IKE 178-6 - Refrigerator Küppersbusch - Free user manual and instructions

Product type	Built-in refrigerator
Brand	Küppersbusch
Model	IKE 178-6
Height (cm)	177,5
Width (cm)	55,6
Depth (cm)	54,8
Net weight (kg)	62
Energy class	A++
Annual consumption (kWh)	180
Noise level (dB)	38
Gross refrigerator capacity (L)	280
Gross freezer capacity (L)	0
Control type	Electronic
Permissible ambient temperature	10 °C to 43 °C
Defrost	Automatic (No Frost)
Reversible door	Yes
Interior lighting	LED
Number of shelves	4
Number of door racks	3
Power supply	220-240 V, 50 Hz
Maintenance and cleaning	Use a soft cloth and soapy water. Do not use abrasive products.
Child safety	No
Spare parts	Available from the manufacturer
Repairability index	7,8 / 10

Frequently Asked Questions - IKE 178-6 Küppersbusch

How to set the temperature of my Küppersbusch IKE 178-6 refrigerator?

Use the thermostat adjustment knob inside the refrigerator. Turn it to a higher number for more intense cold (usually 1-5). Position 3 is recommended for normal use.

What to do if the refrigerator is no longer cooling?

First check the power supply and the plug. Make sure the thermostat is not set to '0'. Clean the condenser on the back if dusty. If the problem persists, contact an authorized technician.

How to defrost the IKE 178-6 refrigerator?

This model is equipped with the No Frost system, which means it is not necessary to defrost manually. Defrosting is automatic.

How to clean the interior of the refrigerator?

Unplug the appliance. Remove all food. Clean the surfaces with a soft cloth soaked in warm water and mild dish soap. Rinse and dry thoroughly before plugging back in.

Can I reverse the door opening direction?

Yes, the door is reversible. Follow the instructions in the user manual: disassemble the hinges, turn the door around, and reassemble them on the other side.

What does the beep sound of my refrigerator mean?

The beep sound may indicate an anomaly: door not properly closed, temperature too high, or breakdown. Consult the manual to identify the error code and the action to take.

How to save energy with my refrigerator?

Place the appliance in a cool and well-ventilated area. Do not put hot food inside. Ensure the door seals are in good condition. Defrost regularly if the model is not No Frost.

Does the IKE 178-6 refrigerator have a freezer compartment?

No, this model is a single refrigerator without a freezer compartment. It is designed only for positive cold storage.

How to change the light bulb?

The lighting is integrated LED and cannot be replaced by the user. If the LED no longer works, contact after-sales service.

Where to find the serial number and manufacturing date?

The serial number (E-Nr.) and manufacturing date are on the rating plate located inside the refrigerator, usually on the left wall or at the top.

USER MANUAL IKE 178-6 Küppersbusch

Instructions for use

Important: Read these instructions carefully and then store them in a safe place

Integrated refrigerator

Illustration of a hand inserting a black arrow into a filing cabinet (no text or symbols)

Line drawing of a hand holding a shelf with a small object, no text or symbols present

Diagram of a door with two compartments and directional arrows indicating flow or movement (no text or symbols)

Diagram of a double door with a vertical double-headed arrow and a small lamp on the floor (no text or symbols)

Technical diagram of a mechanical device with an inset showing a cylindrical component and an upward arrow (no text or symbols)

Diagram of a device with arrows indicating direction, no text or symbols present

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Safety Instructions

Please read these operating instructions carefully before installing the appliance. These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. If you are unsure about the meaning of these warnings contact the Customer Care Department.

Domestic Use

• The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.
• Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.
• This appliance is heavy. The edges and projecting parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.
• Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
• Ensure that the appliance does not stand on the electrical supply cable.
• Do not use electrical appliances inside the appliance.

• Do not keep carbonated drinks or bottles in the freezer compartment. The glass bottles may break.

• Ice lollies can cause 'frost/freezer burns' if consumed straight from the freezer.

• It is dangerous to try and alter the specifications or modify this product in any way.
• Under no circumstances should you attempt to repair the appliance yourself. Refer to your local Service Centre, and always insist on genuine spare parts.

Child Safety

• This appliance is designed to be operated by adults only. There is a risk of suffocation! Keep packaging material away from children!
• In case of disposal of the appliance, cut off the supply cable as close as possible and make the lock unusable, to prevent children from closing themselves inside the appliances.

