iClock 10 - Docking Station BLAUPUNKT - Free user manual and instructions

Product Type	Docking Station with Clock Radio
Brand	Blaupunkt
Model	iClock 10
Dimensions (approx)	200 x 100 x 150 mm
Weight (approx)	0.5 kg
Power Input	AC 100-240V, 50/60Hz
Power Adapter Output	DC 5V, 1A
Alarm Clock	Dual alarm with weekday/weekend setting
Radio Tuner	FM digital tuner with preset memory
Docking Compatibility	iPhone/iPod with Lightning or 30-pin connector (adapter included)
USB Charging Port	5V, 1A for charging external devices
Display	LED with adjustable brightness (high/medium/low/off)
Snooze Function	9-minute snooze
Sleep Timer	10-90 minutes or off
Battery Backup	CR2025 cell for time/alarm settings during power outage
Maintenance	Wipe with soft dry cloth; do not use liquids or abrasives
Safety	Keep away from water and heat sources; use only supplied adapter
Spare Parts	Contact Blaupunkt customer service for replacement adapter or dock inserts
Repairability	No user-serviceable parts inside; refer to qualified service
Included Accessories	AC adapter, 30-pin dock adapter, user manual

Frequently Asked Questions - iClock 10 BLAUPUNKT

How do I set the time on my iClock 10?

Press and hold the TIME SET button for 3 seconds. The hour will flash. Use the + or - buttons to adjust. Press TIME SET again to set minutes. Press TIME SET once more to confirm.

How do I set an alarm?

Press the ALARM button once. The alarm time will flash. Use + or - to adjust. Press ALARM again to confirm. Ensure the alarm indicator is displayed by pressing the ALARM ON/OFF button.

How can I listen to FM radio?

Press the MODE button until RADIO appears. Press and hold the TUNE button for auto-scan, or press briefly for manual tuning. To save a station, press and hold PRESET and use number buttons.

Can I dock my iPhone with a case?

Thin cases (up to 2mm) may work, but for optimal connection, remove the case. The unit includes a 30-pin adapter; for Lightning devices, use the included Lightning adaptor or connect via the USB port.

How do I adjust the display brightness?

Press the DIMMER button repeatedly to cycle through brightness levels: high, medium, low, and off. The setting is saved automatically.

Why is there no sound from the speakers?

Check that the volume is not turned down. Ensure the device is in the correct mode (alarm, radio, or dock). If using an auxiliary device, verify the cable is fully inserted. Try a power cycle by unplugging for 10 seconds.

How do I reset the iClock 10?

Press and hold the RESET button (located on the bottom) with a paperclip for 5 seconds. The unit will restart and all settings will return to factory defaults.

Can I charge other devices besides iPhones?

Yes, use the USB PORT on the back to charge any device via USB cable. It provides 5V/1A output.

How do I clean the docking station?

Unplug the unit. Use a soft, dry cloth to wipe the surface. Do not use any liquid, alcohol, or abrasive cleaners. Gently clean the dock connector with a dry cotton swab if needed.

What should I do if the display shows 12:00 and beeps?

This indicates a power interruption. The battery backup (CR2025) may be dead. Replace the battery located in the compartment on the bottom. Then set the time and alarms again.

USER MANUAL iClock 10 BLAUPUNKT

Thank you for choosing our new generation of multi-functional mini music station.

This mini music station is designed with multiple functions, perfect sound, high reliability, and exquisite appearance, which brings you great joy when you enjoy your music with it.

Please refer to the following to learn more about iClock 10:

• iPhone/iPod play • Incoming call alert function • Time synchronization function between main unit and iPhone/iPod
• AUX external input • FM radio (87.5-108MHz)
• Clock
• Alarm Clock
• Sleep
• Snooze
• All safety and operating instructions should be read before the product is operated.
• Retain Instructions - The safety and operating instructions should be retained for future reference.
• All warnings on the product and in the operating instructions should be adhered to.
• All operating and use instructions should be followed.

Important Notes

This safety and operating instruction should be retained for future reference.

The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.

