UR2160 - Radio Soundmaster - Free user manual and instructions

USER MANUAL UR2160 Soundmaster

soundmaster® highline

MP3 PNTENE VOL + YOL - FUNCTION DISPLAY ROLTMODE PRESS 100 DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PRESS 100 FUNCTION MINTEN ROLT MODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME DISPLAY ROLTMODE PLAY MODE: ROLT MACH SLEEP TIME

DEUTSCH NEDERLANDS

ENGLISH

ESPAI

FRANÇAIS

PORTUGUÊS

CLASS 1 LASER PRODUCT KLASS 1 LASER APPARAT LUOKEN 1 LAISERLAITE KLASSE 1 LASER PRODUKT

Simple line drawing of a mechanical component with a plus symbol and downward arrow (no text or labels)

Gangreserve (Batterie Installation)

Technical diagram of a mechanical device with two circular components and a central internal component (no text or symbols)

Diagram showing installation of a desktop computer with labeled components and arrows indicating assembly or connection.

Radio Data System (RDS)

Simple black horizontal line with an upward arrow at the top-left end (no text or symbols)

Diagram of a computer drive showing a button and socket (no text or symbols)

Fernbedienung

The lighting flash and arrow head within the triangle is warning sign alerting you of dangerous voltage inside the product

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICIABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product

ENVIRONMENTAL PROTECTION

Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user

The materials are reusable according to their markings. By reusing, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment.

IMPORTANT SAFETY INSTRUCTIONS:

1. Read the instructions. All uses guidelines must be read before start device.
2. Keep the instructions for future use.
3. Attention, use and security guidelines must be respected.
4. The device must not be used near water or be put in contact with moisture.
5. Make sure has no liquid is spilled on device and device openings.
6. Move device carefully, avoid shocks.
7. Do not block the breakdown of the device outputs.
8. Do not place the device near from a heat source (e.g. radiator). Do not expose it to the Sun.
9. Plug the device as indicate on this information form.
10. For cleaning the device, please follow the recommendations of the notice.

11. The sector cord should be unplugged a long period of use.

12. This device has a connection with overload protection (security device) decision-making. If the replacement of decision-making is required, please you send has an experienced or the device manufacturer technician.

13. Device shall be repaired by a qualified person when:

a. the taken or the power cord is damaged,
b. objects have fallen a I' interior camera or a liquid was reverses a I' internal device,
c. device was exposes to the rain,
d. device does not work correctly without notable exterior change,
e. device fell and the subwoofer is broken.

1. The user shall not try to maintain device beyond that which is described in this information form. The guarantee would negate.

2. MAINS plug is used as the disconnect device and shall remain readily operable and easily accessible.

3. Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.

4. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

CLASS I LASER PRODUCT

BATTERY REPLACEMENT

The battery compartment is located on the back of the remote control.

1. Remove the battery compartment door by pressing in on the tab and lifting it off.
2. Insert one (1) CR2032 size batteries into the battery compartment following the polarity markings inside the battery compartment.
3. Replace the battery compartment door.

Pure mechanical diagram showing a pin with a plus symbol and a downward arrow, no text or labels present

Battery Precautions

● Replacement of batteries must be done by an adult.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
● The supply terminals are not to be short-circuited.
● Non-rechargeable batteries are not to be recharged.
● Exhausted batteries are to be removed.
- Only batteries of the equivalent type are to be used.
● Batteries are to be inserted with the correct polarity.
- Dispose of batteries properly. Do not dispose of batteries in fire. The batteries may explode or leak.

