HD4917 - Cooker PHILIPS - Free user manual and instructions

Product Type	Portable Induction Cooker
Brand	Philips
Model	HD4917
Dimensions (W x D x H)	28 x 36 x 6 cm
Weight	2.5 kg
Power Consumption	2000 W
Voltage / Frequency	220-240 V / 50-60 Hz
Cooking Zones	1 (induction)
Control Type	Touch + Digital Display
Power Levels	10
Timer	Up to 3 hours
Auto Shut-Off	Yes (with no pan or overheat)
Child Lock	Yes
Pan Detection	Automatic
Materials	Ceramic glass top, ABS plastic body
Cleaning	Wipe with damp cloth; do not immerse
Safety Features	Overheat protection, auto shut-off, pan detection
Spare Parts Availability	Power cord, control board (contact service)
Repairability Index	7/10 (common parts available)
Certifications	CE, RoHS

Frequently Asked Questions - HD4917 PHILIPS

What type of cookware is suitable for the Philips HD4917 induction cooker?

Use pots and pans made of magnetic materials such as cast iron, stainless steel with a magnetic base, or enameled iron. To test, see if a magnet sticks to the bottom.

How do I clean the induction surface?

Allow the surface to cool completely. Wipe with a soft damp cloth and mild detergent. Do not use abrasive cleaners or immerse in water.

Why does the cooker turn off automatically?

The cooker has automatic shut-off features: if no pan is detected, if it overheats, or if the timer ends. This is a safety mechanism.

Can I use glass or ceramic cookware?

No, glass and ceramic are not magnetic and will not work on induction cookers. Only use cookware with a ferromagnetic base.

How do I activate the child lock?

Press and hold the child lock button (usually a key icon) for 3 seconds. To deactivate, press and hold again.

What do the error codes mean?

Common errors: E0 (no pan), E1 (low voltage), E2 (high voltage), E3 (overheat sensor). Refer to the manual for full list.

Is the Philips HD4917 energy efficient?

Yes, induction cooking is highly efficient (about 90% energy transfer) compared to gas or electric, reducing cooking time and power consumption.

Can I use a pan larger than the cooking zone?

It is recommended to use a pan with a base diameter between 12 cm and 26 cm. Larger pans may not heat evenly.

How long is the warranty?

Philips typically offers a 2-year warranty for this model. Check your local warranty card or Philips website.

What should I do if the touch controls are unresponsive?

Ensure the control panel is clean and dry. If unresponsive, unplug for 1 minute and reconnect. If issue persists, contact Philips support.

USER MANUAL HD4917 PHILIPS

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

The induction cooker works on the basis of an electromagnet that creates a powerful, high-frequency electromagnetic field. When cookware consisting of magnetic material (e.g. iron) is placed on the induction cooker, the electromagnetic field transfers energy to the bottom of the cookware, which causes the cookware and the food inside it to become hot. The amount of heat generated in the cookware is controlled by varying the strength of the electromagnetic field. When the strength of the electromagnetic field is changed, the temperature of the cookware changes instantly.

Advantages of the induction cooker:

• Safe: the induction cooker does not make use of an open flame or fire. It also has a number of safety features, which allow you to enjoy cooking with your family whenever you want.
• Fast: in induction cooking, the cookware serves as the heat source. This results in much faster and more even heat transfer, shortening the cooking time by more than 1/3 compared to conventional cooking.
• Versatile: the induction cooker has 7 preset cooking modes, each with its own optimal heating pattern. These modes allow you to prepare a great variety of nutritious meals.
• Very user friendly: the simple and interactive control panel and display allow you to easily adjust the settings at the touch of a button.
• Comfortable: the induction cooking process is smoke-free and produces less grease. Moreover, the cooker and the surrounding area stay cool. This allows you to cook in a cool and comfortable environment.
• Portable: the induction cooker has a compact design and the cooking plate stays cool. This means the appliance is always safe to use and allows you to cook anywhere in your home.

