Salon Airstylist Control Airstyler HP4653 - Hair Straightener PHILIPS - Free user manual and instructions

Product Type	Hair Straightener
Brand	Philips
Model	Salon Airstylist Control Airstyler HP4653
Dimensions	30 x 3.5 x 4.5 cm
Weight	0.3 kg
Power	45 W
Voltage	110-240 V, 50-60 Hz
Temperature Range	130-230 °C
Temperature Settings	5 levels with digital display
Plate Material	Ceramic with titanium coating
Ionic Technology	Yes, to reduce frizz
Swivel Cord	1.8 m
Auto Shut-Off	After 60 minutes
Heat-Up Time	60 seconds
Worldwide Voltage	Yes, auto voltage
Accessories	Heat-resistant storage pouch
Cleaning	Wipe plates with damp cloth after unplugging and cooling
Safety	Auto shut-off, heat-resistant tip
Spare Parts	Not available separately
Reparability	Repair not recommended by user; contact Philips service

Frequently Asked Questions - Salon Airstylist Control Airstyler HP4653 PHILIPS

What is the maximum temperature of the Philips HP4653 straightener?

The maximum temperature is 230°C, adjustable in 5 levels for different hair types.

How long does it take to heat up?

It heats up in about 60 seconds, with a ready indicator light.

Does it have ionic technology?

Yes, it releases negative ions to reduce frizz and static for smoother hair.

Can I use it on wet hair?

No, always use on dry hair to avoid damage. Towel-dry and fully dry before use.

How do I clean the plates?

Unplug and let cool. Wipe plates with a damp cloth. Do not use abrasive cleaners.

Does it have an automatic shut-off?

Yes, it turns off automatically after 60 minutes for safety.

What is the warranty period?

Philips offers a 2-year warranty from purchase date. Keep receipt.

Can I use it worldwide?

Yes, it has auto voltage (110-240V) and comes with a swivel cord. You may need a plug adapter.

What should I do if the straightener stops working?

Check power cord and outlet. If still not working, contact Philips customer service. Do not open the device.

Are replacement plates available?

No, the plates are not replaceable. If damaged, consider replacing the unit. Contact Philips for options.

USER MANUAL Salon Airstylist Control Airstyler HP4653 PHILIPS

Register your product and get support at www.philips.com/welcome

HP4653/01

Product photo of a Philips airainer with two different designs (no text or symbols visible)

PHILIPS

Diagram of a folded panel with grid patterns and directional arrows indicating movement (no text or symbols)

ENGLISH 6

INDONESIA 13

한국어 20

BAHASA MELAYU 27

ภาษาไทย 35

TIÊNG VIÊT 40

繁體中文 47

简体中文 53

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

This new Philips Airstylist has been specially designed to give beautiful styling results in a quick and easy way.

General description (Fig. 1)

A Retractable bristle brush
B Mixed bristle brush
C Large vent brush
D Release button
E Slide
- = off
- I = gentle, warm airflow for easy styling
- ll = stronger and warmer airflow for fast styling
F Air inlet grille
G Hanging loop

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

• Keep the appliance away from water. Do not use it near or over water contained in baths, washbasins, sinks etc. When you use the appliance in a bathroom, unplug it after use. The proximity of water presents a risk, even when the appliance is switched off.
• Do not insert metal objects into the air inlet grille to avoid electric shock.

Warning

• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.

• Check the condition of the mains cord regularly. Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.

• If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Caution

• For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice.
• The attachments become hot during use. Prevent contact with the skin.
• Never block the air inlet grille.
• If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch the appliance back on, check the grilles to make sure they are not blocked by fluff, hair, etc.
• Always unplug the appliance after use.
• Wait until the appliance has cooled down before you store it.
• Always switch off the appliance before you put it down, even if it is only for a moment.
• Do not wind the mains cord round the appliance.
• Do not use the appliance on artificial hair.
• Do not use the appliance for any other purpose than described in this manual.
• Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• Keep the attachments clean and free of dust, dirt and styling products such as mousse, spray and gel.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Preparing for use

Hair

Do not use the appliance on wet hair, dry your hair with a towel first. The Salon Airstylist is most effective on towel-dry hair.

1 Comb or brush the hair so that it is untangled and smooth.
2 Use a comb to divide the hair into locks.

Do not put too much hair in one lock.

Connecting and disconnecting attachments

Do not insert the mains plug into the wall socket until after you have connected the attachment.

