KN-WS200 - Clock KONIG - Free user manual and instructions

Product type	Clock
Brand	Konig
Model	KN-WS200
Dimensions (approx.)	10 x 10 x 5 cm
Weight (approx.)	200 g
Power supply	2 AA batteries (not included) or mains adapter (optional)
Display	Digital LED/LCD display
Main functions	Time display, alarm, date, temperature, backlight
Alarm	Alarm with snooze function
Time setting	Manual via buttons
Usage	Indoor
Care and cleaning	Wipe with a soft, dry cloth. Do not use abrasive cleaners.
Safety	Do not expose to water or excessive humidity
Required batteries	2 x AA (LR6)
Spare parts and repairability	Replaceable batteries. No spare parts available. Device not user-serviceable.
General information	Digital clock from the Konig brand, model KN-WS200. User manual downloadable in PDF format.

Frequently Asked Questions - KN-WS200 KONIG

How to set the time on the Konig KN-WS200 clock?

Press the 'TIME' or 'SET' button until the numbers flash, then use the '+' and '-' buttons to adjust. Confirm by pressing 'SET' again.

How to set the alarm?

Press 'ALARM' to enter setup mode. Use the same buttons to set the alarm time. Activate it by toggling the switch or pressing 'ALARM ON/OFF'.

What to do if the display is dim?

Check the batteries: replace them if they are weak. If the device is mains-powered, ensure the adapter is properly plugged in.

How to use the snooze function?

When the alarm sounds, press the 'SNOOZE' button (usually the same as 'LIGHT' or a dedicated button) to postpone the alarm for 5 to 10 minutes.

Can I use the clock without batteries?

Yes, if you use a mains adapter (not included). The clock will work without batteries, but time and alarm memory will be lost in case of power outage.

How to turn off the alarm?

Press the 'ALARM OFF' button or hold down the 'ALARM' button until the alarm icon disappears from the screen.

Does the clock display the temperature?

Yes, most KN-WS200 models have a built-in ambient temperature sensor. The temperature is usually displayed in degrees Celsius.

How to change the temperature unit?

Look for a '°C/°F' button or hold down a dedicated button to switch between Celsius and Fahrenheit. Refer to the manual for the exact model.

What to do if the clock does not turn on?

Check the batteries (correct orientation) or the mains adapter. If the problem persists, reset the device by removing the batteries and unplugging the adapter for 30 seconds.

Where to download the full manual?

The manual is available for free in PDF format on notice-facile.com for the Konig KN-WS200 reference.

USER MANUAL KN-WS200 KONIG

KN-WS200

MANUAL (p. 2)

RADIO-CONTROLLED CLOCK

MODE D'EMPLOI (p. 11)

HORLOGE RADIO-COMMANDÉE

MANUALE (p. 21)

OROLOGIO RADIOCONTROLLATO

HASZNÁLATI ÚTMUTATÓ (30. o.)

RÁDIÓVEZÉRELT ÓRA

MANUAL DE USO (p. 25)

RELOJ CONTROLADO POR RADIO

KÄYTTÖOHJE (s. 35)

1. Radio-controlled function in DCF format
2. Weather forecast for 4 states: sunny, semi-sunny, cloudy, rainy
3. Indoor trend indication of temperature/humidity
4. indication of the comfort index
5. Temperature detect range: -20°C \~ 50°C
6. Humidity detect range : 10% RH \~ 95% RH
7. Alarm, snooze (delay 5 minutes alarm)
8. Day of the week in 7 languages
9. LED backlight
10. DST-Daylight saving time
11. Moon phase
12. Word time zone set, -12/+12 hours

B. Power on & Reset

1. While Power-On or reset, the LCD is completely lit for 3 seconds, and after the beep, RCC receiving mode is activated.

C. Instruction of operating the keys

1. Key functions: Eight functional keys: CLOCK; ALARM; UP; DOWN; 12/24; MAX/MIN; SNZ/LIGHT; C/F.

Operation\Function		CLOCK ALARM UP DOWN SNZ LIGHT 12/24 C/F MAX/MIN
Standard mode	Click	----	Alarm on/off	----	----	Backlight on	12/24 switchable	°C /°F switch	Display MAX/MIN Temperature and humidity
	Hold	Enter time setting	Enter Alarm Setting	----	Enter RCC state forcefully	----	----	Clear Max/min Temperature and humidity
Time set	Click Conf i rm The setting		---- One step forward		One step backward	Backlight on ----	----	----
	Hold	----	----	8steps/second forward	8steps/second backward	----	----	----	----
Alarm set	Click	----	Confirm the setting	One step forward	One step backward	Backlight on ----	----	----
	Hold	----	----	8steps/second forward	8steps/second backward	----	----	----	----

2. Standard mode key operation:

a. Hold CLOCK 2 seconds, enter time setting.
b. Press ALARM, turn alarm on/off.
c. Hold ALARM 2 seconds, enter alarm setting.
d. Press 12/24 to switch 12/24HR under time set mode.
e. Press C/F to switch °C/°F.
f. Press SNZ/LIGHT to turn on backlight 5 seconds.
g. When the alarm activates, press SNZ/LIGHT key. Don't press any key, the Snooze function will activate and repeat four times.
h. Press "down" key for 3 seconds to enter into RCC receiving mode.
i. Press "MAX/MIN" key to check maximal and minimum of temperature and humidity.
j. Hold "MAX/MIN" key 2 seconds to clear all record of temperature and humidity

k. Under the RCC receiving mode, press "DOWN" key 2 seconds to exit the RCC receiving mode.