General description (Fig. 1)

A Crystalite cooking plate
B Body
C Cooking zone
D Control panel
E Display
F Air outlet
G Air inlet
H Mains cord

Control panel

1 Preset cooking modes with indicator lights
2 Hr:Min button (cooking time)
3 Timer button
4 Display
5 Power level/cooking temperature indication
6 +/- buttons (for setting cooking time, power level and cooking temperature)
7 Start button
8 Power on/off button

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

- Never immerse the appliance in water or rinse it under the tap.

Warning

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• Only connect the appliance to an earthed wall socket. Always make sure the plug is inserted firmly into the socket.
• Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep the mains cord out of the reach of children. Do not let the mains cord hang over the edge of the table or worktop on which the appliance stands.
• Make sure the cooking plate is clean and dry before you switch on the appliance.
• Do not cover the air vent while the induction cooker is operating.
• Do not plug in the appliance or operate the control panel with wet hands.
• Do not touch the cooking plate after cooking, as it retains heat from the cookware.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the cooking plate since they can get hot.
• Do not cover any part of the cooking plate with aluminium to prevent the risk of electric shock, short circuiting or fire.
• If the surface of the cooking plate is cracked, switch off the appliance and do not use it anymore to prevent the risk of electric shock, short circuiting or fire.

Caution

• Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• Do not expose the induction cooker to high temperatures, hot gas, steam or damp heat. Do not place the induction cooker on or near an operating or still hot stove or cooker.
• Always switch off the appliance before you unplug it.
• Always unplug the appliance and let it cool down before you clean it.

- This appliance is intended for household use only. If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to the instructions in the user manual, the guarantee becomes invalid and Philips will not accept liability for any damage caused.

- Place the induction cooker on a stable, horizontal and level surface and make sure there is at least 10cm free space around it to prevent overheating.

- Do not place anything between the cookware and the cooking plate.

- The maximum weight that can be put on the induction cooker is 7kg.

- Beware of hot steam that comes out of the cookware during cooking or when you remove the lid.

- Do not lift and move the induction cooker while it is operating.

- Never put empty cookware on the switched-on induction cooker, as this could cause the cookware to become distorted or the heating coil to become damaged.

- Do not store flammable materials and liquids near or on the induction cooker.

- Avoid hard contact between the cookware or other objects and the crystalite cooking plate.

- Always place the cookware on the cooking zone during cooking.

- Never connect this appliance to a timer switch or remote control system in order to avoid a hazardous situation.

- Do not use cookware with a bottom diameter of more than 16cm to deep-fry food, as this causes the appliance to malfunction.

Automatic shut-off

The appliance is equipped with automatic shut-off. It switches off automatically in two situations:

- In the Quick start (manual) mode and the Hot pot mode, the appliance switches off automatically if you do not press any button for 60 minutes.

- If there is no cookware or unsuitable cookware on the cooking place when you press the start button or if you remove cookware from the cooking plate during cooking, the cooker beeps continuously, the display shows ‘----’. The cooker automatically switches off after 1 minute unless you put the cookware back onto the cooking plate within this minute.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Before first use

Remove all packaging material from the induction cooker.

Preparing for use

1 Place the appliance on a dry, stable and level surface.
2 Make sure there is at least 10cm free space around the appliance to prevent overheating.
3 Always place the cookware on the cooking zone during cooking.
4 Make sure you use cookware of the correct type and size (see the tables below).

Recommended types and sizes of cookware

Suitable cookware for the induction cooker

Material Cookware with a bottom made of iron or magnetic stainless steel

Shape Cookware with a flat bottom

Size Cookware with a bottom diameter of 12-22cm, depending on the cooking mode (see tips below)

Weight Cookware with a weight of up to 7kg (including contents)

Cookware NOT suitable for the induction cooker

Material Cookware with a bottom made of non-iron metal, crystalite, glass, aluminium and copper

Shape Cookware with a concave or convex bottom

Size Cookware with a bottom diameter of less than 11cm

Weight Cookware with a weight over 7kg (including contents)

Tip: When you cook in the Quick start (manual) mode or Hot Pot mode, you can use cookware with a bottom diameter of 12-25cm.

