TL-WR702N - Router TP-LINK - Free user manual and instructions

Product type	Nano wireless router
Brand	TP-Link
Model	TL-WR702N
Dimensions (L x W x H)	57 x 57 x 17 mm
Weight	Approximately 100 g
Power supply	5 V DC, 1 A (via AC adapter or USB port)
Power consumption	Max 2.5 W
Wireless standard	IEEE 802.11 b/g/n (150 Mbps max)
Frequency	2.4 GHz
Ports	1 Ethernet port 10/100 Mbps (RJ45)
Operating modes	Router, access point, repeater, wireless client
Wireless security	WEP, WPA/WPA2-PSK, WPA2-Enterprise
Firewall	Built-in (SPI, IP/MAC/URL filtering)
Number of antennas	1 internal antenna
Management	Web interface (http://tplinkwifi.net)
Buttons	Reset, Mode
LEDs	Power, wireless, Ethernet
Operating temperature	0°C to 40°C
Operating humidity	10% to 90% (non-condensing)
Maintenance and cleaning	Use a soft, dry cloth. Do not use chemicals or liquids.
Safety information	Keep away from heat sources, do not block ventilation.
Spare parts and repairability	User repairable. No spare parts available. Contact customer service in case of failure.
Package contents	Router, Ethernet cable, AC adapter, quick installation guide, resource CD (optional)
General information	Certifications: CE, FCC, RoHS. Warranty: 2 years.

Frequently Asked Questions - TL-WR702N TP-LINK

How to configure the TL-WR702N router?

Plug in the AC adapter and connect the Ethernet cable to your modem or PC. Open a browser and go to tplinkwifi.net. Follow the quick setup wizard to choose the operating mode and set Wi-Fi parameters.

What are the available operating modes?

The TL-WR702N offers four modes: Router (connection sharing), Access point (wired to Wi-Fi conversion), Repeater (extending existing network), and Wireless client (transforming into a Wi-Fi adapter for a wired device).

How to switch between modes?

Use the Mode button on the side of the router. Briefly press to cycle through modes. The corresponding LED indicates the active mode (Router, AP, Repeater, Client).

How to reset the router to factory settings?

Press and hold the Reset button (next to the Ethernet port) for about 5 seconds until the LEDs flash. The router will restart automatically with default settings (IP 192.168.0.254, SSID TP-LINK_XXXXX).

How to secure my Wi-Fi network?

In the web interface, go to Wireless > Wireless Security. Choose WPA2-PSK (recommended) and set a strong password of at least 8 characters. Avoid using WEP which is less secure.

The router does not turn on, what to do?

Check that the AC adapter is plugged in and the outlet works. The USB port can also power the router (5V/1A). If the Power LED remains off, try another micro-USB cable or adapter.

How to use this router as a repeater?

Switch to Repeater mode using the Mode button. Connect to tplinkwifi.net, click Quick Setup, select the existing Wi-Fi network, enter its password, and confirm. The router will then extend coverage.

What is the maximum range of the Wi-Fi signal?

Indoors, typical range is about 30 meters depending on obstacles (walls, doors). Outdoors, it can reach 100 meters. For better coverage, place the router high and away from interference.

Can I connect multiple devices at the same time?

Yes, the TL-WR702N supports up to 15 wireless clients simultaneously depending on network conditions. For optimal performance, limit the number to 10.

How to update the firmware?

Download the latest firmware from www.tp-link.com. Log into the web interface, go to System Tools > Firmware Upgrade, select the downloaded file, and click Upgrade. Do not turn off the router during the process.

USER MANUAL TL-WR702N TP-LINK

TP-Link Technologies Co., Ltd.

South Building (floors 1, 3, 4, 5) and 28 (floors 1-4), Central

Science & Technology Park, Sherran Rd, Nanshan.

Shenzhen, China

Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading

RG1 8EW

TP-Link Italia S.r.l.

TP-Link Netherlands B.V.

Archimedesbaan 18, 3439 MF Nieuwegein

TP-Link (Nordic) AB

Forumvägen 14, Plan 13, 131 53 Necka, Sweden

TP-Link Hellas Ltd.

Marathonodromou 77, Marousi 151 24, Greece

NWS.TP-Link Portugal, Unipessoal, Lda.