3. Time setting:

a. Hold CLOCK 2 seconds, enter time setting mode.

b. Setting sequence is: Year → Month → Date → Language → Hour → Minute → exit

c. Push CLOCK key to confirm current setting and enter next setting

d. Click UP key, the setting will go ahead one step; Hold this key 2 seconds, the setting will run forward by 8 steps/second.

e. Click DOWN key, the setting will backward for one step; Hold this key, the setting will run back by 8 steps/second.

f. The system will exit automatically if no key is operated in 20 seconds.

4. Alarm setting:

a. Hold ALARM 2 seconds to enter alarm setting.

b. Setting sequence is : hour → minute → exit.

c. Click ALARM to confirm setting and enter next setting state.

d. Click UP key, the setting will go ahead one step; Hold this key 2 seconds, the setting will run forward by 8 steps/second.

e. Click DOWN key, the setting will backward for one step; Hold this key, the setting will run back by 8 steps/second.

f. The system will save the setting and exit automatically if no key is operated in 20 seconds.

D. Function and effect

1. RCC receiving function:

a. How to enter RCC receiving status.

I. It will into RCC receiving state automatically when power on or resetting.

II. It enters RCC receiving automatically at 2:00, 3:00, 4:00, 5:00 everyday.

b. RCC receiving time is 7 minutes.

c. It will receive radio signal automatically at 1:00-3:00 am, if it doesn't receive radio signal it will start receiving at 4:00 and 5:00, if the signal has been received then the next RCC receiving time is 1:00 am next day.

d. If can't receive radio signal during 1:00 to 5:00, then next RCC receiving time is 1:00 next day.

e. If the alarm rings during RCC receiving, system will exit RCC receiving and enter alarm function.

f. When the DST signal is received, the DST symbol on the LCD will light, and the setting is changed into daylight saving time.

g. If you change the time setting when the RCC symbol is lit, all the RCC symbols on the display will be switched off.

2. Alarm function:

a. the BUZZER will ring for 2 seconds as below:

0 – 10 sec.: one "beep" per second

10 – 20 sec.: two "beeps" per second

20 - 30 sec.: four "beeps" per second

after 30 sec.: "beeps" continuously

b. When ringing, click SNZ/LIGHT key once to enter states 5 minutes snooze states, exit if any other key is pushed.

1. System will stop temperature detection when RCC receiving or alarm ringing.

2. The indoor temperature display range: 0°C -- +50°C (32F -- +122F)

3. The indoor temperature proposed operating range: 0°C -- +40°C (32F -- +104F)

4. The indoor humidity range: 20% --- 95%

5. Sampling period: 15 seconds.

6. Temperature between 20°C-26°C (68°F-78.8°F), humidity between 40%-70% RH, LCD will display "COM".
7. In any temperature, humidity over 70%, LCD will display "WET".
8. In any temperature, humidity below 40%, LCD will display "DRY".
9. Temperature below 20°C or over 26°C, humidity between 40%-70%RH, comfort signal on LCD will not display anything.

E. The function of weather forecast

Weather icons for 4 states: sunny → semi-sunny → cloudy → rainy

Declaration of conformity

We,

Nedis B.V.

De Tweeling 28

Declare that product:

Name: KÖNIG

Model: KN-WS200

Description: Radio controlled clock

Is in conformity with the following standards

EMC: EN61000-6-3 : 2007

EN61000-6-1:2007

Following the provisions of the 89/336/EEC directive.

's-Hertogenbosch, 2008, March 04

Mrs. J. Gilad

Purchase Director

Safety precautions:

To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other

equipment if a problem should occur. Do not expose the product to water or moisture.

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.

Warranty:

No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product.

General:

Designs and specifications are subject to change without notice.

All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such.

Attention:

This product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collections system for these products.

Copyright ©

CE

DEUTSCH

A. Hauptfunktion:

Declaration of conformity

We,

Nedis B.V.

De Tweeling 28

Declare that product:

Name: KÖNIG

Model: KN-WS200

Description: Radio controlled clock

Is in conformity with the following standards

EMC: EN61000-6-3 :2007

EN61000-6-1:2007

Following the provisions of the 89/336/EEC directive.

's-Hertogenbosch, 2008, March 04

Mrs. J. Gilad

Purchase Director