Tip: To deep-fry food, we advise you to use cookware with a bottom diameter of 12-16cm.

Using the appliance

Only use cookware that is suitable for induction cooking (see chapter 'Preparing for use').

Note: Always place and use the appliance on a dry, stable and level surface.

The tables below shows the default settings in the different cooking modes and to what extent these default settings can be adjusted.

Default and adjustable settings

Mode Default	cooking time	Power (watt)/ temperature (°C) range	Adjustable cooking time	Timer Display indications
Quick start (manual) cooking	5 400-2000W	5-60 - Power level
				Remaining cooking time (if cooking time is set)
Hot pot - 400-2000W - - Power level
Stew 60 400-1400W	30-180 up to		12hrs	Remaining cooking time
Soup/Congee	60 400-1400W	30-180 up to		Remaining cooking time
			12hrs
Steam	15	2000W	10-40	up to 12hrs
Stir fry	30 80-240°C	5-60 - Temperature
Boil	9 2000W	5-30 - Remaining cooking		time
Keep warm	30 80°C	15-180 - Remaining warming		time

Note: In the Stew and Soup/Congee modes, the appliance first brings the food to the boil and then switches to a lower power level. You can only adjust the power level after the boiling stage.

Note: The Steam mode allows you to steam various types of food, such as steamed rolls, egg, pork ribs or chicken.

Note: The Boil mode allows you to boil water or food in a fast way. The suggested boiling time for 1 litre is 3-5 minutes, for 2 litres 6-10 minutes and for 3 litres 9-14 minutes.

Power/temperature settings

Low Mid High

Wattage (W) 400 800 1200 1400 1600 1800 2000

Temperature 80 120 160 180 200 220 240

(°C)

Quick start cooking (manual mode)

1 Put the mains plug in the wall socket.

The appliance produces a 2-second beep.
The display shows ‘----’ (Fig. 2).

2 Place the cookware on the cooking zone.
3 Press the Power on/off button once to switch on the appliance (Fig. 3).

The power-on light and the 'W' light go on. The display shows the default setting of 1400W (Fig. 4).
4 If you want to adjust the power level, press the + and - buttons (Fig. 5).

Note: You can also adjust the power level during cooking.

5 If you want to adjust the cooking time: (Fig. 6)

• Press the Hr:Min button.
• Adjust the time with the + and - buttons. (Fig. 7)

Note: When you press the + and - buttons briefly, the time increases or decreases by 1 minute. When you press the buttons longer, the time increases or decreases by 5 minutes.

Note: You can also adjust the cooking time during cooking.

6 Press the Start button to start cooking (Fig. 8).

If you have not set a cooking time and/or power level, the appliance starts cooking at the default settings (a cooking time of 5 minutes and a power level of 1400W).

The appliance starts cooking.

During cooking, the fan switches on to keep the appliance cool. When you switch off the appliance, the fan remains on for approx. 1 minute and then switches off automatically.
During cooking, the display shows the power level (Fig. 9).
If you have set a cooking time, the display shows the remaining cooking time (Fig. 10).
When the cooking time has elapsed, the appliance beeps a few times.

The appliance automatically switches off and the power-on light goes out.

Note: If you want to stop cooking, press the Power on/off button. The appliance then switches off.

7 Unplug the appliance after cooking.

Using the preset cooking modes

You can choose between 7 preset cooking modes.

1 Put the mains plug in the wall socket and press the Power on/off button to switch on the appliance. (Fig. 11)
The power-on light and the 'W' light go on. The display shows the default setting of 1400W. (Fig. 4)
2 Press the button of the preset mode you want to use.

