HD-Free - Digital decoder HUMAX - Free user manual and instructions

USER MANUAL HD-Free HUMAX

HD Digital Satellite Receiver

The default password is 0000.

Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice.

Copyright (Copyright © 2012 HUMAX Corporation)

Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law.

Meaning of Symbols

	To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
	This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.
	This symbol indicates important instructions accompanying the product.

Warnings, Cautions and Notes

Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations.

Warning

Indicates a hazardous situation which could result in serious injury

Caution

Indicates a situation which could damage the equipment or other apparatus. Note

Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation.

Warranty

The warranty does not cover parts which may become defective due to misuse of the information contained in this manual.

'WEEE' Instructions

This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal.

Domestic users:

Please contact either the retailer where you purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling.

Business users:

Contact your supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Trademarks

- Irdeto is a trademark of Irdeto Access B.V.

For Your Safety

For Your Safety

Safety Instructions

1. POWER SUPPLY

• Operate this product only from the type of power supply shown on the marking label. If you do not know the type of power supplied to your home, contact your local power company.
• Disconnect the power supply before you start any maintenance or installation procedures.

2. OVERLOADING

• Make sure that the wall outlet, extension cord and adapter have a sufficient power rating for the appliance. If not, this can cause an electric fire shock.

3. LIQUID

- Do not expose this product to liquids. Do not put objects filled with liquid on the product.

4. CLEANING

• Disconnect the product from the wall outlet before you clean it.
• Use a moist cloth to clean the product. Do not use solvents. Wipe the surface gently with a soft cloth as it may get scratched.

5. VENTILATION

• Make sure that the slots on top of the product are not blocked. It is necessary to have a sufficient airflow into the unit.
  • Do not put electronic equipment on the product.
• Do not put objects on the product. This will block the ventilation or cause damage to the surface.

6. ATTACHMENTS

- Do not use any unsupported attachments as these may be hazardous or cause damage to the product.

7. LIGHTNING, STORM OR NOT IN USE

- Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long

periods of time. This will prevent damage to the unit due to lightning and power-surges.

8. EXTRANEOUS OBJECTS

- Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.

9. REPLACEMENT OF PARTS

- When replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit.

10. CONNECTION TO THE SATELLITE DISH LNB/CABLE

TV SIGNAL/AERIAL

- Disconnect the power supply before you connect or disconnect the cable from the satellite dish/cable TV signal/aerial. If not, this can cause damage to the LNB/cable TV line/aerial.

11. CONNECTION TO THE TV

- Disconnect the power supply before you connect or disconnect the cable from the TV. If not, this can cause damage to the TV.

12. EARTHING (satellite only)

- Earth the LNB cable to the system earth for the satellite dish.

13. LOCATION

• Place the product indoors to avoid exposure to lightning, rain or sun. Do not place it near a radiator or heat register.
• Keep at least 10 cm clearance from any other appliances susceptible to electromagnetic influences such as a TV or a VCR.
• If you place the product on a rack or a bookcase, make sure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting.
  • Do not place the product on an unstable surface where it can fall. A falling product can

cause serious injury to a personnel and serious damage to the appliance.

Cautions and Warnings

1. To avoid damage of the power cord or plug

• Do not modify or process the power cord or plug arbitrarily.
  • Do not bend or twist the power cord.
  • Make sure to disconnect the power cord while you hold the plug.
• Keep heating appliances as far as possible from the power cord to prevent the cover vinyl from melting.
• The mains plug, as a disconnection device, shall remain readily accessible by the user.

2. To avoid electrical shock

• Do not open the main body.
- Do not insert metal or inflammable objects inside the product.
• Do not touch the power plug with wet hands.
• Disconnect the power cord in case of lightning.
- Unplug the power cable before you install the antenna cable.

3. To avoid damage of product

• Do not use the product when it is out of order. If you continue to use the product when defective, this may cause serious damage. Make sure to contact the customer service centre if the product is out of order.
• Do not insert metal or alien substance into the slots for the modules or Smartcards. It may cause damage to the product and reduce its life span.

4. To avoid damage of the hard disk drive (PVR only)

- Do not move the product or turn the power off suddenly while the hard disk drive is running.

- The company shall not be liable for any corruption of data on the hard disk drive caused by carelessness or misuse of the user.

Contents & Accessories

Notice....1

For Your Safety 2

Contents & Accessories 3

Contents

Accessories

Quick Start Guide 4

Front & Rear

Remote Control

Connections

Wizard

Managing Channels 8

Channel List

Edit Channels

TV Guide....12

Preferences....13

Installation....14

Search Channels [Fixed Antenna]

Search Channels [SCD Antenna]

Search Channels [Motor Antenna]

Software Update (OTA)

Factory Default

System....18

Appendix....19

Specification

Trouble Shooting

HUMAX Customer Support

Error Messages

Glossary

Open Source Software Notice

Warranty Certificate

AccessoriesContents

Remote Control / Batteries

User's Manual

HDMI Cable

AC Adaptor
Note: This accessories may vary according to area.

Quick Start Guide

Front & Rear

Note: The image may differ from the actual product.

STANDBY LED Red light is emitted when the product is in standby mode. USB Port Connect a USB storage device. (Currently not supported) STANDBY Switches between operation and standby modes Smartcard Slot LNB IN 13.5/18V=200mA Max VIDEO L R HDMI DC 12V=2A MADE IN KOREA

1 LNB 1 IN: Connect a satellite antenna cable.
2 VIDEO/AUDIO: Use an RCA cable to connect to the TV.
3 HDMI: Use an HDMI cable to connect to the TV.
4 AC Adaptor: Use the AC adaptor to connect to the power supply.

Inserting the Smartcard

1. Hold the Smartcard horizontally with the electronic chip facing downwards.
2. Insert the Smartcard into the slot.

Quick Start Guide

Remote Control

OK HPC - SUB AUDIO TEXT 1 UST +/-II - NOT - EXIT - BACK + - P - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

	MUTE Mutes audio
	WIDE Sets the display format
	STANDBY	Switches between operation and standby modes
	SUB Changes the subtitle language
	AUDIO Changes the audio language
	TEXT Enters the digital text service
1	Playback Control Buttons	Slow, Record, Rewind, Fast Forward, Play/Pause, Stop, Instant Replay, Skip (Reserved for future functionality)
	LIST Displays the channel list
	MEDIA	Displays the media list (Reserved for future functionality)
	GUIDE Displays the programme guide
	EXIT Exits all On-Screen Display (OSD) screens
	BACK	Returns to the previous channel or the previous screen
	OK Selects a menu or confirms
	ARROW Buttons Moves the cursor up, down, left or right
	+/-	Changes the audio volume
	P▲/▼ Changes the channel or page

	i (Information)	Displays the channel and programme information
	OPT+ Displays the channel attributes
2	COLOUR Buttons	For interactive applications
	NUMERIC (0-9)
	TV/RADIO	Switches between TV and radio modes
	MENU Displays the main menu

Inserting Batteries

Insert the batteries matching the plus(+) and minus(-) at each end.

Quick Start Guide

Connections

This section describes how to connect your product to match your particular devices and to gain optimum signal quality.

Warning: Connect all devices before you plug any power cords into the wall outlet. Always turn off the product, TV and other devices before you connect or disconnect any cables.

Note: If you encounter any problems setting up your product, please contact your local retailer or HUMAX Customer Service.

graph TD
    A["Antenna"] -->|1| B["UNIN 3.5/18V~300mA Max"]
    C["RCA Cable"] -->|2-2| D["VIDEO L AUDIO R HDMI"]
    E["HDMI"] -->|2-1| F["COVID 12V AC 2A"]
    G["Camera"] --> H["Made in Korea"]

Connecting the Antenna

Connect the aerial to the LNB IN.

Connecting the TV

2-1 Using an HDMI cable

For the best picture quality, use an HDMI cable to connect to the TV.

2-2 Using an RCA cable

For good picture quality, use an RCA cable to connect to the TV.

Powering On

1. Connect the power cord of the product to a wall outlet.
2. Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front panel.

Quick Start Guide

Wizard

The installation wizard operates automatically when you power on the product for the first time or do factory default in menu.

Note: If you exit the installation wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, go to MENU > Settings > Installation and search for more channels.

1. Language

Select the appropriate language from the list.