Do not install the product in the following areas:

Places exposed to direct sunlight or close to radiators

On top of other stereo equipment that radiate too much heat

Blocking ventilation or in a dusty area

Areas where there is constant vibration

Humid or moist places.

Do not place near candles or other naked flames

Operate the product only as instructed in this manual

Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel.

CE Declaration of Conformity

CE Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can consult it at www.blaupunkt.com.

Safety Instructions

1. READ INSTRUCTIONS – All the safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS – All operating instructions should be followed.
5. WATER AND MOISTURE – The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
6. VENTILATION – The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on a bed, sofa, rug or similar surface that may block the ventilation openings, or in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. HEAT – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCE – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
10. POWER LINES – An outdoor antenna should be located away from power lines.
11. OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
12. ESD WARNING – The display does not function properly or does not react to operation of any of the controls, possibly due to electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
13. DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service personnel when:

a. The power-supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance has been exposed to rain. d. The appliance has been dropped, or the enclosure damaged. e. The appliance does not appear to operate normally.

1. SERVICING – The user should not attempt to service the appliance beyond that described in the user operation instructions. All other servicing should be referred to qualified service personnel.
2. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and unplug the power before making or changing connections.
3. Unplug this apparatus during lightning storms or when unused for long periods of time.
4. Never unplug your radio by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.
5. DON'T remove any fixed cover as this may expose dangerous voltages.
6. DON'T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
7. DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.
8. DON'T continue to operate the equipment if you are in any doubt about if it's working normally or if it's damaged in any way. Switch it off, unplug the mains power and consult your dealer.
9. REPAIR OR REPLACE all electric service cords that have become frayed or otherwise damaged immediately. Do not use a cord that shows cracks or abrasion damage along its length, the plug, or the connector end.

CATALOGUE

Interface Information 2

General Operation....3

Play Music....4

Radio Operation ....5

Setting....5

Specifications....7

Packing content:

1 main unit 1 user manual

1 quick start guide 2 warranty card

1 power adaptor

INTERFACE INFORMATION

Back view

1 FM ANT: FM antenna 2 DC 5V: DC input slot 3 AUX: External music source input (3.5mm jack)

Front view

1 ⏻ : Power On/Off 2 FUN: Function mode switch 3 ▶/T+: Search +/ Next/Forward 4 VOL+: Volume up 5 VOL-/AL MODE: Volume down /Alarm mode 6 /T-: Search-/Last/Backward 7 ▶/MEM/SET: Play and pause/Memory/Clock setting 8 SNOOZE/SLEEP/dimmer: Alarm snooze/Sleep selecting/LCD brightness adjustment

GENERAL OPERATION

Power On

1. After plugging DC5V AC adapter into DC power input jack at the back of the unit, then the display screen lightens, clock appears on the screen, then click press “ . . ” to power on.
2. Volume: VOL- and VOL+ can be adjusted within 00-20.

Play music

IPHONE: The music station will enter "IPHONE" function directly when power is on. Dock the iPhone/iPod on the iPhone/iPod dock, and play music from the iPhone/iPod. (The iPod/iPhone can be changed when the main unit is connected to power.)

Pause: Under "IPHONE/IPOD" mode, press "▶" to pause. (Note: there is no "▶" on the IP19 LCD when "IPHONE/IPOD" is played or paused, but it is on the iPhone/iPod itself.)

Music selection: Press " /T+ /T+" to select music when "IPHONE/IPOD" is played or paused.

Rewind/Forward: Press and hold "◀◀ /T- / ▶▶ /T+" to rewind or forward when "IPHONE/IPOD" is played or paused.

iPhone incoming call alert: If the iPhone is playing music and a call comes in, the unit will automatically switch, stop playing music, and switch to call audio. When the call ends, it will return to music playback.

Time synchronization function between the main unit and iPhone/iPod:

When the unit is powered on or off, plugging in the iPhone/iPod will synchronize the current time from the iPhone/iPod to the main unit.

LINE operation: Select AUX when power is on, and input the external music source to AUX. Turn up the volume and the music is ready.