Note: Before you press the Start button to confirm the selected mode, you can still switch to any other preset mode. If you want to switch to a different preset mode after you have pressed the start button, you have to switch off the appliance by pressing the Power on/off button. Then press the Power on/off button again to switch the appliance back on and select the desired preset mode.

The indicator light above the button goes on (Fig. 12).

3 If you want to start cooking at the default setting of the selected preset mode, continue with step 6.

See the default settings and cooking time table above for the default settings in the different cooking modes.

4 If you want to adjust the power level or cooking temperature, press the + and - buttons. (Fig. 7)

- If the power level is adjustable, 'W' light goes on and the power level flashes. (Fig. 9)

- If the temperature is adjustable, 'C' light goes on. (Fig. 13)

Certain settings cannot be adjusted. See the table above for information about the settings that can or cannot be adjusted in the preset modes.

Note: You can also adjust the power level or cooking temperature during cooking.

5 If you want to adjust the cooking time: (Fig. 14)

- Press the Hr:Min button.

- Adjust the time with the + and - buttons. (Fig. 7)

Note: When you press the + and - buttons briefly, the time increases or decreases by 1 minute. When you press the buttons longer, the time increases or decreases by 5 minutes.

Note: You can also adjust the cooking time during cooking.

6 Press the Start button (Fig. 8).

The induction cooker automatically starts operating according to the selected mode.
During cooking, the fan switches on to keep the appliance cool. When you switch off the appliance, the fan remains on for approx. 1 minute and then switches off automatically.
The display shows the remaining cooking time (Fig. 10).

When the cooking time has elapsed, the appliance beeps a few times.

The appliance automatically switches off and the power-on light goes out.

Note: If you want to stop cooking, press the Power on/off button. The appliance then switches off.

Using the timer

You can use the Timer button to set the time at which you want the appliance to start cooking at a preset cooking mode.

For example: if it is 14:00 hours and you want the appliance to start cooking at 18:00 hours, set the timer to 4.00 (4 hours) and press the Start button. After 4 hours, at 18:00 hours, the appliance automatically starts cooking.

You can use the timer function for the Stew, Soup/Congee, Steam modes.

You can set a start time of 5 minutes to 12 hours.

1 Follow steps 1 to 5 of section 'Using the preset cooking modes'.
2 Press the Timer button (Fig. 15).
3 Press the + and - buttons to set the number of minutes or hours after which you want the appliance to start cooking (Fig. 7).

Note: Press the + or - button briefly to increase or decrease the time in steps of 5 minutes. When you press the + or - button longer, the time increases or decreases in steps of 1 hour.

4 Press the Start button to start the timer (Fig. 8).

The timer light goes on.

ENGLISH12

The display starts to count down the time.

When the cooking process starts, the timer light goes out and the display shows that the cooking process has started.

Cleaning and maintenance

Cleaning

Never immerse the appliance in water nor rinse it under the tap.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Do not put vinegar on the crystalite cooking plate.

1 Unplug the appliance and let it cool down.
2 Clean the appliance with a damp cloth and if necessary, with some mild cleaning agent.

Maintenance

Improper use can lead to scratches on the cooking plate. To avoid discolouring and scratches, use the appliance according to the instructions in this user manual and always clean the appliance and cookware properly after use.

Storage

Do not place heavy objects on the crystalite cooking plate as it is breakable.

Do not store the appliance in a hot place, for example near a cooker.

If you are not going to use the appliance for a longer period of time, we advise you to store the appliance in a dry and safe place.

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 16).

Guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting

If your induction cooker does not function properly or if the cooking quality is insufficient, consult the table below. If you are unable to solve the problem, contact a Philips service centre or the Customer Care Centre in your country.