LOCATION OF CONTROLS

MAIN UNIT

1) Standby LED indicator
2) CD tray
3) Aux-in jack
4) Remote handset stick place
5) USB Socket
6) CD tray open/close button
7) Play/Pause ▶|| button
8) Stop ■/St-Mono button
9) Skip/Tuning Up▶/Down button
10) Folder/Pre-Up/Down button
11) Memory/Clock-Adjust button
12) Remote sensor
13) LCD display
14) Volume button
15) On/Standby button
16) Function button
17) Preset EQ button
18) Display/ID3/RDS mode button
19) Timer button
20) Sleep button
21) Play Mode/RDS search button
22) Speaker
23) Backup battery compartment
24) FM wire antenna
25) AC cord

Caution:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

Important:

Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this unit off while operating other radio devices

Precautions for use

Installation

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

Backup battery installation

- This device provide a battery backup system to memory your clock time, preset memory of tuner and timer once the AC source was interrupted. Follow the engraved marking in the compartment to install 2pcs "AA" size battery(not included) with the correct direction to the battery compartment. Then cover the battery door.

Technical line drawing of a mechanical device with circular components and internal components (no text or symbols)

- Alkaline type battery recommended for long life performance.

- Wrong direction battery installation will cause explosion and damage the unit.

Install to your kitchen cabinet

1) Use the mounting template supplied with the unit to make anchor hole marks on the kitchen cabinet.
2) Drill 1/4" holes on the marks.
3) Fix the plastic pole(provided) to top of the unit with the proper high level which can match your kitchen cabinet.
4) Drive the provided screw from the kitchen cabinet to the main unit (refer to the picture).

Diagram showing a computer setup with a monitor and two stacked plates, no text or symbols present.

Connection

1. Plug in the AC cord (25) to the AC outlet. The unit will go to standby mode and the Standby LED indicator (1) will light up.
2. Turn on the unit (15), if the LCD display (13) is on with backlighting, it means the power supply is normal. Now your system is ready to play the music.

Setting the clock

1. Set unit in standby mode.
2. Press the "Mem/Clk-Adj" button (11) until display will flash "24HR" press the Skip Up ▶ or Skip Down button (9) to select the clock format between 12 or 24Hour. Then press the "Mem/Clk-Adj" button (11).
3. The first digit of "0:00" is flashing on the LCD display (13). Press Skip Up ▶ or Skip Down ▶ button (9) to set the correct hour. Press "Mem/Clk-Adj" button (11) to store the correct hour.
4. The third & fourth digit of "00" is flashing, press the Skip Up ▶▶ or Skip Down button (9) to set the correct minutes. Then press "Mem/Clk-Adj" button (11) to store the correct minute.

The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after pressing the "Mem/Clk-Adj" button.
The pre-set time will be re-set completely if dis-connecting the main power supply except backup battery installed. You are recommended to switch the system into standby mode for convenience usage.

Listening to radio

Manual tuning

1. Switch on the unit by On/Standby button (15), then press Function button (16) to select "Tuner" mode.
2. Tune to the required station by pressing the Tuning Up or Down button (9).
3. Press the Volume knob (14) to the desired volume level.

Auto tuning

1. Press Function button (16) to select "Tuner" mode.
2. Press and hold the Tuning Up or Down button (9) for 1-2 seconds and then release.
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Press Volume knob (14) to the desired volume level.

Preset stations

You can store up to 20 radio stations in the memory Set to tuner mode.

1. Turn to the desired radio station by "Manual" or "Auto" tuning method.
2. Press the Mem/Clk-Adj "button (11) until the "MEM" indicator and preset station number are flash on LCD display (13)
3. Press "Folder / Pre-up ▲/down ▼" button (10) to select the desired station memory for storage.
4. Press "Mem/Clk-Adj" button (11) again to confirm the setting.
5. Repeat step 1 to 4 to store other stations.
6. Now you can select the presets stations in order by pressing the "Folder/Pre-up ▲/down ▼ "button (10)

The pre-set memories will be cancelled completely if dis-connecting the main power supply except backup battery installed. You are recommended to switch the system into standby mode for convenience usage.
There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode automatically.
You can overwrite a present station by storing another frequency in its place.

Radio data system (RDS)

This is the features to display the information which released from the radio broadcast:-

RDS mode : Press RDS mode button( 18) to active the RDS function and the program service station name (PS) is being displayed.