Specifications are subject to change without notice. φ_max is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2017 TP-Link Technologies Co., Ltd. All rights reserved.

www.tp-link.com

Quick Installation Guide

Portable Router

7106507475 REV2.1.0

This guide applies to TP-Link portable routers. Here we take the TL-WR802N as an example. Your router may not support all five operation modes demonstrated.

CONTENTS

04 / German 08 / English 12 / Spanish 16 / Greek 20 / French 24 / Italian 28 / Portuguese 32 / Finnish 36 / Dutch 40 / Swedish 44 / Norwegian 48 / Danish 52 / Turkish

Hardware Connection

■ Standard Router Mode

■ Repeater Mode

■ Access Point

■ WISP Client Router

German

Hardware Installation

Determine Operation Mode

Refer to the following table to determine an appropriate operation mode as needed.

Scenario Operation Mode
The wired network is only limited to one device to connect at a time, but I want to share the internet with more wireless devices.	Standard Wireless Router
I am in a Wi-Fi "dead-zone" or a place with weak wireless signal.I want to have a larger range of the wireless signal for a better internet connection throughout my home or office.	Repeater
I have a wired device with an Ethernet port and no wireless capability, for example, a Smart TV, Media Player, or game console. I wish to be able to play it online wirelessly in my home.	Client
I want to access the internet wirelessly, but this place only has an Ethernet port (wired network) available.	Access Point
I want to receive internet access from a wireless internet service provider(WISP), and share the internet with local devices.	WISP Client Router

Connect the Hardware

Connect the hardware according to the diagrams in the opening chapter of this guide. If your router has a mode switch, switch it to the mode you need.

Configure the Router

1. Connect your device to the router wirelessly. The SSID (wireless network name) and password are printed on the router's label.
2. Launch a web browser and type http://tplinkwifi.net in the address bar. Enter admin for both username and password to log in.
3. Go to Quick Setup and click Next to start.
4. Follow the step-by-step instructions to complete the initial configuration.

Enjoy the internet!

Note: If you have changed the default SSID and password, you have to reconnect your wireless devices to the new Wi-Fi network.

FAQ (Frequently Asked Questions)

Q1. How do I recover the router's web management password or retrieve my Wi-Fi password?

• If you forget the password required to access the router's web management or your Wi-Fi password, you must restore the router to its factory default settings.
• If you want to retrieve your Wi-Fi password, use a device that is connected to the router (wired or wirelessly) and log in to the router's management page, under Wireless > Wireless Security.

Q2. How do I restore the router to its factory default settings?

- With the router powered on, use a pin to press and hold the Reset button for about five seconds, and then release the button.

Note: Resetting the router will clear all previous configurations.

Q3. What can I do if there is no internet access?

• If using a cable modem, reboot the modem, then wait until its Online LED is solid (ON). Reconnect the cable to the router.
• Set the router to Router Mode according to the instructions. If internet access is still not available after completing the steps above, contact TP-Link Technical Support.

Q4. What can I do if my wireless keeps dropping?

- By default, your wireless channel is set to Auto, which automatically selects the least-congested channel between 1 and 11 for best performance, but it may also cause frequent wireless drops. In this case, setting your wireless channel to a fixed one will prevent it from changing, and likely stabilize your network connection.

Q5. What can I do if I can't access the router's web management page?

• Set the computer to obtain an IP address automatically.
• Reboot your router and computer, and try again.

Q6. What can I do to maximize my signal strength?

When choosing an ideal location to optimize wireless signal in Repeater mode, please refer to the following recommendations.

- The Best Way is Halfway: Generally, the ideal location for the portable router is halfway between your main router and your Wi-Fi devices. If that is not possible, place the router closer to your main router to ensure stable performance.

- Less Obstacles Ensure Better Performance: Choose a location with less obstacles that may block the signal between the portable router and the main router. An open corridor or a spacious location is ideal.

- Less Interference Provides More Stability: Choose a location away from other Bluetooth devices or radioactive devices such as cordless phones, microwaves, to minimize interference.

Navigate in Internet!

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link Three Years Limited Product Warranty

For TP-Link Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in accordance with TP-Link's guidelines for a period of THREE YEARS from the date of original retail purchase by the end-user purchaser.

FOR ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.