating.

How to clean my Philips SCF250 bottle warmer?

Unplug the appliance and let it cool down. Clean the exterior with a damp cloth. For the reservoir, descale with diluted white vinegar (1 part vinegar to 2 parts water) once a month.

The warmer stops before the heating is complete. What to do?

Check the water level: it must be sufficient. If the problem persists, perform descaling. The automatic shut-off may activate if the internal temperature is too high (overheat protection).

Can I leave water in the reservoir after use?

It is recommended to empty the reservoir after each use to prevent limescale build-up and bacterial growth.

How long does it take to warm a bottle?

The heating time varies depending on the amount and initial temperature. Generally, allow 4 to 6 minutes for a 200 ml bottle at room temperature.

The indicator light does not turn on. What to do?

Check the electrical outlet and connection. If the light remains off, contact Philips customer service.

Can I heat frozen breast milk?

Yes, first thaw the milk in the refrigerator, then warm it like a fresh bottle. Do not heat frozen milk directly.

Where can I find spare parts for the SCF250?

Spare parts (basket, lid) are available on the official Philips website or from authorized dealers. Use the reference numbers indicated in the manual.

USER MANUAL SCF250 PHILIPS

White Philips baby care appliance with control knob (no visible text or symbols on body)

Black-and-white photo of a woman holding a baby, both looking at each other (no text or symbols visible)

PHILIPS

	20°C/10°C	10ml/20ml
	20°C	10ml
	20°C	10ml
	20°C	10ml
	10°C	20ml
	10°C	20ml
	10°C	20ml
	Max. 1 hr.

10ml =

20ml =

Close-up of a camera lens with adjustment knobs and a circular dial (no text or symbols visible)

Functional Overview - Product illustration on inside flap

① Bottle and jar lifter
② Hand grips
③ Mains plug
④ Click-step control knob
⑤ Indicator lamp
⑥ Ring with water cup
⑦ Container
⑧ Cable reservoir

Important Safeguards

• Read and save these instructions
• Never use the unit without water in it.
• Do not touch hot surfaces. Use handles or grips.
• Do not move an appliance containing hot liquids.
• Do not immerse appliance, cord or plugs in water or other liquid.
• Close supervision is necessary when the unit is used near children.
• Do not let cord hang over edge of table or counter.
• Do not place on hot surfaces or in a heated oven.
• Test food on inside of hand before serving to ensure it is at a safe temperature for your baby.
• Use only containers that have been approved for boiling.
• Only use the Baby Bottle Warmer when the ambient temperature is between +7^ and +37^ .

Installation

Before connecting the Baby Bottle Warmer to the mains, check to ensure that the mains outlet is 230V AC.

1 Place the Baby Bottle Warmer out of the reach of children and on a dry, non-slip, horizontal surface.
2 Turn the click-step control knob ④ to the left to the ‘●’ (OFF) position.

The indicator lamp lights green.

3 Unreel the required cable length from the cable reservoir ⑧ and plug into the mains outlet.

Operation

Warming of baby bottles

1 Turn the click-step control knob ④ to the left to the ‘●’ (OFF) position.
2 Connect the bottle warmer to the mains socket.

The indicator lamp lights green.

3 Fill the beaker with 10 or 20ml water by using the water cup of the ring ⑥. The content is depending on the bottle filling and start temperature (see Heating Overview on page 3).
4 Place the bottle in the middle of the beaker and put the ring ⑥ on top of it.
5 Use the click-step control knob ④ to set the correct setting (see Heating Overview on page 3).

The indicator lamp lights red.
When the right temperature is reached the indicator lamp will light green.

6 Remove the bottle from the container and turn the control knob to the ‘●’ (OFF) position.

ENGLISH6

7 Shake the bottle a little bit to distribute the heat evenly before you allow your baby to drink.
8 Check that the contents of the bottle are the correct temperature by pouring a few drops on the back of your hand.

Notes!

• The ring ensures that the hot steam heats up the bottle extremely fast to the right temperature. Warming the bottle without the ring, might result in a wrong temperature, therefore never use the bottle warmer without the ring.
• The dimensions of the bottle or the material of the bottle (glass in stead of plastic) may influence selecting the correct knob setting. Therefore always control the end temperature and adjust the setting of the knob.

Warning! When you leave the bottle in the bottle warmer after it is heated up, the temperature might increase a few degrees.

Warming baby food jars

1 Turn the click-step control knob ④ to the left to the ‘●’ (OFF) position.
2 Connect the bottle warmer to the mains socket.

The indicator lamp lights green.

3 Remove the label and lid from the jar.
4 Fill the beaker with 20ml water by using the water cup of the ring.
5 Place the jar in the middle of the container and put the ring on top of it.
6 Set the click-step control knob to the symbol.

The indicator lamp lights red.

When the right temperature is reached the indicator lamp will light green.

7 Remove the jar from the container and turn the control knob to the left to the '●' (OFF) position.
8 Stir the contents of the jar to distribute the heat.
9 Always check that the contents of the jar are at the correct temperature by testing some on the back of your hand or via your mouth.
10 If the temperature is much too low, fill the beaker again with 10ml. Turn the click-step control knob ④ to the right until the indicator lamp lights up red to start the heating up again.

Note! The ring ensures that the hot steam heats up the jar extremely fast to the right temperature. Warming the jar without the ring, might result in a wrong temperature, therefore never use the bottle warmer without the ring.

Keeping warm

With the Baby Bottle Warmer you can also keep the bottles and jars warm for a short time.

To do this set the control knob to the symbol. Do not add water. The thermostat ensures that the set temperature is maintained. For microbiological and hygienic reasons baby food should never be kept warm for longer than one hour.

Note! Never hold the Baby Bottle Warmer in your hands when in use.

Maintenance

Cleaning

- Disconnect the Baby Bottle Warmer from the mains socket and allow it to cool down. Clean the container and the outside of the Baby Bottle Warmer with a damp cloth.

Notes: – Never immerse the Baby Bottle Warmer in water. – Do not use cleaning or scouring agents.

Warning: If a fault occurs, consult a Philips' service centre. Under no circumstances should you try to repair the Bottle Warmer yourself; do not dismantle. Servicing should be performed by qualified service personnel only.

Technical Specifications

Power supply (mains): 220-240V AC

Power consumption (mains): 250 Watts

Operational ambient temperature: between +7°C and +37°C

Protection: PTC temperature controlled

heating system

Problem solving

Problem	Solution
Temperature too low.	Turn the click-step control knob 4 to the right until the indicator lamp lights up red to start the heating up again.Check ring filling and start temperature.
Temperature too high.	Lower the adjustment setting.Check ring filling and start temperature.
The jar has not been Stir the contents from time to time heated correctly. while heating. Check that the click-step control knob is in the position.
Unit does not warm up. Wait 15 minutes between consecutive uses to allow the safety cut-out to reset.
The indicator light This is normal; it may turn on or off switches on and off while heating. while keeping warm.
Indicator light does not Shield indicator from ambient light seem to light. to improve visibility.
The bottom of the tank Hard water deposits are normal is spotted. and may increase if your water is very hard; remove the deposits periodically with white vinegar (see maintenance).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Fonctionnement -

Consumo energia (rete): 250 Watt

Specifications are subject to change without notice.

Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

2005 © Koninklijke Philips Electronics N.V. All rights reserved.

www.philips.com