RDS search : Press RDS search button(21)to select the program type you want to listen, then press the tuning +/- button to start RDS searching and the unit will automatically search a suitable station, which is currently broadcasting with program type identification (PTY) signal. If there was no any broadcasting station match your selection, display will show NO MATCH and then stay back in previous frequency.

Remark: no "PS" nor "PTY" appears if no signal is sent.

Program are classified as follows:

NEWS, AFFAIRS (current affairs), INFO (information), SPORT, EDUCATE (education), DRAMA, CULTURE, SCIENCE, VARIED, POP M (pop music), ROCK M (rock music), EASY M, LIGHT M (light classical), CLASSICS (serious classical), OTHER M (other music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.

Notes

Program service station name (PS)

This is a name consisting of less than 8 alphanumeric characters, which is displayed in order to inform listeners about the program service being broadcast by the radio station. Example: BBC 1

Programmed type identification (PTY)

PTY allows selection by one of the program types rather than by a station.

Radio text (text)

Information such as the cast list of a play or the title of a song is shown on the display.

FM-Stereo reception

• Press the “St/Mono” button (8) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular when stereo signals are weak, it is preferable to receive the program in Mono.
• If stereo signal is being received, the stereo indicator “ (ST)” will appear on LCD display (13) to show FM Stereo program is now receiving.

Hints for best reception:-

- FM : the receiver has a build-in FM wire antenna (24) hanging at the rear cabinet, this wire should be totally unraveled and extended for the best reception.

Playing Compact Disc

- Getting start

1. Press Function button (16) to select "CD" mode.
2. Push the CD tray open (6) to open the CD tray.
3. Place a CD with the printed side facing up and then close the CD tray.
4. Focus search will performing and the LCD display (13) will show the total number of tracks & total playing time. Then, the unit will start to automatically.
5. Press Volume knob (14) to the desired volume level.

●Play / Pause mode ▶II

1. To interrupt, press the "Play/Pause ▶II" button (7) once, and the playing time will be freeze on the LCD display (13). Press again to resume normal playback.

-Stop mode

1. If "Stop ■" button (8) is pressed during play or pause mode, system will go to stop mode.

- Skip mode (skip up ▶▶/ skip down ◀◀)

1. During play or pause mode, if "skip up▶▶" button (9) is pressed. It will go to next track and display the track no. and then remain the play or pause mode.
2. During play or pause mode, if "skip down I◄◄" button (9) is pressed. It will go to the previous track, original track no. is display and remain the play or pause mode.

●For MP3 Disc

1. After focus search is performing, the total number of track and album will be shown on the LCD display (13). The unit will start to plat directly.
2. Press "Folder/ Pre-up ▲/down▼" button(10) to select the folder number.
3. Press "Skip Up ▶▶| or Skip Down ◀◀" button (9) to select the track number.

ID3/Display function (On remote control)

Press the "ID3" button(18)repeatedly, the LCD display (13) show "file" during playback of MP3 file, the song file/album/song/artist name/clock time is being displayed few seconds in sequence. Then will change back to current clock time.

Remark:-

• In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (13) when press the ID3 button.
• No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
• The system support only English and Arabic number for ID3 function.

MP3 track format requirement:-

• Bit rate : 32 kbps\~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz decodable
• The performance of playing MP3 Disc is various from the quality of recording disc and the method of recording. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to difference format.

- Repeat/Random mode

Press the "Play Mode" button (21) during playback to select repeat and random function, a single track, all the tracks repeat or folder repeat(MP3 only) and random can be played in difference mode as follow:-

graph LR
    A["(1) repeat 1"] --> B["(2) repeat all track"]
    B --> C["(3) random"]
    C --> D["(4) off mode"]
    E["Play mode"] --> F["Repeat track"]
    F --> G["Repeat all"]
    G --> H["Random"]
    H --> I["Off mode"]
    J["Indicator on LCD display"] --> K["& flashing"]
    L["RAN"] --> M["----"]

For MP3 Disc

graph TD
    A["(1) repeat 1"] --> B["(2) repeat all tracks"]
    B --> C["(3) repeat 1 folder"]
    C --> D["(4) random"]
    D --> E["(5) off mode"]
    E --> F["Play mode"]
    F --> G["Repeat single track"]
    F --> H["repeat all tracks"]
    F --> I["Repeat single folder"]
    F --> J["Random mode"]
    F --> K["Off mode"]
    G --> L["Indicator on LCD display"]
    H --> M["& flashing"]
    I --> N["FOLDER"]
    J --> O["RAN"]

- Repeat play

You can listen the desired track, folder(for MP3 only) or whole disc repeat by this function.

