PBH 440 A1 - Drill PARKSIDE - Free user manual and instructions
Find the device manual for free PBH 440 A1 PARKSIDE in PDF.
| Product type | Hammer drill |
| Brand | Parkside |
| Model | PBH 440 A1 |
| Rated voltage | 230 V ~ 50 Hz |
| Power consumption | 440 W |
| No-load speed | 0 - 2800 rpm |
| Impact rate | 0 - 44800 bpm |
| Max. drilling capacity (steel) | 10 mm |
| Max. drilling capacity (wood) | 25 mm |
| Max. drilling capacity (concrete) | 13 mm |
| Chuck | 13 mm, keyless |
| Weight | 1.8 kg |
| Cable length | 2.5 m |
| Protection class | II (double insulation) |
| Sound pressure level | 86 dB(A) |
| Sound power level | 97 dB(A) |
| Vibration (metal drilling) | < 2.5 m/s² |
| Vibration (concrete drilling) | < 17 m/s² |
| Functions | Left/right rotation, variable speed, spindle lock |
| Maintenance | Clean ventilation slots, replace worn brushes |
| Safety | Disconnect before maintenance, wear safety goggles |
| Available spare parts | Brushes, chuck, switch |
Frequently Asked Questions - PBH 440 A1 PARKSIDE
User questions about PBH 440 A1 PARKSIDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Drill in PDF format for free! Find your manual PBH 440 A1 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PBH 440 A1 by PARKSIDE.
USER MANUAL PBH 440 A1 PARKSIDE
MARTEAU PERFORATEUR PBH 440 A1
FR BE
MARTEAU PERFORATEUR
Translation of original operation manual
DE AT CH
BOHRHAMMER
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
GB Translation of original operation manual Page 17
natural_image
Close-up of a black and white drill bit with a metallic shaft and threaded tip (no text or symbols visible)
natural_image
Four different types of metal cutting tools shown in a row, including a tool with a pointed tip and four others with varying end caps (no text or symbols visible)Table des matières
Introduction....2
Usage conforme.... 2
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Directive Machines (2006/42/EC)
Directive RoHS (2011/65/EU)
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Semi Uguzlu
Depicted components.... 18
Scope of delivery 18
Technical details.... 18
General safety instructions for electric tools 19
-
Workplace safety.... 19
-
Electric safety.... 19
-
Safety of personnel 20
-
Use and handling of the electric tool ....20
-
Service 21
Appliance-specific safety instructions for hammer drills 21
Original accessories/ancillary equipment 21
Initial operation 21
Swivelling the additional handle 21
Depth stop 21
Tools and chucks for round shaft bits.... 21
Operation 22
Selecting a function using the function selector switch 22
Select direction of rotation 22
Switching on and off 22
Maintenance and Cleaning 22
Disposal....23
Service....23
Importer 23
Declaration of Conformity/Manufacturer 23
HAMMER DRILL PBH 440 A1
Introduction
tulations on the purchase of your new product. You have decided to purchase a high-quality product. The operating
instructions are a constituent of this product. They contain important information with regard to safety, use and disposal. Before using the product, familiarise yourself with all operating and safety instructions. Use this appliance only as described and only for the specified areas of application. Please also pass these operating instructions on to any future owner(s).
Intended Usage
The PBH 440 A1 hammer drill (in the following appliance) is suitable for:
● Hammer drilling into brickwork, concrete and stone
● Chiselling into concrete, stone and plaster
● Drilling into stone, wood and metal
Any other usage of or modification to the appliance is deemed to be improper usage and carries the risk of serious personal injury.
The manufacturer declines to accept responsibility for damage(s) arising out of usage contrary to the instructions specified below.
The appliance is not meant for commercial use.