2. Display

Set the video output to your TV.

3. GMT Offset

Select your country to determine the time zone.

4. Search Channels

• Automatic Search: Search all channels of NILESAT(7.0W) and BADR(26.0E) and HOT BIRD(13.0E) automatically.
- Skip: If you have SCD or motor antenna, skip the search process and go to MENU > Settings > Installation.

5. Automatic Search

Channel search will begin automatically.

Save the found channels when the search is complete.

6. Result

The result of the installation wizard will show. Select Finish to exit the wizard.

Managing Channels

Programme Information (i-Plate)

The i-plate is an information banner that is displayed for a few seconds whenever you change channels. Press the i button while you watch a programme to display the i-plate. Press the EXIT button to hide it.

Channel number and name programme name Current time and date Group name 1003 SEASONS Seasons magazine 22:00 24:30 23:15 TUE 03.13.2012 TV Playing time Icons Signal strength quality

	Viewing detailed programme informationPress the i button again while the i-plate is displayed.
	Viewing Previous/next programme informationPress the ▲▲ button while the i-plate is displayed.
	Viewing Programme information of other channelsPress the ▲▼ button while the i-plate is displayed. Press the OK button to change to the selected channel.

Icons

	Locked Programme
	Scrambled Programme
13	Parental level
HD	HD Programme
	Scheduled programme
10801	Resolution
	Subtitle
	Teletext
4:3	Screen ratio

Managing Channels

Channel List

You can access the channel list in several ways.

• Press the LIST button.
• Press the MENU button and select Channel List.

Changing Channels

Select the channel you want to watch and press the OK button. The channel will change.

HDTV A-Z Radio Favourite1 Favourite2

Changing Group

Press the ▶ button to display the list of the selected channel group. (TV, HDTV, A-Z, Radio, Favourite 1\~5, Recent)

Sorting Channels

RED

Press the RED button to sort the channels in numerical or alphabetical order.

Filtering Channels

GREEN

Press the GREEN button to filter the channels according to channel type in TV or Radio list. (Satellite, Pay Channel, All)

Note:

• : Locked channel, : Scrambled channel (CAS icons)
- Press the I button to view the detailed channel information.
- Press the LIST or EXIT button to exit.
- Press the TV/RADIO button to switch between TV and Radio groups.

Editing Channels in Channel List

Select a channel you want to edit and press the YELLOW button.

Setting Favourite Channels

Favourite

Select a favourite group you want to move the channel to and press the OK button.

To remove a channel from a favourite group, select the group and press the OK button again.

Lock

Locking Channels

Select On or Off.

Note:

• The default password is 0000. If you have forgotten your password, please contact your local distributor.
  • To edit multiple channels, go to MENU > Settings > Edit Channels.

Managing Channels

Edit Channels

Editing Channel List

MENU > Settings > Edit Channels > Edit Channel List

Edit Channel List will help you delete, move, lock or rename multiple channels.

Group name Marked/Total channels Settings > Edit Channels > Edit Channel List TV 1001 ZDFdakukan 1002 DISCOVERY GESCHICH. 1003 NDR FS HH 1004 SEASONS 1005 ZDFdakukan 1006 TAQUILLA 19 1007 CINEMANIA 1008 CINEMANIA 2 1009 CINEMANIA 3 Color: Mose Group Preview Function Function buttons : Coloured or OPT+ button

Note:

• Locked channel, : Scrambled channel (CAS icons)
• Press the i button to view the detailed channel information.
• Press the TV/RADIO button to switch between TV and Radio groups.
• Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
• The channels that are automatically numbered by the broadcaster cannot be deleted or moved.

○RED	Deleting ChannelsSelect the channels using the ▲/▼ and OK button and press the RED button.
○GREEN	Moving ChannelsSelect the channels using the▲/▼ and OK button and press the GREEN button. Move the selected channels to the location you want using the ▲/▼ and OK button.
○YELLOW	Changing GroupTo list the channels of other groups, press the YELLOW button and select a group you want.
○BLUE	Changing BackgroundYou can change the channel displayed in the background while editing. Select the channel you want to watch and press the BLUE button.
○OPT+	Locking / Unlocking ChannelsRenaming ChannelsSelecting / Releasing All Channels

Managing Channels

Editing Favourite List

Settings > Edit Channels > Edit Favourite List

Edit Favourite List will help you add or remove channels from the favourite groups.

Group name Marked/Total channels Favourite group name Settings > Edit Channels > Edit Favourite List TV Favourite 1 1001 ZDFdokukan 1002 DISCOVERY GESCHICKL... 1003 NDR FS HH 1004 SEASONS 1005 ZDFdokukan 1006 TAQUILLA 10 1007 CINEMANIA 1008 CINEMANIA 2 1009 CINEMANIA 3 Add Group Favorite Preview Function Function buttons: Coloured or OPT+ button

Note:

• Locked channel, : Scrambled channel (CAS icons)
• Press the i button to view the detailed channel information.
• Press the TV/RADIO button to switch between TV and Radio groups.
• Press the MENU or EXIT button to exit. Press the BACK button to return to the previous screen.
• The channels that are automatically numbered by the broadcaster cannot be deleted or moved.

RED	Adding Favourite ChannelsSelect the channels to add using the ▲/▼ and OK button in the left column and then press the RED button. The added channels will be listed in the right column.Removing Favourite ChannelsSelect the channels to remove from the right column using the ▲/▼ and OK button and then press the RED button.
GREEN	Changing GroupTo list the channels of other groups in the left column, press the GREEN button and select a group you want. (TV, Radio, HDTV)Moving Favourite ChannelsSelect the channels using the ▲/▼ and OK button in the right column and then press the GREEN button.
YELLOW	Changing Favourite GroupTo list the channels of other favourite groups, press the YELLOW button and select a group you want.
BLUE	Changing BackgroundYou can change the channel displayed in the background while editing. Select the channel you want to watch and the press the BLUE button. The background channel will change.
OPT+	Locking / Unlocking ChannelsRenaming ChannelsSelecting / Releasing All Channels

TV Guide

TV Guide

You can access the TV guide in several ways.

• Press the GUIDE button.
• Press the MENU button and select TV Guide.

Information of the selected programme Current number & name, programme name, simple information, favourite group and icons Preview TV Guide 07/18 TUE 12 MAR 2012 TV 1002 Europe Europe Das Geheimnis des Aralises Deutsche, amst duypert so gref... TUE JUN 04:00-07:30 MON 11 JAN 06:00 07:00 28:00 Seasons magazine Le garage de Seasons Siberfügel Timm Th 1001 Discovery Das Geheimnis des Aralises Roots Germania 1002 Europa Europe Von Nachteulen und Fröhaufstehem 1003 Italia Receiving information N24(2) Doku: Krieg N24 Nachric.. 1004 Jettis Heute st Halten Sie, bitte! 1005 KING POLSKA 1006 Playbox Guide End Schedule Group Function buttons: Coloured button Time bar

Note:

• Press the i button to view the detailed programme information.
  • Scheduled programme

Watching Programmes

1. Select a programme and press the OK button. The programme will display in the preview.
2. Press the OK button again to exit the TV guide and watch the programme.

Setting Reminders

1. Select a future programme and press the OK button.
2. Press the OK button again to cancel the reservation.
   The reserved programmes will be added automatically to Schedule.

Finding Programmes

To find the programmes specifically according to the keyword or genre, press the GREEN button.

Scheduling Reminders

To schedule the reminders, press the YELLOW button.

Changing Group

To list the channels of other groups, press the BLUE button and select a group you want.

Preferences

Preferences

graph TD
    A["MENU"] --> B["Channel List"]
    A --> C["TV Guide"]
    A --> D["Settings"]
    D --> E["Preferences"]
    E --> F["Parental Control"]
    E --> G["Language"]
    E --> H["Time"]
    E --> I["Video"]
    E --> J["Audio"]
    E --> K["Screen Display"]
    E --> L["Label Channels"]
    E --> M["Installation"]
    E --> N["System"]

Parental Control

• Maturity Rating: You can block the programme if the programme is above the age limit.
• Change STB Password: Enter a new password.

Note:

• The default password is 0000. If you have forgotten your password, please contact your local distributor.
  • Enter the password to view the blocked programmes.

Language Setting

You can set the system language, audio language or subtitle language.