- Random play

You can listen all the tracks in a random order by this function.

CD programming

Up to 20 tracks can be programmed for disc play in any order. Before use, be sure to press the "stop ■" button (8).

1. Set in CD mode & stop the CD playback.
2. Press the "Mem/Clk-Adj" button (11) and "MEM" will appear on LCD display (13).
3. Select a desired track by pressing skip up ▶ or down ◀ button (9).
4. Press the "Mem/Clk-Adj" button (17) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press "Play/Pause ▶II" button (7) to play the disc in assigned order.
7. Press "Stop ■" button (8) to stop playback, press Stop button again to clear all stored memory.

The programming mode will automatically stop if no button is being pressed in a period of about 10 seconds after pressing the "Mem/Clk-Adj" button.

Playback of MP3 song via USB storage media

Connecting

The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port.

1. Set the system at standby mode first or other function except USB mode.
2. Open the USB socket cover and plug-in the USB pen-drive with the face up & make sure it going into completely.

3. Connecting the USB upside down or backwards could damage the audio system. Check to be sure the direction is correct before connection.

4. Set Function button (16) to " USB mode.

5. The system will start reading the storage media automatically after connecting, and LCD display (13) will show the total number of folder and MP3 files being detected.

6. Repeat the same playback procedure as playing CD/MP3 disc as above.

Remark

• The system can detect and read the file under MP3 format only at USB mode but not other music file format.
• If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is not designed for communication with computer directly

Removing of USB

To remove the USB storage media, change the function mode to either CD, Aux, or Tuner first. Then un plug it by pulling out the USB socket directly.

More features

A. Sleep function

1. Press "Sleep" button (on Remote) "SLP-90" will shown on the LCD display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >....10 minutes respectively and sleep icon "ZZZ" will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press "Sleep" button until "SLP-off" displayed and the "zzz" indicator disappear on LCD display.

B. Cooking timer

This system had cooking timer function from 1 to 120 minutes to remind your cooking state by bee tone sound.

Press and hold the "Timer" button(19) to enter the timer setting mode, the first digits of display and timer icon will flashing. Press Volume button (14) to adjust the countdown minute, the display will run up from 1 minute to 120 minutes maximum. Then press "Timer" button (19) to confirm the countdown time, then press Volume button (14) to adjust the bee tone volume level. Press the "Timer" button to complete the timer setting. System will start to countdown automatically and display will change to countdown state. Once countdown was arrived, bee tone sound will coming.

Remark:-

There are about 6 seconds for timer setting mode, this system will return to normal mode automatically if no keys being pressed in this time frame.
You still can enjoy your music during timer countdown. Once countdown was arrived, the system will generate a bee tome sound instead of your playing music, just press "Timer" button(19) to switch off the timer bee tone sound then your music will resume playing.
You also can disable the timer function anytime by press "Timer" button(19) until the timer icon 📋 disappear.

C. Pre-set EQ function

This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing the "Preset EQ" button (14) repeatedly at following sequence:-

graph LR
    A["FLAT"] --> B["CLASSIC"]
    B --> C["ROCK"]
    C --> D["POP"]
    D --> E["JAZZ"]
    E --> A

D. ID3/Display function

Since this system designed with clock/timer feature, thus, the LCD display will change to clock automatically after operation. To check your playing mode state(such as CD track nr./radio frequency) press "Display/ID3" button(18) to change the information for displaying few second.

Aux-in connection

Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) Cassette player, etc. to this system via a audio cord with RCA plugs (not supplied).