Depicted components
① Wing bolt
② Right/left rotation switch
3 On/Off switch
4 Locking button for ON/OFF switch
5 Function selector switch
5a Unlocking button for function selector switch
6 Additional handle
⑦ Tool holder
8 Locking sleeve
9 Depth stop
Scope of delivery
1 hammer drill PBH 440 A1
1 additional handle
1 drill chuck with adapter (see fig. A)
3 drill bits (see fig. B)
1 fl at chisel (see fig. B)
1 depth stop
1 carrying case
1 operating manual
Technical details
Nominal power
consumption: 440 W
Rated voltage: 230 V \~ 50 Hz
Idle speed: n 0-1.650/min
Hammer frequency: 0-7.500/min
Impact energy: 1.2 Joules
Drilling capacity: max. 13 mm for steel
max. 24 mm for wood
max. 19 mm for concrete
Protection class: II /
Noise and vibration information:
Noise measurement determined in accordance with EN 60745 The A-rated noise level of the electric tool is typically:
Hammer drilling:
Noise level:84.78 dB(A)
Acoustic power level: 95.78 dB(A)
Uncertainty K: 3 dB
Chiselling:
Noise level: 90.26 dB(A)
Acoustic power level: 101.26 dB(A)
Uncertainty K: 3 dB
hearing protection!
Total vibration values (vector total of three directions) determined in accordance with EN 60745:
Main handle
Hammer drilling in
Concrete: a_h(HD) = 10.139 m/s^2 , K = 1.5 m/ s^2
Additional handle
Hammer drilling in
Concrete: a_h(HD) = 7.468 m/s^2 , K = 1.5 m/ s^2
Main handle
Chiselling: a_h(CHeq) = 7.024 m/s^2 , K = 1.5 m/ s^2
Additional handle
Chiselling: a_h(CHeq) = 5.060 m/s^2 , K = 1.5 m/s ^2
WARNING!
The vibration level specified in these instructions has been measured in accordance with the measuring procedure that has been standardised in EN 60745 and can be used to make equipment comparisons. The specified vibration emission value can also be used to make an initial exposure estimate. The vibration level varies in accordance with the use of the electric tool and may be higher than the value specified in these instructions in some cases. The vibration load could be underestimated if the electric tool is regularly used in such a way.
NOTE
For an accurate estimate of the vibration load during a certain working period, the times during which the appliance is switched off or is running but not actually being used must also be taken into consideration. This can significantly reduce the vibration load over the total working period.
neral safety instruc- tions for electric tools
WARNING!
▶ Please read all of the safety instructions. Failure to follow the safety instructions listed below can result in electric shock, fire and/or serious injuries.
Keep all safety instructions and other instructions for future use.
The term "electric tools" which is used in the safety instructions relates to mains-operated electric tools (with power cable) and battery-operated electric tools (without power cable).
1. Workplace safety
a) Keep your workplace clean and well-lit. Untidy and poorly-lit working areas can lead to accidents.
b) Do not work with the electric tool in potentially explosive areas in which fl ammable liquids, gases or dust are located. Electric tools produce sparks which could ignite the dust or vapours.
b) Keep children and other persons a safe distance away when using electrical tools. Should you become distracted, you could lose control over the appliance.
2. Electric safety
a) The appliance connecting plug must fit into the plug socket. The plug may not be altered in any way. Do not use adapter plugs together with earthed appliances. Unmodified plugs and suitable wall sockets reduce the risk of electric shock.
b) Avoid bodily contact with earthed surfaces, such as pipes, radiators, ovens and refrigerators. There is an increased risk of electric shock if your body is earthed.
c) Keep electric tools away from rain and moisture. If water or moisture penetrates an electric tool the risk of electric shock increases.
d) Do not misuse the electrical cable, e.g. to carry the appliance, suspend it in storage or to pull the plug from the socket. Keep the cable away from heat, oil, sharp edges and moving appliance components. Damaged or tangled cords and defective plugs increase the risk of electric shock.
e) If you are working with an electric tool outdoors, only use extension cables that are also approved for use outdoors. The use of an extension cord certified for outdoor use reduces the risk of electric shock.
f) If the use of the electric tool in a humid environment is unavoidable, use a fault current circuit breaker. The use of a fault current circuit breaker reduces the risk of electric shock.
