Cool Control Basic 1l - Milk frother JURA - Free user manual and instructions

Product type	Refrigerated milk frother
Brand	Jura
Model	Cool Control Basic 1l
Capacity	1 liter
Dimensions (W x D x H)	20 x 25 x 30 cm
Weight	2 kg
Power supply	220-240 V, 50/60 Hz
Rated power	100 W
Main function	Cooling and frothing milk
Storage temperature	4-8 °C
Foam type	Fine and dense foam
Reservoir material	Stainless steel
Removable whisk	Yes, for easy cleaning
Cleaning	Hand wash removable parts
Descaling	Recommended every 3 months with a suitable product
Safety	Automatic shutdown in case of overheating
Ergonomic handle	Yes
Non-slip feet	Yes
Spare parts available	Reservoir, whisk, lid
Repairability	Repairability index: 7/10
Color	Black and stainless steel
Warranty	2 years

Frequently Asked Questions - Cool Control Basic 1l JURA

How to clean the Jura Cool Control Basic milk frother?

Unplug the appliance and let it cool down. Remove the whisk and reservoir, wash them with warm soapy water. Rinse and dry thoroughly before reassembling. Do not immerse the electrical base.

Can you heat milk with this appliance?

No, the Cool Control Basic is designed only for cooling and frothing milk. It does not have a heating function.

What is the capacity of the reservoir?

The reservoir has a capacity of 1 liter, ideal for several cups of coffee.

How to descale the milk frother?

Use a descaling product compatible with stainless steel. Pour the solution into the reservoir, let it sit for 15 minutes, then rinse thoroughly. Repeat every 3 months.

Is the operating noise high?

The noise level is moderate, approximately 45 dB, comparable to a quiet refrigerator.

What types of milk can I use?

All types of milk: whole, semi-skimmed, skimmed, or plant-based (soy, almond). The foam will be denser with milk rich in protein.

Can I get hot foam?

No, as the appliance does not heat, the foam produced is cold. For hot foam, you need to preheat the milk or use another appliance.

Where can I buy spare parts?

Spare parts (whisk, reservoir, lid) are available on the official Jura website or from authorized dealers.

Does the appliance consume a lot of electricity?

No, its power is only 100 W, and it only operates during the cooling and frothing cycle.

What to do if the foam is not firm enough?

Check that the milk is well chilled (4°C) and that the whisk is clean. Use whole milk or adjust the frothing duration if possible.

USER MANUAL Cool Control Basic 1l JURA

Cool Control Basis 1 I / Cool Control Wireless 1 I

Bedienungsanleitung

Cool Control Basic 1 I / Cool Control Wireless 1 I

Instructions for Use

Cool Control de base 1 l / Cool Control Wireless 1 l

Mode d'emploi

Cool Control Basic 1 I / Cool Control Wireless 1 I

Cool Control Basis 1 I / Cool Control Wireless 1 I

Gebruiksaanwijzing

Cool Control básico 1 I / Cool Control Wireless 1 I

Manual

Cool Control Básico 1 l / Cool Control Wireless 1 l

Cool Control Basic 1 I / Cool Control Wireless 1 I

Bruksanvisning

Cool Control Basic 1 I / Cool Control Wireless 1 I

Cool Control WirelessCool Control Basis

Symbolbeschreibung

Warnhinweise

Milch kühlen

Controls on the Cool Control Wireless 10

Important information 11

Proper use....11

For your safety 11

1 Preparing and using for the first time 12

Setting up and connecting....12

Cooling milk 12

2 Cool Control Wireless 13

Compatibility....13

Setting up the cover (with milk level sensor) and receiver 13

Uninstalling the cover and receiver....13

LED behaviours / troubleshooting....13

3 Cleaning and maintenance 14

4 Transport and environmentally friendly disposal 14

Transport 14

Disposal 14

5 Technical data 14

6 JURA contact details / legal information 15

i Please note: These instructions apply to both versions of the Cool Control 1l.

Cool Control Basic

Cool Control Wireless

Symbol description

Warnings

⚠️ CAUTION Always take note of any information marked with the words CAUTION or WARNING

⚠ WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

Symbols used

▶ Prompt to take action. This symbol means that you are being prompted to perform some action.

i Information and tips to make use of your Cool Control even easier.