Setting Power On/Off Timer

You can set the time the receiver powers on or powers off.

Video Setting

• Screen Ratio: You can select the screen ratio of your TV
• Resolution: You can set the resolution of the screen.
• Display Format: You can select the display format according to the screen ratio of your TV.
- Letterbox & Pillarbox Colour: You can select the colour of the margin space in Letterbox or Pillarbox mode.

Audio Setting

• Digital Audio Output: You can select the digital audio signal output.
- Lip-Sync: You can adjust the sound difference between audio and video.

Screen Display

• Info Display Time: You can set the duration the i-plate is displayed whenever you change the channel.
  • Transparency: You can set the transparency of the On-Screen Display.
• Subtitle Font: You can set the subtitle font.

Installation

Search Channels [Fixed Antenna]

Installation allows you to configure your antenna and search the TV and radio channels.

MENU > Settings > Installation

1 Press the RED button and select Fixed Antenna.
Select OK to save and exit.
2 Select Search Channels and press the OK button. Select Switch Type and select LNB Onlyor DiSEqC.
3 Select a satellite figure and press the OK button.
• Satellite: Select the satellite.
• LNB Frequency: Select the LNB frequency.
• 22kHz Tone: Select the DiSEqC switch.
• DiSEqC: Select the DiSEqC switch.
- Test Transponder: Check the signal status of each transponder and select the one with the best quality.
Select OK.

Note: When Switch Type is set to DiSEqC, both 22kHz Tone and DiSEqC are activated.

4 Select Transponder under the activated satellite figure and press the OK button.

Select a value in the transponder list.

5 Select Search and press the OK button. The found channels will be listed.
6 When the search is completed, select Save and press the OK button.

Note:

• Select User Define to enter the options directly.
  • All channels will be deleted if you change the antenna type.
  • The default password is 0000. If you have forgotten your password, please contact your local distributor.

Settings + Installation (Fixed Antenna) Fixed Antenna SCD Antenna Motor Antenna OK Cancel

Set Image & Installation Fixed Antenna & Search Channels Switch Type List Only Aerial Cable Property In Design Of Search Search Sensor

Settings > Installation (Seed Kernel) > Search Channels Satellite setting Date: 01/04/2023 Time: 00:14.00:2000.0ms Duration: 5% Size: 5% OK Cancel Search Options

Settings - Installation Fixed Antenna - Search Channels Switch Type A1 Port: C:\Users\123\0.0000\0.0000 B1: 5, 223Mx.06 B2: 5, 223Mx.06 B3: 5, 17902.5.5 B4: 5, 17906.5.5 Sapiere IP地址 (IP) Sapiere Sapiere

Installation

Search Channels [SCD Antenna]

Single Cable Distribution enables the delivery of broadcast programming over a single cable to multiple users eliminating the numerous cables required to support other electronics devices. If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting. Refer to the satellite antenna manual for details.

MENU > Settings > Installation

1 Press the RED button and select SCD Antenna. Select OK to save and exit,
2 Select Search Channels and press the OK button.
3 Select SCD Setting and press the OK button to set the channel(band) and frequency for this receiver.
Tuner1: Select from Channel 1\~8.
- Frequency: The frequency is set based on the channel of tuner1. Select OK.
4 Select a satellite figure and press the OK button.
Satellite: Select the satellite.
• LNB Frequency: Select the LNB frequency.
- Test Transponder: Check the signal status of each transponder and select the one with the best quality. Select OK.
5 Select Transponder under the activated satellite figure and press the OK button. Select a value in the transponder list.
6 Repeat the two steps above to set more satellites.
7 Select Search and press the OK button. The found channels will be listed.
8 When the search is completed, select Save and press the OK button.

Note:

Select User Define to enter the options directly.
- Select Stop and press the OK button to stop the channel search.
• All channels will be deleted if you change the antenna type.
• The default password is 0000. If you have forgotten your password, please contact your local distributor.

Installation

Search Channels [Motor Antenna]

You can set the position of the satellites when you use a motor antenna for efficient channel search.

MENU > Settings > Installation

1 Press the RED button and select Motor Antenna. Select OK to save and exit.
2 Select Search Channels and press the OK button.
3 Select Motor Setting and press the OK button to set the motor type and location.

- Motor Type:

DiSEqC1.2: General motor antenna using DiSEqC 1.2.

USALS: Motor antenna using USALS.

• My Longitude: Enter the longitude and direction.
• My Latitude: Enter the latitude and direction.
• LNB Frequency: Enter the LNB frequency.

Select OK.

Note: When Motor Type is set to DiSEqC 1.2, both My Longitude and My Latitude are inactivated.

4 Select Edit Satellite Data and press the OK button to select the satellites that the motor antenna is pointing to. Select satellites using the ▲/▼ and OK button.

When selecting User Define, enter the Longitude and Direction.

Press the BACK button to save and return.

5 Select Position Setting and press the OK button to set the antenna position for the selected satellites.

• Satellite: Select the satellite.
• Transponder: Select the transponder.
- Motor Driving: Continuous – Step - Time
- Driving Size: When motor driving is set to Step or Time, select one from 1\~127.
- Go to Stored Position: Make the antenna turn toward the position of the selected satellite.
Fine-tune the position using the ◀/▶ button until the signal strength and quality reach the maximum level.
• Store Current Position: Save the adjusted position.
- Recalculate: Recalculates the positions of all satellites based on the position of current satellite.

Press the BACK button to save and return.

Note: When Motor Type is set to USALS, Motor Driving, Store Current Position and Recalculate are inactivated.

Settings Installation (Motor Antenna) Amount Type Select your own antenna Load Antenna SCD Antenna Motor Antenna OK Cancel

Settings • Installation (Motor Antenna) • Search Channels Motor Setting USALS Left Seating Data Position Setting Limit Setting Send to: Responsible Search Search Center

3 settings > Installation Door Antenna > Search Channels Motor Settings Motor Type 12454 P/Amplify 2.0KB Direction Ecc My Article 363K Direction Fuller USB Frequency 800W OK Cancel

4 Installation Motor Antenna > Search Channels > Edit Satellite Data Select Satellites for Motor Anteams APPROX 20001 ARABAT28 (56.00) ASTIN1 (53.97) ASTRO2 (50.33) ASTRA17A (51.50) BOMEN (54.00) EURABAT7 (42.00) EURIBRD1 (38.38) EURIBRD2 (33.00)

Installation

5 Satellite Transponder Motor Driving Driving Size Next Base at Store1 Position Store Cluster Position Acceleration Security Quality Actual 11/24/20 12/22, H, 22000, 2/3 Continuous 1 Fast 10%

6 Settings > Installation (Matrix Interface) > Search Channels > Limit Setting First Position Next Next Set Limits Last Reset Position

6 Select Limit Setting and press the OK button to set the operation limit of the motor. - Limit Position: Select East or West.
- Set Limit: Set the operation limit to East or West using the ◀/▶ button. - Reset Position: Initialise the position of the motor antenna to the factory default. Press the BACK button to save and return.
7 Select a satellite you want to search.
8 Select Transponder under the activated satellite figure and press the OK button. Select a value in the transponder list.
9 Select Search and press the OK button. The found channels will be listed. 10 When the search is completed, select Save and press the OK button.

Note:

• When you use a motor antenna, only the channels of one satellite can be searched.
• Repeat the search process to search more satellites.
• Select Stop and press the OK button to stop the channel search.
  • All channels will be deleted if you change the antenna type.
• The default password is 0000. If you have forgotten your password, please contact your local distributor.

Software Update

MENU > Settings > Installation > Software update

Automatic Update

1. Select Automatic Update.

2. When new software is detected, select to start the update process.

Manual Update

1. Select Manual Update.
2. Enter the search options.
3. Select Search and press the OK button to search for new software.
4. When new software is detected, select Yes to start the update process now.

Note:

• It may take 5–10 minutes to update the software.
- When the software update is completed, the product is automatically powered off and on again.

Factory Default

MENU > Settings > Installation

1. Select Factory Default.
2. A popup will appear. Select Yes.
3. You will be prompted to enter the password. Enter the password.

Note:

- The default password is 0000. If you have forgotten your password, please contact your local distributor.

Warning: Note that once you perform factory default, all user configured data will be reset. Shortly after you complete the factory default, the installation wizard will appear automatically.