Environment Protection

- This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.

Contents

Safety Instructions 10

Disposal 11

Use and Control Before Use / Control panel 11

Refrigerator compartment - Starting the appliance / Temperature control / Internal parts / Hints .....12

Freezer compartment - Temperature control / Interior accessories / Hints 13

Maintenance Defrosting / Cleaning / Changing the light bulb 14

Something not Working 15

Customer Service and Spare Parts 15

Technical Specifications....15

Installation Positioning / Electrical connection .....16

Building-in 17

Disposal

Appliance Packaging Information

- The materials used on this appliance marked with the symbol are recyclable.

PE<=polyethylene

PS<=polystyrene

PP<=polypropylene

All materials are environmentally sound!

Disposal of old Appliances

Information concerning collection schedules or locations can be obtained from your local Council or Environmental Health Office.

Use and Control

Before Use

Wait two hours before connecting the appliance to allow the oil to flow back in the compressor.

- Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

- Remove safety elements used for transportation.

Refrigerator compartment Control panel

1 Light switch

2 SUPERFROST-function "on" indicator (yellow) (not on all models)

- SUPERFROST for freezing items quickly in the freezer compartment

3 SUPERFROST button (not on all models)

4 Temperature regulator and ON/OFF switch

Starting the appliance

• The temperature regulator is located at the top of the appliance on the control panel. It is also the ON/OFF switch.
• A coin is required to turn the temperature regulator.
• Insert the plug into the wall socket and turn the thermostat knob clockwise beyond position «O» (OFF).
• The interior lighting comes on. The compressor starts and then runs automatically. To switch off the appliance, turn the temperature regulator to position «O».

Temperature Control

• The temperature regulator allows you to adjust the temperature inside the refrigerator according to use and external conditions.
  • The following effects are of significance in respect of the interior temperature:

• Ambient temperature
• Quantity and temperature of the food stored;
• Frequency with which the door is opened and how long it is left open
• the location of the appliance.

- The temperature inside the appliance is automatically adjusted.

• Setting „1“ = hightest temperature, warmest setting
• Setting „6“ = lowest temperature, coldest setting.
• Setting „O“ = Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

• The shelves can be removed for cleaning.
- To permit storage of food packages of various sizes, the shelves can be placed at different heights.
• To remove the internal shelf pull forward until it can be tipped up or down and removed.

Illustration of a hand inserting a directional arrow into a filing cabinet (no text or symbols)

- Please do the same in reverse to insert the shelf at a different height.

Line drawing of a hand holding a shelf with a ruler, no text or symbols present

- For better use of space, the front half-shelves can lie over the rear ones.

The glass shelf above the vegetable drawers and the bottle shelf should always remain in position, to ensure correct air circulation.

• To permit storage of food packages of various sizes, the central door shelf can be adjusted in height.
- Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.

Diagram of a door or vent with directional arrows indicating flow or movement, no text or symbols present.

- For more thorough cleaning, the top and bottom door sheves can be removed by pulling them in the direction of the arrows, then refitting them in position.

i Hints

Saving Energy

• Pay careful attention to where the cabinet is placed. See the section "Installation". When installed correctly the cabinet will consume less energy.
• Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often.
• If the ambient temperature is high, the thermostat knob is on the coldest setting (higher numbers) and

the appliance is fully loaded, the compressor may run continuously, causing frost or ice to form on the evaporator. If this happens, turn the knob to a warmer setting (lower numbers) to allow automatic defrosting and so a saving in electricity consumption.

• Do not place warm foods inside the appliance. Allow warm foods to cool first.
• Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Hints for refrigeration

- Do not store warm food or evaporating liquids in the refrigerator and do cover or wrap up the food, particularly if it has a strong smell.

To help you use your refrigerator correctly, here are some useful hints:

• Raw meat (beef, pork, lamb & poultry): wrap in polythene bags and place on top of the salad compartment, this being the coldest spot in the refrigerator. Meat can only be stored safely in this way for one or two days at the most.
• Cooked food, cold cuts, jelly, etc.: these should be well covered and can be stored on any of the glass shelves.
• Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom drawer/s.
• Butter & cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to keep out as much air as possible.
• Milk bottles: these should have a top and should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Freezer compartment

Temperature Control

• To freeze fresh foods it is not necessary to change the setting of the thermostat knob.
• For a quicker freezing operation, turn the temperature regulator to setting "6" several hours before freezing fresh items, or press the SUPERFROST button if the model has one. The yellow indicator will light up.
• In this condition, the refrigerator compartment temperature might drop below 0°C. If this occurs return the temperature regulator to a warmer setting or switch off the SUPERFROST function. To do that, press the SUPERFROST button again. The yellow indicator will go off.