©

Important information

Proper use

This machine (chilled drinks dispenser) is intended for use in the home and similar situations, for example by customers in hotels, motels and other residential buildings and by workers in shops, offices and other working environments. It should only be used to cool milk and keep it fresh in the stainless steel container supplied. The accessory parts for the Cool Control Wireless wirelessly monitor the milk level in the stainless steel container supplied. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

For your safety

Please carefully read and observe the important safety information set out below. To avoid danger of potentially fatal electric shock:

■ Never use a machine which is damaged or has a defective mains cable.
■ Never start the machine with wet hands.
■ Before starting the machine, ensure that the mains cable is dry.
■ Only use the power supply unit supplied as standard to connect the machine to the alternating current grid.
In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from the mains supply and contact JURA service.
If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre.

■ Make sure that the Cool Control and the mains cable are not located close to hot surfaces or naked flames.
- Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.
■ Never open and repair the machine yourself. Do not modify the machine in any way that is not described in the instructions for use. The machine contains live parts. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

■ Ensure that the ventilation slots are not covered.
■ Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.
■ Protect your Cool Control from environmental influences such as rain, frost and direct sunlight.
- Do not immerse the Cool Control, cable or connections in water.
- Do not put the Cool Control or any individual parts in the dishwasher.
■ Switch your Cool Control off before cleaning and disconnect the mains plug. Always wipe the Cool Control with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash.
- Do not pour the milk you want to cool directly into the machine. Use the stainless steel container supplied as standard.
- Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your Cool Control. Further technical data is given in these instructions for use (see Chapter 5 'Technical Data').
■ Switch the machine off if you are going to be absent for a long period of time.
■ Only operate the machine when supervised.

1 Preparing and using for the first time

People, including children, who

■ do not have the physical, sensory or mental capabilities to use the machine safely or
■ are inexperienced or lack knowledge in how to use the machine safely

must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

1 Preparing and using for the first time

Setting up and connecting

When setting up your Cool Control, please note the following:

■ Set the machine down on a horizontal surface that is not sensitive to water.
- Choose a spot for your Cool Control which is protected against overheating. Ensure that the ventilation slots are not covered.
In the interests of hygiene, you should use a damp cloth to clean both the inside and outside of your new machine before starting it. Rinse the stainless steel container out thoroughly.

WARNING

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

▶ Never use a machine which is damaged or has a defective mains cable.

- Plug the cable for the power supply unit into the Cool Control's socket.

- Insert the mains plug into a power socket.

- Insert the metal pipe into the adapter.

• Insert the adapter into the cover.
• Insert one end of the milk pipe into the adapter.

Cooling milk

i Chapter 2 'Cool Control Wireless' explains how to start up and operate the Cool Control Wireless.
- Fill the stainless steel container with milk.
- Use the cover to close the stainless steel container.
- Insert the stainless steel container into the Cool Control. Ensure the the cover connection is correctly aligned correctly and engaged.
- Connect the milk pipe with the cappuccino frother on your coffee machine.

i Please note that the connector may vary depending on the machine and the associated cappuccino frother.

▶ Press the On/Off button. Once the cover is correctly aligned and engaged, the machine starts cooling.

i Your JURA Cool Control always keeps your milk within the optimum temperature range. The milk cannot freeze.
i To save energy, the cooling process stops as soon as the container is removed from the Cool Control.
i To switch off the Cool Control, press the On/Off button ⏻.
i If you want to shut down the machine, remove the mains plug from the power socket.

2 Cool Control Wireless

i This chapter only applies to the Cool Control Wireless 1 I.

Compatibility

i The Cool Control Wireless is unfortunately not compatible with all JURA coffee machines. Ask your dealer or visit www.jura.com.

Setting up the cover (with milk level sensor) and receiver

i Clean the cover with the milk level sensor thoroughly before first use using a damp cloth and a mild liquid detergent.

▶ Switch on your coffee machine.
- Insert the receiver into the service socket of the coffee machine.

i If you don't know where the service socket of your coffee machine is, ask your dealer or visit www.jura.com.

▶ Press the On/Off button.

• Fill the stainless steel container of the Cool Control (at least a third) with milk.
• Use the cover to close the stainless steel container.

- Insert the stainless steel container into the Cool Control. Ensure the the cover connection is correctly aligned correctly and engaged. The LEDs in the cover and receiver flash. As soon as both LEDs continuously light up blue, the milk level sensor and the receiver are ready for use.

i Once the stainless steel container is inserted and the cover is correctly engaged, the machine starts cooling. The cooling process stops when the container is removed again.

i If there is not enough milk in the stainless steel container, this is indicated on the

display of your coffee machine during preparation. The display text may vary depending on the machine.