3. Safety of personnel
a) Be alert at all times, pay attention to what you are doing and act sensibly when you are using an electric tool. Do not use an electric tool if you are tired or under the influence of drugs, alcohol or medication. Even a simple lapse of attention while using an electrical hand tool is sufficient to lead to serious injuries.
b) Wear personal protection equipment, and always wear a pair of protective goggles. Wearing personal protective equipment such as a dust mask, non-slip safety shoes, protective gloves, helmet or hearing protection, depending on the type and use of the electrical tool, reduces the risk of injuries.
c) Avoid unintentional operation of the appliance. Ensure that the electric tool is switched off before connecting it to the power supply, picking it up or carrying it. Carrying the electric tool with your finger on the ON/OFF switch or connecting the appliance to the mains supply whilst it is switched on can lead to serious accidents.
d) Remove any adjusting tools or spanners before switching on the appliance. A tool or wrench in a rotating appliance component can cause serious injuries.
e) Avoid adopting an unusual posture. Ensure that you position yourself securely and you are balanced at all times. This gives you much
better control over the electric tool, especially in unexpected situations.
f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts. Loose clothing, jewellery and long hair can be caught by moving parts.
g) If dust extraction and collecting equipment can be fitted, ensure that it is attached and used properly. The use of an extraction system can reduce hazards caused by dust.
4. Use and handling of the electric tool
a) Do not overload the appliance. Use the correct electrical tool for your work. With the correct electrical tool, you will work better and more safely within the specified performance range.
b) Never use a handheld electrical tool with a defective switch. An electrical tool that can no longer be switched on or off is dangerous and must be repaired.
c) Remove the plug from the socket before making adjustments to the appliance, changing accessories or putting the appliance into storage. These precautionary measures prevent accidental starting of the appliance.
d) Store unused electric tools out of the reach of children Do not allow persons who are not familiar with the appliance or who have not read these instructions to operate the appliance. Electrical tools are dangerous if used by inexperienced persons.
e) Look after electric tools with care. Check to see whether moving parts are functioning correctly and are not jamming, whether parts are broken or damaged and that the functioning of the electric tool is not impaired. Arrange for damaged components to be repaired before using the appliance. Many accidents are caused by poorly maintained electrical tools.
f) Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges jam less often and are easier to control.
g) Use the electric tools, accessories, insertion tools etc. in accordance with these instructions. Take heed of the operating conditions and the activities to be performed. The use of electrical tools for purposes other than their intended applications can result in dangerous situations.
5. Service
a) Only allow qualified specialists with original spare parts to repair your electric tool. This ensures that your electric tool remains safe.
Appliance-specific safety instructions for hammer drills
■ Wear hearing protection. The effect of noise can lead to hearing loss.
■ Use the additional handles supplied with the appliance. Loss of control can lead to injuries.
- Hold the appliance by the insulated handles when you are carrying out work during which the insertion tool may come into contact with concealed power cables or its own power cable. Contact with a live cable may also make metal parts of the appliance live and lead to electric shock.
■ Wear a dust mask.
WARNING! TOXIC DUST!
▶ Working with harmful / toxic dusts results in health hazards for the person operating the appliance and for other persons in the area.
■ ATTENTION - SERVICE LINES! DANGER!
Take steps to ensure that you do not hit any service lines (electricity, gas, water) when working with the electric tool. If necessary, check with a service line detector before you start to cut or drill into a surface.
Original accessories / ancillary equipment
■ Only use accessories and additional appliances that are specified in the operating instructions and are compatible with the appliance.
Initial operation
Swivelling the additional handle
◆ The gripping position of the additional handle can be varied. Turn the wing bolt 1 anticlockwise and swivel the additional handle 6 to the required position.
◆ The snap-in position ensures that the additional handle 6 is firmly in place and cannot turn.
♦ Tighten the wing bol① again afterwards.
Depth stop
◆ Open the wing bol1.
◆ Insert the depth stop ⑨ into the additional handle ⑥.
◆ Ensure that the toothing on the depth stop is facing upwards.
◆ Pull the depth stop 9 out far enough for the distance between the tip of the drill and the tip of the depth stop to correspond with the required drilling depth.
♦ Tighten the wing bol1 again.
Tools and chucks for round shaft bits.
Use tool / chuck:
◆ Pull the locking sleeve 8 backwards and insert the tool.
◆ Release the locking sleeve. This locks the holder. Check that the tool is properly locked by pulling it. The system has radial play because of the design.
Remove tool / chuck:
◆ Pull the locking sleeve on the tool backwards.
WARNING!
▶ Do not use the chuck for round shaft bits for hammer drilling or chiselling!
Operation
Selecting a function using the function selector switch
- Press and hold the unlocking button for function selector switch 5 and rotate the function selector switch 5 to that the required symbol engages at the arrow mark.