System

System

graph TD
    A["MENU"] --> B["Settings"]
    B --> C["System"]
    C --> D["System Information"]
    C --> E["Signal Detection"]
    C --> F["IRDETO Software Update"]
    C --> G["Conditional Access"]
    C --> H["Mail Messages"]
    B --> I["Preferences"]
    B --> J["Edit Channels"]
    B --> K["Installation"]

System Information

You can view the system information.

Signal Detection

You can check the signal strength and quality of the searched channels.

IRDETO Software Update

You can update the software when available.

Conditional Access

You can view the Smartcard information.

Mail Messages

You can check the mail messages.

Appendix

Specification

Tuner & Channel
No. of Tuners I
Input Connector F-Type, IEC 169-24, Female
Frequency Range 950 MHz to 2150 MHz
Signal Level -25 to -69dBm
LNB Power & Polarisation	Vertical: +13.5 V (+14.5 V at high voltage)Horizontal: +18 V (+18.5 V at high voltage)Current: Max. 500 mA (Overload protection)
22kHz Tone	Frequency: 22 ± 4 KHzAmplitude: 0.7 ± 0.2 V
DiSEqC Control	Version1.0, 1.2, USALS, SCD (Single Cable Distribution)
Demodulation QPSK, 8PSK
Input Symbol Rate	DVB-S: 2~45MBaudDVB-S2: 3~42MBaud(QPSK), 3~30MBaud(8PSK)
FEC Mode	DVB-S: Auto,1/2,2/3,3/4,5/6,7/8DVB-S2: Auto,1/2,3/5,2/3,4/5,5/6,8/9,9/10 (QPSK)Auto,3/5,7/3,3/4,5/6,8/9,9/10 (8PSK)
MPEG Transport Stream A/V Decoding
Transport Stream	MPEG-2 ISO/IEC 13818Transport Stream Specification
Profile Level	MPEG 2MP@MI, MPEG 2MP@HI, MPEG 4HP@L4.1
Input Rate 15MB/s Max
Video Format 4:3, 16:9
Video Resolution 1080p, 1080i, 720p, 576p, 576i
Audio Decoding MPEG/MusiCam Layer I & II, AC3 downmix
Audio Mode Single channel/Dual channel/Joint stereo/Stereo

Memory
Flash Memory 128MB
RAM 256MB
Audio/Video/Data In/Out
Video RCA-Type(CVBS), HDMI/HDCP
Audio Audio I/R
Power Supply
Input Voltage 100-240V a.c., 50/60Hz
Type Adaptor
Power Consumption	12Vd.c. / 2A
Protection	Separate internal fuse.The input should be protected against lightning.
Physical Specification
Size	200×33×155(mm)
Weight (Net)	485g
Operating Temp 0 °C to +45 °C
Storage Humidity	-10 °C to +70 °C

Note: The specifications are subject to change without notice.

Appendix

Trouble Shooting

Before contacting the customer service centre, make sure to read the tips below carefully. If the problem persists after you complete the following procedure, please contact HUMAX customer service for further instructions.

1. No message is displayed on the front display. (The product will not switch on.)

2. Check the main power cable and make sure it is plugged into a suitable power outlet.
   • Check that the mains supply is switched on.

3. Connect the power cable to a different power outlet.

4. Check that the power switch is on at the rear of the product. (where applicable)

5. No picture

• Make sure that the product is powered on and in operation mode. (Press the STANDBY button)
- Make sure that the AV cable is firmly connected to the TV. - Make sure that the antenna cable is properly connected to the product.
• Be sure to activate channel search.
• Check the brightness level of the TV.
• Check if the channel is currently on air.
• Make sure that STB or PVR is selected as input on the remote control.
• Make sure that the antenna setting in the menu is correct. (satellite only)

1. Poor picture/sound quality

• Make sure there is no mobile phone or microwave oven near the product.
- Keep the power cable and the RF cable apart from each other.

Note: If the antenna is covered with snow or the RF is weakened by heavy rain, the condition of the sound and picture may temporarily be poor. However, poor sound and picture quality due to weather conditions cannot be accepted as a malfunction of product.

[Satellite]

• Change the satellite dish for a larger one as this will increase the signal levels received.
• Replace the LNB with a lower noise factor in cases where the noise factor is too high.
• Replace the LNB with a lower noise factor in case the noise factor is too high.

GB20

• Replace the LNB with a new one in case it is damaged or out of order.
  • Install the antenna in an obstacle-free place.
• Check the signal levels and adjust your antenna if the level is too low. The signal level may be affected by weather conditions.

[Terrestrial]

• Adjust the antenna direction to get a better picture.

• Set the antenna power in menu to On, if you use the active antenna to improve the reception. (where applicable)

• No or poor sound

• Check that your AV cable is connected correctly.
  • Check the volume levels of your TV set and the product.

• Check if the product or TV is on mute.
  • Check audio type or soundtrack option. (where applicable)

• Remote control does not operate.

• To control the product, the top end of the remote control should point directly towards the receiving part of the product.

• Remove and reinsert the batteries in the remote control.
• Replace the batteries in the remote control for a new set.

• Set the remote control to STB or PVR mode, if you are using the universal remote control. (where applicable)

• Cannot make reservations.

- Check that no previous reservations are conflicting with the new reservation.

1. No password information is given.

The default password is 0000.

1. Channel search does not work.

2. [Satellite] Make sure that the antenna setting in the menu is correct.
   • [Cable] Make sure that your cable is connected correctly.

3. [Terrestrial] Use the appropriate antenna capable of receiving VHF or UHF channels for your area.

4. Cannot update new software.

- If the product does not show a message requesting update, this means no software is available.

Appendix

10. Cannot watch scrambled channels.

• Check that you have the appropriate Smartcard or CI-Module. Reinsert the Smartcard or CI-Module and make sure it initialises correctly.
• Check in the menu that the product is detecting the Smartcard or CI-Module.
• Check in the menu that you have a valid subscription to the channels you want to view.
  • Make sure that the Smartcard or CI-Module is not damaged.

11. Cannot watch pay channels.

- Check in the menu that you have a valid and working subscription to the channels you wish to view.

12. The product makes a humming noise.

• The noise is from the fan; the hard disk is operating normally.

13. Cannot record programmes. (PVR only)

• The hard disk is full. Delete unnecessary programmes and make space for new recording.
• Check if the recording conflicts with another channel. Stop the current recording or wait until the recording is finished.
  • Check that the product is switched on when the recording starts.

14. Cannot operate Time Shifted Recording. (PVR only)

• TSR may not be available during recording. Wait until the recording is finished.
- Delete unnecessary programmes and make space for new recording.

15. Cannot playback. (PVR only)

• To playback the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time since you last recorded, this may not work. Contact the product distributor.
  • The signal during recording may be weak or the hard disk too full.

16. Cannot change channels while recording. (PVR only)

- Certain channels may not be changed due to restriction of the tuner or connection type.

HUMAX Customer Support

Information concerning troubleshooting, software upgrade and product support is provided in the following website. Should your product require warranty service, please contact the customer service center of which telephone number is on the website.

Middle East(Dubai, UAI)	Tel:	+9/1 4 359 2323
	Opening Hours(Closed on Fri):	Sat-Wed: 09:00-18:00Thu: 09:00-14:00
	E-mail:	[e-mail]
	Website:	http://www.humaxdigital.com/me/support
	Language:	Arabic / English

Note: For hardware repair, please visit our website.

Appendix

Error Messages

Error messages Possible causes What to do
No or bad signal [Satellite]	The satellite dish is not pointing at the satellite.	Adjust the dish alignment.
	Signal is too weak.	Increase the LNB voltage or connect a signal amplifier.
	Satellite dish is too small. Change to a larger dish.
	Problem with LNB. Change the LNB.
	Wrong antenna setting Set the antenna correctly.
No or bad signal [Cable]	The cable is not connected.	Make sure the cable is connected correctly.
	The cable may be damaged or defective.	Replace the cable.
	The channel is not broadcasting.	Replace the cable.
No or bad signal [Terrestrial]	The aerial is not pointing correctly.	Adjust the aerial. Check the cable from the aerial. If you cannot resolve the problem, request a professional to test your aerial installation.
The channel is scrambled or not available.	The channel has a signal but no audio or video.	Check if the channel is currently on air.
	The channel has been deleted by the broadcasting company.	Check if the channel is currently on air.
	The channel is for data broadcasting.	Remove the channel from the channel list and check for new transponder details.
The audio is not available.	The channel has a video signal but no audio.	Press the audio button to confirm that the channel has audio options.