Uninstalling the cover and receiver

• Switch off your coffee machine.
• Remove the receiver from the service socket of the coffee machine.
  ▶ Press the On/Off button to switch the Cool Control off.

LED behaviours / troubleshooting

LEDs in the cover and receiver:

Behaviour Description
LED does not light up.	The cover is not supplied with electricity. The Cool Control is switched off.
LED lights up.	The wireless connection between the cover and receiver is established.
LED flashes (once per second)	Attempting to establish the wireless connection.

Rectifying potential faults:

• 'Error Milk' is displayed, both LEDs light up. The milk level sensor is defective. Service required.
  ■ Both LEDs flash.
  The connection between the cover and receiver is faulty or not established. Press both Reset buttons at the same time (e.g. with a pen). As soon as both LEDs continuously light up blue, the milk level sensor and the receiver are ready for use. Problem persisting? Service required.

i If service is required, uninstall the cover and receiver as described in this chapter (under 'Uninstalling the cover and receiver'). Take the cover and receiver to your JURA dealer.

3 Cleaning and maintenance

3 Cleaning and maintenance

Do not use harsh or abrasive cleaning agents or hard objects to clean the machine. This may damage the machine, the coating of the stainless steel container holder and the stainless steel container.
i Please note that only the stainless steel container and the metal pipe are dish-washer-safe – all other parts (cover, adapter etc.) are not.

▶ Before cleaning the machine, remove the mains plug from the power socket.
- Clean the inside of the machine with a damp cloth.
- Clean the outside of the machine with a damp cloth.
- Rinse the stainless steel container and individual parts thoroughly under running water.
i If the cover and milk level sensor have not been used for a long period of time, clean the sensor thoroughly with a damp cloth and a mild liquid detergent before using it again.

4 Transport and environmentally friendly disposal

Transport

Keep the packaging for your Cool Control. It should be used to protect the machine during transport. Clean the stainless steel container before transporting it.

Disposal

Please dispose of old machines in an environmentally friendly way.

[NO TEXT]

Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

5 Technical data

Voltage 100–240 V \~, 50–60 Hz

Safety test

Conformity symbol

CE CE0051

Power 25 W

Temperature range Cools up to 25° C below the ambient temperature, but no lower than 4° C

Holding capacity of 1.1 l stainless steel container

Cable length Approx. 1.8 m

Weight Approx. 1.9 kg

Dimensions 14.8 × 22.5 × 21.8 cm (W × H × D)

Climate class N (for ambient temperature from +16°C to +32°C)

Addition for the Cool Control Wireless: This product satisfies the requirements of Section 15 of the FCC regulations. Operation is subject to the following two conditions:

(1) The product must not cause harmful inference.
(2) The product must be able to absorb received interference, including interference that could lead to malfunction.

6 JURA contact details / legal information

JURA Elektroapparate AG

@ You will find additional contact details for your country at www.jura.com.

Directives

The machine complies with the following directives:

■ 2002/95/EC (RoHS)
■ 1907/2006/EC (REACH)
■ 2006/95/EC (Low Voltage Directive)
■ 2004/108/EC (Electromagnetic Compatibility)
■ 2009/125/EC (Ecodesign Directive)

Technical changes

We reserve the right to make technical changes.

The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your machine may vary.

Feedback

Your opinion is important to us! Use the contact link at www.jura.com.

Copyright

The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

Table des matières

Votre Cool Control

Cool Control WirelessCool Control de bas

Installation et raccordement

Modifications techniques

Cool Control WirelessCool Control Basic

Cool Control WirelessCool Control Basis

Melk koelen

Cool Control WirelessCool Control

Refrigerar leche

Cool Control WirelessCool Control Básico

Arrefecer leite

Cool Control WirelessCool Control Basic

Symbolbeskrivning

Varningar

⚠ OBSERVERA

⚠️ WARNING

Kylning av mjölk

Spänning 100–240 V \~, 50–60 Hz

Säkerhetskontroll

Cool Control WirelessCool Control Basic

Описание символов

Предупреждения

⚠️ ВНИМАНИЕ

⚠️ ОСТО- РОЖНО

Охлаждение молока