- At the first starting-up or after a period out of use, before putting the products in the compartment, let the appliance run for at least two hours on the coldest setting, then turn the thermostat knob to the normal operating position.

Interior Accessories

Ice-cube production

This appliance is equipped with one or more trays for the production of ice-cubes.

Fill these trays with water, then put them in the freezer compartment.

Do not use metallic instruments to remove the trays from the freezer.

Hints

Freezing of fresh food and storage of frozen food

• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required.
• Wrap up the food in aluminium foil or polythene and make sure that the packages are airtight.
• Do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter.
• Do not touch frozen food with wet hands. Your hands could stick to the food and cause skin abrasions.
• It is advisable to show the freezing-in date on each individual pack to enable you to keep tab of the storage time.
• Be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time.
• Do not put carbonated liquids (fizzy drinks, etc.) in the freezing compartment as they may burst.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.

Unplug the appliance before carrying out any maintenance operation.

Warning

This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.

Defrosting

Refrigerator compartment

- Defrosting the refrigerator compartment is automatic. The defrost water drains out through a trough into a container at the back of the appliance, above the motor compressor, where it evaporates.

Diagram of a window with a vertical double-headed arrow and a small object on the floor, no text or symbols present.

- It is important to periodically clean the defrost water drain hole.

Freezer compartment

• Remove the frost with a plastic scraper.
• Whenever the thickness of the frost exceeds 5 mm complete defrosting should be carried out.

Proceed as follows:

• Remove any stored food, wrap it in several layers of newspaper and put it in a cool place.
• Pull out the plug from the wall socket or turn the thermostat knob to the «O» setting.
• Leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, remove the plug as shown in the figure.

Technical diagram of a mechanical device with an inset showing a piston and arrow, labeled PH151 (no text or symbols on the diagram itself)

• When defrosting is completed, dry the interior thoroughly and refit the plug.
• Turn the thermostat knob back to the required setting or replace the plug in the power socket.
• Reload the previously removed food into the compartment.

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.

Cleaning

Never use metal objects for cleaning your appliance as it may get damaged.

NEVER use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as these will damage the surface and leave a strong odour.

Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.

When the appliance is not in use

Disconnect the appliance from the electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.

Changing the light bulb

- Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply, then replace the bulb as follows:

1. unscrew the light cover securing screws.
2. unhook the moving part by pressing it as shown in the figure.
3. Replace the bulb by other with another with the same characteristics.

Diagram of a device with arrows indicating direction, no text or symbols present

Problems may be due to causes which can easily be solved before calling the Technical Service. Please follow these instructions:

SYMPTOM SOLUTION
Door does not close	Weight surpasses the storage limit of the door shelf so spread weight more evenly or take some products out.The appliance is not properly installed. Please look in the “Building-in” section.
It is too warm inside the refrigerator	Set a lower temperature.Distribute the food products to allow cold air to circulate around them.Make sure that the door is completely closed and that the insulating strip is complete and clean.The temperature where the cabinet is placed is above normal room temperature.
It is too cold inside the refrigerator.	Set a warmer temperature.
The compressor works continuously.	Turn the temperature regulator to a lower number.The temperature where the cabinet is placed is above normal room temperature.Check that the ventilation is sufficient and that the ventilation openings are unobstructed.The cause could be the introduction of large quantities of food and/or frequent opening/closing of the door.
There is water inside/outside the refrigerator.	Sometimes is normal. During automatic defrosting frost thaws on the cooling plate.
Water comes out on the floor.	Place the drain hose at the back of the cabinet above the drain bowl.
Noises	Sometimes this is normal. Temperature control may cause clicking sounds when the system is connected or disconnected.The injected cooling gas may produce a gurgling sound while passing through the tubes.The motor may cause a humming noise and/or slight bumping.The insulation material used has a tendency to slightly increase noise levels, how ever it allows for much better insulation and a lower energy consumption.