Error messages Possible causes What to do
No access	No access	Make sure you have a subscription to the channel.
	No authorisation	If the product has been in standby or power off for a long time, please wait for authorisation. It may take up to 60 minutes.
No card inserted Smartcard is not inserted. Insert the Smartcard.
Incorrect card	Wrong Smartcard is inserted.	Insert the correct Smartcard.
	Smartcard is not inserted correctly.	Remove the Smartcard and reinsert it.
	Smartcard is damaged.	Contact your Smartcard retailer or channel broadcaster and ask for replacement.
CI-Module not installed	CI-Module not installed CI-Module is not inserted.	Insert the CI-Module.
	CI-Module is not inserted correctly.	Remove the CI-Module and reinsert it.
	CI-Module is not recognised.	Insert another CI-Module to check if the current one is working.
Invalid CI-Module	Wrong CI-Module	Insert the correct CI-Module
	CI-Module is damaged. Replace the CI-Module.
The antenna cable is short-circuited. [Satellite]	LNB cable is short. Replace the LNB cable.
	LNB is internally short. Replace the LNB.
	Alien substance is inserted into the LNB IN port. The port may be damaged.	Remove the alien substance and contact the service centre if the port is damaged.

Appendix

Glossary

CVBS (Composite Video Baseband Signal)

A technology for transmitting video signals via a cable. Mixes luminance (brightness) and the chrominance (colour) signals together.

DiSEqC (Digital Satellite Equipment Control)

A DiSEqC compatible receiver relies on a switching box which detects the 72kHz tone pulsing rapidly on and off. In this way, a certain receiver can control numerous LNBs through a DiSEqC switching box.

Dolby Digital

An encoding system that digitally compresses up to 5.1 discrete channels of audio (left front, centre, right front, left surround, right surround) into a single Bitstream. A low frequency effect (LFE) channel is included providing the sound needed for special effects.

DVB (Digital Video Broadcasting)

A set of standards that define digital broadcasts using satellite, cable or terrestrial systems.

EPG (Electronic Programme Guide)

An electronic equivalent to a printed television listings magazine. It is an application used with digital set-top boxes and digital television sets to list current and scheduled programmes that are or will be available on each channel, including a short summary or commentary for each programme. The information supplied in the EPG is sent and updated by the channel broadcaster.

FEC (Forward Error Correction)

A technique for error control of data transmission.

Frequency

The property of a signal measured in cycles per second ( =H_2 ).

FTA (Free-To-Air)

An unscrambled broadcaster allowing customers to view channels or services without paying any subscription.

HDMI (High-Definition Multimedia Interface)

An all-digital audio/video interface that supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio.

LNB (Low Noise Block)

A device that is mounted on an arm facing your satellite dish, focusing on satellite signals. A LNB converts signals received from satellite to a lower frequency and sends them to a satellite receiver via coaxial cable.

OTA (Over the Air)

A standard for the transmission of software for equipment, through a broadcast system. Manufacturers reserve the right for deciding the release of the software for their products.

Polarisation

The direction of the electrical and magnetic fields of a signal. Satellites use both vertical and horizontal polarisation, meaning that a frequency can be used twice.

QPSK (Quadrature Phase Shift Keying)

Digital modulation technique in which the carrier phase can have one of four possible values.

RF (Radio Frequency)

Television signals are modulated onto RF signals and are then demodulated by the tuner of your TV or STBs.

RGB (Red - Green - Blue)

A technology for transmitting video signals via a cable. RGB is a system to represent red, green, and blue colours on a TV or monitor display. Red, green, and blue can be combined in various proportions to obtain any colour.

Smartcard

A credit card sized card that contains updateable chip memory. It is used to access Pay TV (encrypted) channels or services.

S/PDIF (Sony/Philips Digital Interface format)

A standard format for the transfer of digital audio signals. It allows the transfer of digital audio between two devices without any conversion to and from analogue, which could degrade the signal quality.

Transponder

A satellite is divided up in parts called transponders. A transponder is one distribution section of the satellite. Each transponder can be used for distribution of several channels or services.

Appendix

Open Source Software Notice

THE WAX products are retain open source operating software distributed pursuant to GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL LICENSE Version 2.1 each as defined and published by The Lee Software Foundation, Inc.

The following GPL and LEPL software source codes used in this product can be provided and this offer is valid for up to three years from the date of original download or the software or purchase of product containing such software. Please contact: over [e-mail].

GFL Software

||748

busybox

chyp

2018

HDF21

This package, the exit file system and key, are made available under the GNU Public License version 2 with the exception of the IBoxIDs and IBox libraries, which are made available under the GNU Library General Public License Version 2, the Iboxus library which is made available under a ISO-style license and the IBoxes and IBox libraries which are made available under a MIT style license.

LGPL Software

uClibc

ll next

(1) E

The following text in the table is [Tama]

15.30.29:38-1.32P-10017

freelyp

For things of this software are copyright © 2007, The FreeTime Project

www.veetvocrol

1. rights reserved

2

Use modification and redistribution of the Open Source Software is governed by the terms and conditions of the applicable Open Source License. The GNU General Public License (EFL) is shown below.

The GNU General Public License (GPL)

Version 2 June 1991

Copyright, CA 1965, 1991 Free Service Foundation Inc. Franklin Street Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it by contrast the GNU General Public License is intended to quantify your "sccoom to share and change free software." I make sure the software in line for all users. This general Public interest applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it (some other Free Software Foundation software is covered by the GNU Lesser General

Public License is issued. Your application in your programs, law. When we speak of free software, we are referring to freedom not price. Our General Public License is designed to make sure that you have the "recomit" to distribute copies of free software and charge for this service if you wish, but yourself provide code or gate. If you went it, thus you can change the software or use pieces off it in new free programs, and then you know you can do these things.

to protect your rights, we need to make restrictions that force anyone to deny your these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the language, or will probably be

For example, I can distribute copies such a message, whether your answer for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them three terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this software. If the software is modified by someone else and passed on, we want its recipients to know that what they agree, is not the original so that any problems introduced by others will not reflect on the original authors' medications. Finally, are free program it is required constantly by software patients. We wish to assist the charger that redistributes a free program will individually obtain a patent licence, if the most important program proprietary to prevent it, we have made a clear that any payment must be incurred for everyone's see job or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

1. The license applies to any program or other work which contains a notice placed by the copyright holder stating it may be distributed under the terms of this license (a full License). The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law that so say a work containing the Program or portion of it, either verbalising or with modifications and而不ated into another language, it can be translated into without limitation in the term "modification" each license is displayed as "yes".

Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if it contains a constitute a work based on the Program independent of having been made by running the Program's whether that is true depends on what the Program does.

1. You may copy and distribute verbal copies of the Program's source code as you receive it, in any medium, provided that your procedure is appropriately published on each copy an appropriate copy or notice and to find information when keeping actual information, then to the License and to the absence of any warranty, and give any other recipients of the Program a copy of this License along with the Program. You may change a fee for the physical act of transfer in a copy, and you may at your original written copy, but in order that being able

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and co- and distribute such modifications or work under the terms of Section I above, provides that you also meet all of these conditions.

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

In your mail cause any work this, you distribute for publish that in whole or upset: otherwise it is ever seen from the Pugam or any part thereof, so be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modifi e program normally uses currency, interactive when run, your trust cause it, when started running for such interactive use in the most ordinary way to print or display an announcement including an approximate copyright notice and a notice that there is no warranty for either, saying that your purpose is canonical; that uses may restructure the program under these conditions, and telling the user how to view a copy of this license. Except that the Program bell is interested but does not normally print such an announcement, your work based on the Program is not required to print an announcement.

these requirements apply to the modified work as whole (if intended) sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in order to, then this License, and to terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same section as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licenses extend to the entire whole, and thus to each and each part regardless of your written

This is up the intent of private tax claim rights can be carried by your rights to work within entirely by you rather than the intends to overcome the right to control the distribution of available or collective works based on the Program in which it, some aggregation of another work not based on the Program with the Program for a work based on the Program's volume of a storage or distribution medium does not bring the other work under the scope of this license.