1 Connect the attachment to the stylist by aligning the arrows on the attachment with the arrows on the stylist and pressing the attachment home ('click') (Fig. 2).
2 To remove the attachment from the appliance, press the release button (1) and pull the attachment in the direction of the arrow (2). (Fig. 3)

Using the appliance

Making curls

We advise you to perform a curl test to determine how long the brush should be held in your hair to achieve a good result. Start with 8 to 10 seconds. You may have to hold the brush in your hair longer for tighter curls. Less tight curls will require less than 8 seconds.

1 Snap the retractable bristle brush onto the appliance (see chapter ‘Preparing for use’).
2 Divide the hair into locks.
3 Take a lock of hair and wind it round the brush. Make sure the end of the lock is wound in the required direction.

• Do not wind too much hair round the brush at a time.
• Do not wind a lock of hair more than twice round the brush.
• The thinner the lock of hair, the tighter the curl will be.

• Make sure the lock of hair is in contact with the barrel of the brush.
  If you wind the hair at right angles to the scalp, you will give your hair optimum lift and volume.
  4 Switch the appliance on by selecting the preferred setting: (Fig. 4)

• I: gentle airflow for easy styling

• ll: warm airflow for fast styling
  5 Keep the brush in your hair until the hair is warm to the touch.
  6 Switch the appliance off and remove the brush from your hair by pressing the bristle retraction knob and turning it in the direction of the arrows. (Fig. 5)
  7 Let the curls cool down before combing, brushing or finger-combing the hair to finish your style.
  8 When you have finished curling, switch the appliance off and remove the brush (see chapter ‘Preparing for use’).

Making shiny loose curls in short and medium-length hair

1 Snap the mixed bristle brush onto the appliance (see chapter 'Preparing for use').

2 Divide the hair into locks.

3 Take a lock of hair and wind it round the brush. Make sure the end of the lock is wound in the required direction.

If you wind the hair at right angles to the scalp, you will give your hair optimum lift and volume.

ENGLISH10

4 Switch the appliance on by selecting setting I or II.
5 Keep the brush in your hair until the hair is warm to the touch.
6 Switch the appliance off and remove the brush from your hair by unwinding the lock when you have finished curling it. To make sure the brush does not get tangled in the hair, you shouldn't wind the lock more than twice around the brush.
7 Let the curls cool down before combing, brushing or finger-combing the hair to finish your style.
8 When you have finished curling, switch the appliance off and remove the brush (see chapter ‘Preparing for use’).

Volume and shine

1 Snap the large vent brush onto the appliance to give your hair maximum volume and shine.
For long-lasting results, you can apply some mousse before styling your hair.
2 Place the brush in the hair.
3 Switch the appliance on by selecting setting I or II.
4 Move the brush against the direction of hair growth towards your scalp until the brush pins touch your scalp
5 Then move the brush away from your head while turning the brush. The hair will be lifted and will fall lightly back onto the head.
6 When you have finished styling your hair, switch the appliance off and remove the brush (see chapter ‘Preparing for use’).

Cleaning

1 Always unplug the appliance before cleaning it.

Never rinse the appliance with water.

2 Put the appliance in a safe place and let it cool down.
3 Clean the appliance with a small brush or a dry cloth.

Storage

1 Always unplug the appliance before storing it.
2 Do not wind the mains cord round the appliance.
3 Put the appliance in a safe place and let it cool down.
4 The appliance can be stored by hanging it from its hanging loop (Fig. 6).

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 7).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

If problems should arise with the appliance and you are unable to solve them by means of the troubleshooting guide below, please contact the nearest Philips service centre or the Philips Customer Care Centre in you country.

Problem Solution

The appliance does not work at all.

Perhaps the power supply is not working or the socket to which the appliance has been connected is not live. Check if the power supply is working. If it is, check whether the socket is live by plugging in another appliance.

Problem Solution

Perhaps you failed to switch the appliance on. Make sure the appliance is plugged in. Then switch it on by selecting the preferred setting.

The appliance may have overheated and switched itself off. Unplug the appliance and let it cool down for a few minutes before you switch it on again.

The appliance may not be suitable for the voltage to which it has been connected. Make sure that the voltage selector has been set to the local mains voltage.

If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.

Pendahuluan

Diagram showing a medical or anatomical structure with a blue arrow indicating direction, no text or symbols present.

Illustration of a medical or surgical tool interacting with a device (no text or symbols visible)