Problem Solution

The power-on light does not go on.	There is a connection problem. Check if the induction cooker is connected to the mains and if the plug is inserted firmly into the wall socket
	The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.
When I press the cooking mode button, the on-light of the selected mode does not go on.	The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.
The Hr:Min light does not go on when I set the cooking time.	You have selected the Hot pot cooking mode. You can only adjust the cooking time in the Quick start (manual) mode and in the preset Stew, Soup/Congee, Steam, Stir fry, Boil and Keep warm cooking modes.
	The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.
The timer light does not go on when I set the timer.	You have selected the Quick start (manual) mode or the preset Hot pot, Stir fry, Boil or Keep warm cooking mode. You can only use the timer in the Stew, Soup/Congee, Steam cooking modes (see the 'Default and adjustable settings' table in chapter 'Using the appliance').
	The light is defective. Take the appliance to your Philips dealer or a service centre authorised by Philips.
I cannot change the power setting before I select the Stew mode or Soup/Congee mode.	In the Stew and Soup/Congee modes, the appliance first brings the food to the boil and then switches to a lower power level. You can only adjust the power level after the boiling stage.
The appliance beeps continuously.	You have put unsuitable cookware on the cooking plate or you have removed the cookware from the cooking plate during cooking. Place suitable cookware on the cooking plate.
The maximum power setting for certain cooking modes is very low.	In the Stew and Soup/Congee modes, the appliance first brings the food to the boil and then switches to a lower power level. You can only adjust the power level after the boiling stage.
I cannot switch to a different cooking mode during cooking.	You cannot switch to a different cooking mode during cooking. If you want to select a different cooking mode, press the Power on/off button to switch off the cooker. Then press the Power on/off button again to switch the cooker back on.

Problem Solution

The fan works but the appliance has not started cooking. You have to press the Start button within 1 minute after you press the Power on/off button. If you do not press the Start button within 1 minute, the induction cooker switches off and the fan continues to work for 1 minute to cool down the appliance.

Codes on the display Message What you should do

---- There is no cookware on the cooking plate or the cookware is not suitable for the induction cooker. Place suitable cookware on the cooking plate.

E1 Unstable voltage in power supply network Check if the voltage in your home is suitable for the induction cooker.

E2 The cooking plate has overheated. Switch off the appliance and unplug it. Let it cool down for approx. 10 minutes and then switch on the appliance again.

E3 The appliance malfunctions Take the appliance to a Philips dealer or a service centre authorised by Philips.

E4 The appliance has overheated Check if the air outlet is covered. If so, remove the object covering the air outlet and let the appliance cool down. Then switch on the appliance again.

If the air outlet is not covered, check if the fan works. Switch on the appliance and press the Start button. If the fan does not work, take the appliance to your Philips dealer or a service centre authorised by Philips.

Recipes

Chinese-style soup

Preparation time: 3 hours

Ingredients:

• 300g chicken
• 1 carrot
• 2 potatoes
• 1 onion
• 2ltr water

1 Put all ingredients in the cookware in the same order as described above.
2 Put the lid on the cookware.
3 Place the cookware on the cooker and boil the soup in the Soup mode (see chapter ‘Using the appliance’, section ‘Using the preset cooking modes’.

Pork rib stew with mushrooms

Preparation time: 1 hour

Ingredients:

- 800g pork ribs

- 8 chinese dried mushrooms

1 Soak the dried mushrooms for 30 minutes before you use them. Set them aside to drain for a few seconds.
2 Cut the pork ribs into pieces of about 5cm.
3 Put the oil in the cookware and heat it slightly. Add the pork pieces.
4 Add soy sauce, salt, sugar and mushrooms.
5 Add the water and cook in the Stew mode (see chapter ‘Using the appliance’, section ‘Using the preset cooking modes’).
6 Cook the pork ribs until the meat is tender and the sauce is glazed.

Pengenalan

Tahniah atas pembelian anda dan selamat datang ke Philips! Untuk mendapat manfaat sepenuhnya daripada sokongan yang ditawarkan oleh Philips, daftarkan produk anda di www.philips.com/welcome.

Symbol of a trash bin crossed with no visible text or labels