Customer service and spare parts

If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department and consult the Guarantee card.

Selective ordering of replacement parts can save unnecessary travel and costs.

For this reason always provide the following

appliance information:

• Model Name
  • Model Number (PNC)
• Serial Number (S-No.)

This information can be found on the rating plate inside the cabenit on the left hand wall. We recommend that you enter this information here, so that it is handy if needed.

Technical specifications

The technical data is indicated in the rating plate on the left side inside the appliance.

If there is a power failure when food is in the freezer, do not open the door of the freezer compartment. The frozen food will not be affected if the power cut is of short duration (up to 12 hours) and the freezer compartment is full, otherwise, it is recommended that the food should be used within a short time (a temperature increase of the frozen food shortens its safe storage period).

Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.

• During normal operation, the condenser and compressor at the back of the appliance heat up considerably. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.
• Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

Positioning

• Unpack the cabinet and check that it is in good condition and free of any transport damage.
• The appliance must not be located close to radiators or gas cookers.
• Avoid prolonged exposure of the appliance to direct sunlight.
• For safety reasons, minimum ventilation must be as shown in Fig.

Attention: keep ventilation openings clear of obstruction.

• It is necessary that the niche is provided with a conduct of ventilation having the following dimensions:
  Depth 50 mm
  Width 540 mm

The climate classification can be found on the rating plate, which is located inside the cabinet on the left hand wall.

The following table shows which ambient temperature is correct for each climate classification:

Climate classification	for an ambient temperature of
SN +10 to +32°C
N	+16 to +32°C
ST	+18 to +38°C
T	+18 to +43°C

When the ambient temperature is not included within the range indicated for the class of this appliance, the storage temperature in the appliance cannot be guaranteed; therefore it is advisable to use the food stored as soon as possible.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized auto-transformer must be used.

Important

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the following E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.

- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Attention!

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

See „Installation Instructions“ supplied.

Please check whether, after installing your appliance and especially after rehingeing the door, the door seal seals right round. An untight door seal may lead to heavy frosting and thereby to a higher power consumption.

Warning!

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

Hand placing a black arrow on a shelf with arrows indicating direction (no text or symbols)

Line drawing of a hand holding a shelf with a tray, no text or symbols present

Diagram of a door or cabinet with directional arrows indicating movement, no text or symbols present

Congélation et surgélation

Diagram showing a light bulb placed between two horizontal bars with an upward arrow indicating direction (no text or symbols)

Technical diagram of a mechanical device with an inset showing a piston and spring mechanism (no text or symbols)

Diagram of a device with arrows indicating direction, no text or symbols present

- 73/23 CEE 19/02/73 (Basse Tension) et modifications successives;

Illustration of a hand inserting a device into a filing cabinet with an upward arrow indicating motion (no text or symbols)

Line drawing of a hand holding a shelf with a ruler, no text or symbols present

Diagram of a refrigerator interior with directional arrows indicating airflow or movement (no text or symbols)

Diagram of a double door with a light bulb and upward arrow indicating vertical motion (no text or symbols)

Technical diagram of a mechanical device with an inset showing a piston and arrow (no text or symbols)

Diagram of a device with arrows indicating direction, no text or symbols present

Storingen

Illustration of a hand inserting a directional arrow into a filing cabinet (no text or symbols)

Line drawing of a hand holding a shelf with a small object, no text or symbols present

Diagram of a door with two doors and directional arrows indicating movement or flow (no text or symbols)

Diagram of a double door with a light bulb and directional arrow indicating compression or lifting (no text or symbols)

Technical diagram of a mechanical assembly with a magnified inset showing a component (no text or symbols present)

Diagram of a device with arrows indicating direction, no text or symbols present

• Modello
• Prod. No. (PNC)
• Ser. No. (S-No.)

Illustration of a hand inserting a directional arrow into a filing cabinet (no text or symbols)

Line drawing of a hand holding a shelf with a small object, no text or symbols present

Diagram of a door with two compartments and directional arrows indicating movement (no text or symbols)

Diagram of a double door with a light bulb and upward arrow indicating vertical motion (no text or symbols)

Technical diagram of a mechanical device with an inset showing a piston and arrow, no readable text or symbols present.

Diagram of a device with arrows indicating direction, no text or symbols present