Radio operation

Manual tuner or automatic tuner: Press "|◀◀/T- / ▶▶▶|" for manual tuning, while press and hold "|◀◀/T- / ▶▶▶/T+" for two seconds to enter automatic tuning. The tuner will stop automatically when it finds a channel.

Manual channel memory: When you manually tune to a channel, press and hold "▶|MEM/SET". Press "|◀◀/T- / ▶▶/T+" to choose the saving location. Up to 20 channels can be memorized and saved.

Memory selection: Press "MEM/SET" to alternate through the memory channels.

Timing setting

1. Press and hold the "MEM/SET" key for about 2 seconds. The "24H" characters will flash on the LCD screen, entering the 12/24H system option. Then press the "|T- / |T+" key to select the "12/24" system. Finally, press the "MEM/SET" key to confirm and enter time setting.
2. Enter the time setting mode. Set the hour first: press the "▶▶/T+" key to select the preset hour, then press the "▶//MEM/SET" key to confirm. Use the same method to set the minutes.

Alarm clock setting

When the unit is in standby status, press and hold the "VOL-/AL MODE" key to enter the alarm setting mode. The clock will be displayed, and the hour digits will flash on the LCD. Press the "◀◀ / ▶▶" key to adjust the hour, then press the "VOL-/AL MODE" key to confirm. The minute digits will then flash on the LCD. Press the "◀◀ / ▶▶" key to adjust the minutes, then press the "VOL-/AL MODE" key to confirm the setting and return to the clock display.

Snooze / Sleep / Dimmer

After the alarm clock rings, press the "SNOOZE" key to activate the snooze function. The alarm stops and will resume after 9 minutes. If you press the " " key, the alarm stops and will not ring again until the same time the next day. (For example, if you set the alarm for 9:05 today and press the " " key, the alarm will stop temporarily and ring again at 9:05 tomorrow.)

Sleep: Press the "SNOOZE/SLEEP/LIGHT" key in any mode to start setting the sleep timer. Select from 120M, 90M, 60M, 30M, 15M, or OFF.

Dimmer: There are three brightness levels for the LCD when the unit is in standby mode.

SPECIFICATIONS

Supports playing iPhone (compatible with most iPods)

iPod Mini4GB 6GB	iPod Touch 1st Generation8GB 16GB 32GB
iPod 4th Generation20GB 60GB	iPod Touch 2nd Generation8GB 16GB 32GB
iPod Classic80GB	iPod Touch 3rd Generation8GB 16GB 32GB
iPod Nano 2nd Generation1GB 2GB 4GB	iPod Touch 4th Generation8GB 16GB 32GB
iPod Nano 6th Generation8GB 16GB	iPhone 3G8GB 16GB
iPod Nano 1st Generation1GB 2GB 4GB	iPhone 416GB 32GB
iPod Nano 5th Generation(Video Camera) 8GB 16GB	iPod Nano 3rd Generation(Video)8GB 16GB
iPod 5th Generation(Video)30GB 60GB 80GB	iPod Classic120GB 160GB(2009)
iPod 4th Generation(Colour Display)40GB 60GB	iPhone 3GS8GB 16GB 32GB
iPod Nano 4th Generation(Video)4GB 8GB	iPod Classic160GB(2007)

S/N Ratio ≥60dB
Max. distortion ≤10%
Output power (8Ω) ≥1.2W
Power supply input DC 5V
FM sensitivity ≤20dB

iPod / iPhone

"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

INTENDED USE

This appliance is intended for receiving and playing audio and video signals. Only use according to these instructions. Improper use is dangerous and will void any warranty claim. Observe the safety instructions.

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

© 2010 ALL rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied or distributed for personal use only.

BLAUPUNKT

Competence Center Audio

M3 Electronic GmbH

Gutenbergstrasse 5

D-65830 Kriftel-Germany

www.blaupunkt.com

Service Hotline:[phone]

All rights reserved. All brand names are registered

trademarks of their respective owners. Specifications are

subject to change without prior notice.