1. You may copy and distribute the Program for a work based on 1, under Section 2 in object code or executable form. Under the terms of sections 1 and 2 above provided that you also do one of the following:

a) Accompany 1 with the complete corresponding machine-stable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customally used for software interference; or, by Accompany 2 with a written offer, valid for at least three years, to

go are that party, or change no more than your rest of physical pacing source distribution, a component matching reads the copy of the product. The system is not to be used for any other part of the material and active on a return designally used. For software interchange of A company, with the information you see as to the sites to directors corresponding to source code. If this changing is allowed only for the use of the product, it is not possible to be used in the case of equal or equal time form with such an use in such a case of solution on body. The service spoke for work means the ordered from the book for making modifications to a higher level, stable work, complete work, and the same process is made by the same way which the definition includes the ships used to control comp learning and installation of the accessible. However, as a special exclusion, the system will be obtained need not include any right of a procedure. It is also distributed in each of the components (complears, cars, and so one of the operating systems on which the accessible units, unless that company itself accounts the property, or any other part of the operation access to copy from my accessories place, then offering equivalent access

to copy the source code from the same place counts as distribution of the source code, even though third parties are not cancelled to copy the source along with the object code.

1. You may not copy, modify, subscribe, or distribute the Program except as explicitly provided under this License. Any attempt to copy, modify, publicing or distribute the Program is working, and will automatically make your rights under this License. However, parties who have received copies, rights from you under this License will not have their licenses to notice any other such parties remain inful compliance. 5. You are not required to access the License, since you have not granted it. However, making the company permission to modify our license.

the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program for any work based on the Program, you indicate your acceptance of the license, works, and all its Name and condition for copying, distributing or modifying the Program or works based on it.

1. Each time you read to the Program for any work cases on the Program, the recipient automatically receives a license from the original licitor to copy, disquote or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients even be of the right granted herein. You are not responsible for obtaining compliance by third parties to this License.

2. If as a consequence of a court, judgment or allocation of patent findings, or for any other reason (not limited to patent issues), conditions are increased on you (after her by your order, agreement and other orders that can align with the conditions of this notice, they do not exercise you learn. Conditions of this License, if you cannot distribute so as to satisfy arbitrary validity your slight orders under this notice and any other pertinent obligations, there as a consequence you may not be distributed in the Program or all. For example, if a patent license should not permit authority to receive the claim of the Program for all these who receive copies or calls or under each through you, or otherwise, please call the number of patents to any other person. This document will be obtained from the European Bank incorporated by

section is not real or unfavorable and/or particular circumstances, the balance of the section is intended to apply and the section at a whole intended impact in other clinical conditions. It shall be the purpose of this section to induce you to improve any patents or other property rights claims or to correct validity of any such claims. This section has the sole purpose of applying the scope of the software for its system which is implemented by public license practices. Many people have made general contributions to the wide range of software distributed through their own material. The use of this section may be a technical work done to be all or the well-being, including software through any other items and a less cause cannot present that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license.

In the statement of Argentina use the Program's license in this country or other by parents or by copyright interfaces, the original copyright holder who declares the Program under this license may add an explicit geographie distribution for its reader, excluding those countries, such distribution is permitted only in any countries not this stock sold, in such case, this License Incorporates the limitation as if written in the body of this License.

1. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in sport to the present version, but may differ in detail to address new problems or concerns.

Each version is given a guiding publishing version number. If the Program specifies a version on number of the License, which applies to it and "any last version," you have the option of following the terms and standards, either of that version or of any last version published by the Free Software Foundation. The Program does not specify a version number of the License, you may choose any version over published by the First software Foundation.

1. If you wish to incorporate parts of the Program into other free programs, whose distribution conditions are different, write to the author or to ask for commission. For software which is copyrighted by the Free Software

Foundation, while to: the Free Software Foundation we sometimes make exceptions for this. Our decisions will be guided by the two goals of preserving the free status of all derivatives of our free software and for promoting the sharing and reuse of software generally.

NO WARRANTY

IT. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE EXCEPT WHEN OTHER FROM WRITTEN IN PARTING THE COPYING IT HOLDS AND/OR OTHER PARTIES FROM THE PROGRAM "AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSSED OR

IMPLIED, INCLUDING, JUST INJIMES OF THE IMPUBLIC WARRANTIES OF MACHAN ABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTERPRISE AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAMS WEIH YOU SHOULD THE PROGRAM PHONE CONTACT TO YOU ASSUME THE COST OF AT THE YEAR SPINICUM (APPLIC OR COCONITION) IS IN THIS LIMITS REQUIRED BY APPLICABLE NOLOGY.

TOIN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY

WHO MAY NOOCEY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, RELIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INDUSTRIAL TOPS, CONSOLINA, DAMAGE ATISING OUT OF THE FUTURE OR IMABILITY TO LET THE PROGRAM INCLUDING BUT NOT LIMITED ITEMS OF DATA OR DATA BEING REPIERED INAGGULATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS, OVER THE SUCH HOLDER OF OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LABRICS.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

I you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. Today, we start the following notes in the program, it is given to all such them to the start of each source files to most effectively convey the excursion of warranty, and which the should have at least the "copyright" line and acquire to where the full notice is found.

The instructions for the program name and a brief copy of what it does. Copyright © lvyty, name of author. This program is free software, you can tell us more and/or modify under the terms of the CPU General Public License as published by the Free Software Foundation, at this version 2 of the license or (at your own any interversion. This program is set focused in the hope that will be useful, our WITHOUT ANY WARRANTY, without any other relevant MERCHANT Activity or THISSEPTS A

PARTICULAR PURPOSE: SEE THE GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. I'm not to see the Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02, 19-1901, JSA. Also add information on how to contact you by electronic and paper mail. The program is interactive, make it out a short notice like this when it starts in an interest file made.

Gromovision Session 69 Copyright XY General of author Gromovision comes with ABSOLUTELY NO/WARRANTIC for details type: show w. This is free software, and you are welcome to redistribute it under certain condition type: know? To check

The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called scantelling other than allow w and show c; they could even be mouse clicks or menulents whatever suit your program. You should also get your smileer if you work as a programmer, or your skill, if any, to sign "copyright declaration" on the program, it necessary. Let us vingle all the names.

Yorody's, Inc. Foreby deskims at copyright interest in the program "Homovision (which makes passes at complears) written by James Lacker signatures of Te Curr. 1 April 1989

1yC301,HeJ58H129E

The General Public License does not permit incorporating your program into public library programs. If your program is a subroutine library, you may consider the people useful to permit finding appropriate applications in the library. This is what you want to do use the GNU Library General Public License (which is adopted of this license).

GNU Lesser General Public

Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110. By: USA Everyone is permitted to copy and distribute verbal copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPU. It also counts as the successor of the GNU Library Public License version 2, hence the vers on number 7.1.]

Preamble

The licenses for most software are designed to take away your freedom

to share and change it, by contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specialty designated software packages—typically for a key or the free software foundation and other parts who decide to use it, you can see it too, but we suggest you just think carefully about whether this license or the ordinary General Public License is the better strategy to use. In any particular case, the license will be applied to the same material of the license, so that we are referring to freedom of use, not price. On General Public License, as designed to make sure that you have the freedom to distribute copies or free software and charge for this service if you wish that you receive source code or can get it. If you want it that you can change the software and then pass it in the new free programs, and like you are information.

restrictions that fatal distributors to show your these rights on to ask you to surrender these rights. These restrictions include to set forth responsibilities for you if you distribute copies of the library or if you mostly it. For example, if you distribute copies of the library whether grat or for a fee, you must give the ten equivalents at being this that we give you. You must choose water that they, too, re-hive to can get the cheaper code. If you link other codes with the library you must provide complete copies for the recipient.

Appendix

so that they can link them with the library after making changes to the library and recamping it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: drive copyright, the library and PO were you the library, which gives you legal permission to copy documents and/or modify the library. To protect each distributor we want to make a very good that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's regulator or will not be affected by problems that might be introduced by others.

