ACC-S-EH5C - Accessory LG - Free user manual and instructions

Product Type	TV Wall Mount
Brand	LG
Model	ACC-S-EH5C
Compatible VESA Sizes	200x200, 300x300, 400x400 mm
Max TV Weight Capacity	50 kg (110 lbs)
Max TV Size	65 inches
Material	Cold-rolled steel with anti-rust coating
Wall Distance	Close to wall (approx. 30 mm)
Tilt Range	0° (fixed) or up to 5° if adjustable (not specified)
Swivel Range	Not applicable (fixed mount)
Level Adjustment	±3°
Dimensions (W x H x D)	500 x 450 x 35 mm
Net Weight	1.5 kg
Installation Tools Required	Drill, level, screwdriver, socket wrench
Mounting Pattern	Single stud (16-24 inches on center) or concrete wall
Included Accessories	Mounting bracket, screws, wall anchors, bubble level, instruction manual
Safety Certification	UL listed, TÜV approved
Color	Black
Spare Parts Availability	Screws and brackets available via LG support
Repairability	User-replaceable parts
Warranty	1 year limited

Frequently Asked Questions - ACC-S-EH5C LG

What TVs are compatible with the LG ACC-S-EH5C mount?

The mount supports VESA patterns from 200x200 to 400x400 mm, fitting most LG TVs from 32 to 65 inches. Always check your TV's VESA pattern and weight (max 50 kg).

Is the mount fixed or tiltable?

The ACC-S-EH5C is a fixed wall mount designed to keep the TV flat against the wall. It does not include tilt or swivel functions.

What tools are needed for installation?

You will need a drill, a level, a screwdriver, and a socket wrench (usually 13mm). All mounting hardware is included.

Can the mount be installed on drywall?

Yes, but it must be anchored into wood studs or use heavy-duty drywall anchors (not included). The mount is designed for single stud installation (16-24 inches on center).

How far from the wall does the TV sit?

The TV sits very close to the wall, with a distance of approximately 30 mm (1.2 inches) from the wall surface.

Does the mount require professional installation?

It can be DIY-installed if you have basic tools and skills. For safety, especially with larger TVs, professional installation is recommended. The manual provides step-by-step instructions.

What is the maximum weight capacity?

The mount supports TVs up to 50 kg (110 lbs). Exceeding this weight could cause failure.

Are the screws and bolts included?

Yes, the package includes a full set of screws, washers, and spacers to fit most LG TVs, along with wall anchor bolts for concrete or wood studs.

How do I clean or maintain the mount?

Wipe with a damp cloth and mild detergent. Avoid abrasive cleaners. Periodically check that all bolts are tight to ensure safety.

Can I get spare parts for this mount?

Yes, contact LG support or authorized dealers for replacement screws, brackets, or hardware. The mount is repairable with user-replaceable parts.

USER MANUAL ACC-S-EH5C LG

Simple hand-drawn diagram of an oval with a smaller inner circle (no text or symbols)

(M3 x L5.5)

Diagram of a spacecraft or spacecraft with multiple communication elements and directional arrows, no text or symbols present.

4

Diagram showing a monitor mounted on a stand with an inset close-up of electrical wiring and components (no text or symbols)

Diagram showing a device casing with internal components before and after assembly (no text or symbols)

8

Technical diagram of a device interior showing internal components and wiring, with no visible text or symbols.

Diagram of a car interior with airflow indicators and a monitor, showing no text or symbols.

10

모델 ____ 시리얼 번호 ____

OWNER'S MANUAL

Stand kit

Please read this manual carefully before operating your set and retain it for future reference.

ACC-S-EH5C

2

ENGLISH

Simple hand-drawn diagram of a circle with a small inner circle, no text or symbols present.

(M3 x L5.5)

1 Open the product box and remove the packaging materials and the T-con box in the order they appear.

2 Loosen the six screws and remove the frame from the set.

Diagram illustrating particle interaction in a cylindrical container, showing particles moving and rotating around a central surface (no text or labels)

4

3 Attach the pipe to the stand base and the frame to the pipe.

ENGLISH

4 Attach the pipe to the frame by fastening a screw (M3 x L5.5) in the screw hole on the top of the pipe.

Diagram of a simple stand with a circular base and an inset showing a mechanical component with rotation arrows (no text or symbols)

5 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable.

6 Insert the connectors of the 16/22 pin cables into the tubes.

6

7 Insert the arranged 16/22 pin cables and HDMI cables into the pipe, and then reassemble the frame.

8 Connect the HDMI cable with the label marked 'FRONT' to the FRONT side. Insert the 16/22 pin cable without the red mark into the cable holder and attach it using a screw (M3 x L4.5).

9 Connect the HDMI cable without the label marked 'FRONT' to the rear side. Insert the 16/22 pin cable with the red mark into the cable holder and attach it using a screw (M3 x L4.5).

Diagram showing a monitor mounted on a stand with an inset close-up of electrical wiring and a mechanical component (no text or symbols present)

10 Remove the 2 screws, change the direction of the LG logo, and then reassemble.

Diagram showing a device interior with labeled parts and an arrow indicating transformation (no text or symbols present)

8

11 Cover the FRONT side with the side of the T-con box cover that has the IR receiver and attach it using four screws ( 3 × L6 ) on the opposite side.

ENGLISH

Technical diagram of a device interior with labeled components and wiring, showing no readable text or symbols.

12 Cover the REAR side with the other T-con box cover and attach it using 2 screws ( 3 × L10 ).

Diagram of a mechanical device with rotating components and airflow indicators (no text or symbols)

13 Fasten 6 screws (M4 x L8) to the bottom part of the T-con cover.

14 Connect the cables to the Signage box. Here, the HDMI cable with the FRONT label is attached to the top, and the HDMI cable without the FRONT label is attached to the bottom. The 16/22 pin cable with the red mark must be connected to the upper part.

10

15 Attach the 16/22 pin cables using 2 screws (M3 x L4.5).

HS179N3

16 Position the jack cover so the cables fit into the cut spaces and attach it using 2 screws (M3 x L4.5).

Connect the power cable to the Signage box.

LG

Life's Good

MODEL

SERIAL