The functions are marked as follows:
| Function | Symbol |
| Drilling / screwdriving | |
| Hammer drilling | |
| Chiselling | |
| Chisel position adjustment |  |
Adjust chisel position:
You can rotate the tool to the required position for chiselling using this function.
♦ Rotate the function selector switch⑤ to position ⇌.
♦ Rotate the tool into the tool holder⑦ to the required position.
♦ Rotate the function selector switch 5 to position ↑ for the chiselling function.
Select direction of rotation
♦ Select the direction of rotation by adjusting the right/left rotation switch ②
WARNING!
The right/left running switch ^2 may only be used / adjusted if the appliance is at a standstill.
Switching on and off
Switching the appliance on:
◆ Press the ON/OFF switch ^3 .
Switching the appliance off :
◆ Release the ON/OFF switch ^3 .
Switching to continuous operation:
◆ Press the ON/OFF switch ③ and lock it in this position with the ON/OFF switch locking button ④
Switching off continuous operation:
◆ Press the ON/OFF switch ^3 and release it again.
Maintenance and Cleaning
NING! RISK OF INJURY! Switch the appliance off and remove the
power plug before starting any work.
■ The appliance must always be clean, dry and free from oil or grease.
■ To clean the casing, use a soft cloth.
■ Regularly clean the tool holde⑦.
WARNING!
If the connecting cable needs to be replaced, this must be carried out by the manufacturer or his representative in order to avoid hazardous situations.
Disposal
ckaging is made from environmen- tally-friendly material and can be disposed off at your local recycling plant.
dispose of electrical tools in your normal domestic waste!
As required by European Guideline 2002/96/EC, worn-out electrical tools must be collected separately and fed into an environmentally compatible recycling process.
Your local communal or municipal authorities can provide information on how to dispose of the worn-out appliance.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 90883
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Declaration of Conformity/Manufacturer C€
We, KOMPERNASS HANDELS GMBH, Custodian of Documents: Mr. Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards, normative documents and the EC directives:
Machinery directive (2006/42/EC)
EU Low Voltage Regulations (2006/95/EC)
EMC (Electromagnetic Compatibility) (2004/108/EC)
RoHS Directive (2011/65/EU)
Related harmonised standards:
EN 60745-1:2009 + A11
EN 60745-2-6:2010
EN 55014-1:2006 + A1 + A2
EN 55014-2:1997 + A1 + A2
EN 61000-3-2:2006 + A1 + A2
EN 61000-3-3:2008
Type designation of machine:
Hammer drill PBH 440 A1
Year of manufacture: 05 - 2013
Serial number: IAN 90883
Bochum, 23.07.2013
Semi Uguzlu
- Quality Manager -
Subject to technical changes in the course of further developments.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
DEUTSCHLAND / GERMANY
www.kompernass.com
- MARTEAU PERFORATEUR PBH 440 A1
- MARTEAU PERFORATEUR
- BOHRHAMMER
- Table des matières
- Introduction....2
- General safety instructions for electric tools 19
- Initial operation 21
- Operation 22
- Maintenance and Cleaning 22
- Disposal....23
- Service....23
- Importer 23
- Declaration of Conformity/Manufacturer 23
- HAMMER DRILL PBH 440 A1
- Introduction
- Intended Usage
- Depicted components
- Scope of delivery
- Technical details
- Noise and vibration information:
- Hammer drilling:
- Chiselling:
- Main handle
- Additional handle
- WARNING!
- NOTE
- neral safety instruc- tions for electric tools
- Keep all safety instructions and other instructions for future use.
- Workplace safety
- Electric safety
- Safety of personnel
- Use and handling of the electric tool
- Service
- Appliance-specific safety instructions for hammer drills
- WARNING! TOXIC DUST!
- Original accessories / ancillary equipment
- Initial operation
- Swivelling the additional handle
- Depth stop
- Tools and chucks for round shaft bits.
- Use tool / chuck:
- Remove tool / chuck:
- Operation
- Selecting a function using the function selector switch
- Adjust chisel position:
- Select direction of rotation
- Switching on and off
- Switching the appliance on:
- Switching the appliance off :
- Switching to continuous operation:
- Switching off continuous operation:
- Maintenance and Cleaning
- Disposal
- Service
- Importer
- Declaration of Conformity/Manufacturer C€
Brand : PARKSIDE
Model : PBH 440 A1
Category : Drill