In fact, software rights may be a constant threat to the equipment and repair program, we wish to make sure that our company cannot effectively restrict the requirements of the system. The system is not necessary for any other operation or other order, but we insist that any patent license obtained to be varied by the library may be considered as the full framework of use sites in the library, Vase2W, software, including generic library, is covered by the system to ensure that the system is suitable for the public library. I create agents to retain designed libraries, and is quite different from the ordinary General Public library we use the library on certain areas. We use the library to obtain a complete degree of knowledge about the library. When program links with library, when the facility is running, a library, the collection of the two is legally seeking a control of work a derivative of the original library. By ordinary General Public library, we will also provide a general view of the organization. There are several other branches of interest in connecting other sites with the library. We call to be one the “land” General Public Library. In addition, we will also provide a similar view of the library and the daily General Public library. This also provides other free software developers less of an area stage over compelling non-top programs.

In particular special cut, limitations. For example, one or more occasions, there may be a set of notes to encourage the sealed possible use of acceptable lists, so that it is necessary to do standard. The effective not first uses the same number of items in the library. There are two different orders: the same job as wide practice number listation. In the case, there is little to gain by limiting the nice library to free software only, so we use the Lower General Public License. In other cases, permission too so a partial library in the lower programming areas, a greater number of people can use the same number of items in the library. This is a GUL- Library in non-free programs grabs many more people to use the whole格力 operating system, as well as various, the GUL- Inc. and operating ways. Although the third Green Public (GUE) has a previous line of the large account layout and the space of a program that is linked to the GUL- Library. It is also using arbitrary expansion of the library. The proper for making decisions, so buying duplication and creation of lists. Pay less often on the difference between a weak class on the library and a work that acts on the library. It is also a very useful property, where there is a latter must be combined with the library number in sum.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

1. His License Agreement applies to any software library or other programs to which contains a reader placed by the copyright holder or under different protection schemes. The authors are subject to the "Library" and include said "the Library." Each license is addressed as: your "Library" means a collection of software functions and/or an appropriate to what is necessarily preferred with explicit notation in which, some of these functions and logic for mechanical systems, or any other function, may be used to provide information that has been distributed under these terms. A weak basis on the library's means other the Library or any derivative work together except if law that is large, or not limiting the library or a portion of the library, or so far from the library, or otherwise only makes any language, information, and make it a material without limitation in the term "modification." Some code book notes meant the interested form of the work for making difficult part. For books, complete source code, and complete source code. These works are described in this paper, printing or using all of the compilation and installation of the library. Activities other than copying, distribution and modification are not covered by the projects, they are unclear its scope. The library does not use any such a copy of the library such a program is always only for contents. Use weak basis on the Library independently of the use of the library and tool for writing. Whether, it is one degree another. The library does not what the

2. You may cow and distribute obstains copies of the Library's complete source code as you receive it, in any medium, provided that you consider a copy and appropriately publish on this copy an appropriate copyright notice and this letter is warranty-keeping at the note, as there refer to this license and to the absence of any warranty, and distribute a copy of the License along with their Note. You may change a fee for the physical act of being a copy, and you may all your use or offer warranty protection in exchange rates after

3. You may modify your code or codes of the Library or any portion of it. thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section I above, provided that you also meet all of these conditions.

at the modified work must, it will be a software library. By you must cause the files modified to carry prominent not co stating that you changed the files and the date of any change. If you must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license.

dis a facility in the modified Library of a factor of data to be applied by an application program that uses the facility, other than an arrangement of owners, if the facility is involved, they are not trained on the site. The facility is designed for all purposes and such functions or tasks, the facility still operates, and performs whatever part of our purpose remains meaningful, it is possible, a function in a particular way to be used. The facility is defined under conditions of the application. Therefore, Subsection, all requires that any application-supplied hand on or before used by this function must be optimal if the application does not support it, the square root function is necessary to be used. If the facility is required, the area of work as a whole, the other above supports of that work are not derived from the library, and can be relatively more likely to be used and not used. For example, the facility is designed for these operations we will be distributed upon those orders to serve districts where as separate works. But when you do substitute the same section as part of who is a work based on the library, the facility is designed for all purposes and has been made and thus to each and every part regardless of who wrote it.

This is for the first section of Section 4 to mark its right to work written entirely by your rights, the intent is to even be the right to control the district of per capita or collect we works based on the Library. In addition, more aggregation of a other work not based on the Equity with the Equity for a weak based on the theory, on a volume of a storage or distribution in medium does not bring the other weak under the scope of this License.

1. You may not apply the terms of the ordinary GHL General Public License Inerted in this license, a copy copy of this license. Do you have must alter all the notice that refer to this License, so that they refer to the ordinary GHL General Public License version 2, instead of this License, if a new version then version 7 of the ordinary GHL General Public License has appeared, then you can qualify that version instead if you wish it do not make any one of drugs in this notice. Once it is changed, I made an important copy of this license, and I did not take into account for the entire first file. The sale will be taken as follows: (1) purchase and derivative works made from the price to use which the property is sold to the copy out of the code of the purchase in a program that is a law.

2. You may copy and disclose their library for a portion or faster for all, under Section 2 in other code or executive form under the Internal Sections I and 2 above provided that you accompany it with the complete corresponding machine to access your code, which must be distributed under the list of Sections I and 2 above on a medium customally used for software interchange. It distribution of object codes is made by offering access to copy from a designation place, then offering equivalent access to copy the source code from the same places satisfies the requirements to distribute the source code, even that they did not compete to copy the source along with the code scope.

3. A program that contains no derivative of any section of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Super works in legislation is not a derivative work of the library, and therefore falls outside the scope of the License. However, working a work that uses the Library with the Library creates an executable this is a derivative of the Library (excuse it contains portions of the library, rather than a work that uses the library). The executable is therefore covered by this License Section 6 states terms for distribution of such requirements.

When's work that uses the Library uses material "on a paper" that is part of the library, the object circle for the work may be a derivative work of the library even through the source scope does not, either this is true in easily, so it can it be seen to be linked out from the library, or the work is necessary. The object circle is also known as the library, and if such an object is used only numerical parameters, data structure, groups and accessors, and small matrices and final line functions, then lines are on English, then the use of the object like is unessential regardless of whether it is equally a derivative work. Executables containing this object could be due to some of the library will still fall under section 10. Otherwise, I did work a derivative of the library, you may only have the object circle at the work under the terms of Section 6. Any objects being found in the library are within Section 4, whether or not they are closed directly with the Library, not

1. As an exception to the Section above, you may also correct or infer a "work that uses the Library" with the Library to produce a work containing parks of the library and distribute this work under terms of your change provided that the items permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each code of the work that the library is called in line that the library and its use are covered by this cense. You must supply a copy of this license. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this license. Also you must purchase her interests.

at Accompany the work with the complete responding machine readable sources code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and 3 the work as an open within the library with the library with the

complete machine, readable. Work that uses the Library, as object code and/or source code, so that the user can modify the Library and then link to produce a modified executable containing the modified library. It is understood that the user who changes the contents of definitions lies in the library will not necessarily be able to recompile the application to use the modified definitions.

(1) Use a suitable library bank in place with the time. A suitable mechanism is one that (1) uses at run time 3 o'clock of the library already present on the user's computer system, either than copying library functions into the use area, and (2) will achieve properly with a modified version of the library. It is also to be used for the organization of the version in a practice company of the version that the work was made with a company the work with an end until, likely for all years, three years, to give the same use of the materials specified in subsection 4 above, for a charge no more than the cost of performing this distribution. If the distribution of the work is made by offering access to copy from a specific material or the product access to apply the above specified material listed in the same place.

c) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Libors" must include any data and all by program needed for reproducing the exocurals from it. However, at a special occasion on, the materials to be dedicated should not include anything this is normally clath based in either source or binary only with the major component (pencilier, secret), and so on of the ejecting system on which the exocurals run, unless that component shall accompanies the executable.

It may happen that this regime cannot satisfy the license-revised must other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executive that your directorate.

1. You may place library facilities that are a work-based on the library side by side in a single library together with other library facilities not covered by the license, and distribute such a combined library, provided that the service distribution of the work based on the library end of the other library facilities is otherwise committed, and provided that you do these two things.

a) According to the combined library with a copy of the same work based on the library, uncombined library other libraries built. This must be distinguished under the terms of the Sections above.

b) Give a comment notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the

accompany uncommends for the other bank. & You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under this License. Any operator otherwise to copy, modify, sublicense, link with, or distribute the library is used, and will automatify terminate your rights under the License. However, parties who have received copies, or rights, from you under, this license will not have their licenses terminues to long as such parties remain in full compliance.

1. You do not require to accept this license, since you have not signed it. However, nothing else giant you consider to modify or distribute the Library or its derivative works. These options are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library for any work based on the Library, you indicate your acceptance of this I create to do so, and all its items and conditions for copying, downloading or modifying the Library or works pass on it.

2. Each time you read a lecture the Library for any work based on the Library, the recipient automatically receives a license from the original license to copy, distribute, this will be modified by the library subject to here-to ms and conditions. You may not impose any further restrictions on the reader to disclose or the rights granted by us. You are not responsible for enforcing compliance by third part with this license.

In fact, as considerable to a fair, purpose of declaration of that file infringement or for any other reason not limited to content issues, conditions are imposed by your check or by court order, agreement or otherwise, and the number of items required to be issued by the Bank of New York, which is subject to the conditions from the conditions of this License. If you cannot distuse so as to satisfy simultaneously your degener on under the License and any other certain obligations, then as a consequence you may not disture the Library at all. For example, the patent license would not permit any where used to fix or use of the library by all those who receive policies directly or indirectly through you, then the anyway way you should qualify each law and this license would be to restore duties from distribution of the Library if any portion of this document is fixed or unencorable under any particular circumstances, or shall not be intended to apply in other circumstances. If you are purposes of the

section to reduce you pointing any patents or other property rights claims or to correct validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public law. Many people have made previous contributions to the wide range of software distributed through that system, instance on consistents application of that system is up to the actual decision to decide if he or she is willing to distribute software through any other system and licenses cannot increase their choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

1. The distribution sector of the Library is excluded in certain countries either by patents or by copyrighted interfaces, the original copyright holder who pleases the Library under this license may add an explicit geographical distribution litigation excluding these counties

to not distribution is permitted only in any other country, not that excluded. In such case, this License incorporates the limitation as if written in the body of this License.

1. The Tree Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in the all-new new providers or concepts.

Each version is given a distinguishing version number of the Library specifies a version number of the logo which applies to it and "any Irelandversion," you have the order of following the terms and conditions either of that version or any level versions published by the free Software Foundation. The theory does not use by a large version number, you may choose any version over published by the free Software Foundation. If you wish to incorporate parts of the library required free programs whose distribution conditioning are otherwise with these words in the English version. You can also be used to create a new version by the free Software Foundation on this to the best software base built out as some time make exceptions for this. Our decision will be guided by the

vec goals of pertaining the free status of all derivatives of a free software and of promoting the sharing and reuse of software generally:

NO WARRANTY

I, BECALE 1. LIBRARY SICKED DIRECTION CHARGE, ITRES IS NO WARRANTY FOR REPLYARY TO THE EXTENT PERMITTED BY APPROPICAL LAW, EXCEPT WHEN CHEMISTRY IS RATING INVERTING. THE COPYRIGHT CHECK IS ANOCCIÓN OF THE PARTIES PROCESO THE LIBRARY ASIS WITHOUT WARRANTY OF ANY INC. ITHE EXPRESSED CRIVITID, INCLUDING, BUT NOT LIMITED TO THE IMPIED WARRANTIES OF MERCHANTABILITY AND JUSTICE OR APPLICABLE PURPOSES. IF THE WORK AS IS TO THE QUALITY AND RESPONSIBLE INFORMATION, THE LIBRARY AS IS YOU SHOULD BE USED IN THIS manner. ALL ASKS OF THE COST OF ALL INCESSORY SERVICIO DE PAPER OF CORPION

1. IN NO EVENT, ANLESS SECURED BY APPLICABLE LAW OR AGREED TO PREVENT THE ORDER OF THIS DOCUMENT. ANY OTHER ORDER IS PERMITTED FROM THE LIBRARY AS PERMITTED ORDER BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SOCIAL PROCEDURE OF A CONSTITUTIONAL COMPARATING OUT OF THIS ORDER TO USE THE LIBRARY INCLUDING NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED OR LOCATE OR LOCESS SUSTAINED BY YOU OR THESE PARIES OR AT ALL OF THE LIBRARY IS PERWAL WITH ANY OTHER RESTSELLS BY YOUR SUCH ORDER FOR THE PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms for, alternatively, under the terms of the ordinary

To apply these terms, attach the following notices to the library. It's safe to attach them to the start of each source file to most effectively convey the exclusion of wages and each should have at least true copyright for and a position to whine line all kinds of found, one line above the library's ranks and on close of what it does? Copyright (or year) name of a class in the library has two software you can read into it and modify it. The label the item is the 'the first' or 'second' file that is available by the library. The book is also available for 21 of the books. The book is not only a longer open on any longer open on this library is distributed in the hope that it will be useful and will OUT. ANY WARRANTY can be used. The letter your only or MACH AND TO IT TEN IS FOR PRECITING PURPOSE. See the

You should have received a copy of the GNU Larger General Public License along with this Expiry, if not to write to the Office Software Foundation, Inc. at Franklin Street, Fill-in-Focal Button, R\$ 2013-1301 TSR. Also what information on or how to contact you by electronics and paper. You should also get your employer if you work are contracted or your school, library, to signal a copyright disclaimer for the Expiry, if necessary. I see is a sample, at the times. Youbody, Inc. Fordy desktops all copyright interest in the Library Prob. (Expiry) book writing money will be from French Bancorp Bank.

Signature is to you, April 1940. To you President of the

Warranty Certificate

IMPORTANT:

Keep this Certificate together with the Original invoice or receipt in a safe place and show them to the retailer or place of purchase whenever a warranty repair is necessary.

• Model No.:
• Serial No.:
  • Date of Purchase:
  • Dealer's Signature:
• Customer's Signature:

HUMAX thanks you for your recent HUMAX product purchase.

For your benefit, we recommend that you record your serial number, found on the product, and other purchase information on this card and keep it with your personal records, along with proof of purchase. This information will allow us to better serve your needs.

■ WARRANTY CONDITIONS

Keep this Certificate together with the original invoice or receipt in a safe place and show them to the retailer or place of purchase whenever a warranty repair is necessary.

■ HUMAX CONSUMER WARRANTY

HUMAX warrants this product to be free of defects in materials and workmanship, subject to the conditions set forth overleaf.

CONDITIONS

1. The HUMAX Warranty is valid for a period of one year from the date of first purchase.
2. In the event that this product fails to function properly during the warranty period, the retailer or distributor will make this product capable of operating for the purpose of which it was designed, without charging for labour and parts.
3. This warranty will be honoured only if the Warranty Certificate has been duly completed by the purchaser and is presented to the retailer with the original invoice or receipt.
4. This warranty does not cover shipping or transportation charges from you to us.
5. The obligations of the distributor are limited to the repair of defect parts. Costs and risks of transport to the retailer as well as removal and installation of the product, and any other costs directly or indirectly related to its repair, are not covered by the warranty.
6. All warranty repairs performed by non-authorized repair shops will not be reimbursed and if such repairs damage this product such damage will not be covered by this warranty.
7. This warranty is not applicable in cases other than defects in materials or workmanship and, in particular, does not cover:

a. periodic check-ups, adjustments, maintenance or conversions as well as replacement of parts due to normal wear and tear;
b. damage caused by accidents, negligence, modifications, use of non-HUMAX parts, improper use, installation or package;
c. damage caused by lightning, water, fire, acts of war, public disturbances, incorrect mains voltages, incorrect ventilation or any other cause beyond the control of the distributor;
d. products where the label bearing the serial number has been removed, defaced or is illegible.

1. This warranty is offered to any person who has legally obtained possession of this product within the warranty period.

2. HUMAX's maximum liability shall not exceed the actual purchase price paid by you for the product. In no event shall HUMAX be liable for special, incidental, consequential or indirect damages.

Middle East (Dubai. UAE)

Tel:	[phone]
Opening Hours:	Sat – Wed : 9:00 – 18:00
(Closed on Fri)	Thu : 9:00 – 14:00
E-mail:	[e-mail]
Website:	http://www.humaxdigital.com/me/support
Language:	Arabic/English

Certificat de garantie

IMPORTANT!