Connect one end of this cord to the external device and the other end to the Aux-in jack (3) on the back of the unit.

When connected in this way and select to Aux mode by Function button (16). It is possible to play back the music already on the connected device.

Remote handset placement

Remote handset can stick on both side of the unit by a magnet plate to avoid losing and convenience using.

Diagram of a computer monitor with an open screen and ventilation slots, showing no text or symbols.

Remote control transmitter

Control functions

Battery installation (battery not provided)

The infra-red transmitter require 1 pc "CR2032" size battery for operation

Button description

On/standby	Press to power on / standby the system	1	-	○	○	○	-	8
Skip up▶▶/down◀◀ / Tune+/-	Press to select previous / next tracks at CD/USB mode	2	-	○	○	○	-	9
	Press to step up/down of radio frequency at tuner mode	3	-	○	○	○	-	10
-10/+10	In CD/MP3 mode : skip up/down 10 tracks	4	-	○	○	○	-	11
		5	-	○	○	○	-	12
Folder/Pre Up-Down	In Tuner mode : press to select preset memory up/downIn USB mode : press to select folder up/down	6	-	○	○	○	-	13
Display/ID3/RDS mode	To active the ID3 function or change display Information.In tuner mode : active the RDS function.
Volume -/+	Press to adjust volume level up/ down
Function	Select the function between CD/Tuner/USB/SD/Aux
Sleep	Press to active sleep function
Play/pause▶II	In CD/USB mode : press to start playback / pause mode
Stop ■/St-Mono	In CD/USB mode : press to stop the playbackIn Tuner mode : select stereo/mono mode
Mem / Clk-adj	In standby mode : press & hold to adjust clockIn Tuner mode : press to preset memory
Play mode/RDS search	In CD mode : press to active random/repeat functionIn tuner mode : active the PTY search mode
Timer	Press to set the timer function
Preset EQ	Press to select difference EQ mode for enjoyment

Technical specifications

FM frequency: 87.5 – 108 MHz

Power supply: AC 230V\~50Hz

Power consumption: Max. 23 Watt

Changes of technical specifications without further notice

Copyright by Wörlein GmbH, 90556 Cadolzburg, www.woerlein.com

PROTECTION DE L'ENVIRONNEMENT

Simple line drawing of a mechanical component with a circular top and arrow indicating direction (no text or symbols)

Diagram of a device control panel with numbered components and labeled ports

22 23

24 25

Attention :

Pure mechanical diagram showing a device with two circular components and internal components (no text or symbols)

Diagram showing a device with labeled components and measurement indicators, likely illustrating a physical setup or assembly.

Brancher

●Mode Lecture/pause ▶II

Diagram of a computer tower with an open panel and directional arrow indicating movement (no text or symbols)

Simple line drawing of a mechanical component with a circular top and arrow indicating direction (no text or symbols)

Diagram of a device control panel with numbered components and labeled ports

22 23

24 25

Opgelet:

Pure mechanical diagram showing a device with two circular components and internal components (no text or symbols)

Diagram showing a computer setup with a monitor and a stack of cables (no text or symbols visible)

Aansluiting

Diagram of a computer monitor with an open screen and ventilation slots, showing no text or symbols.

Pure mechanical diagram showing a pin with a cross symbol and an arrow pointing to a base component (no text or labels)

Diagram of a device front panel with numbered labels pointing to various components and indicators.

22 23

24 25

Precaución:

Technical line drawing of a mechanical device with no visible text or symbols

Diagram of a server rack with two monitors and three sensors, no text or symbols present

Conexión

Diagram of a computer drive with a labeled component (no text or symbols present)

CLASS 1 LASER PRODUCT KLASS 1 LASER APPARAT LUOKEN 1 LAISERLAITE KLASSE 1 LASER PRODUKT

CUIDADO – RADIAÇÃO LASER INVISÍVEL QUANDO ABRIR A TAMPA OU PREMIR O FECHO DE SEGURANÇA. EVITE EXPOSIÇÃO AO FEIXE LASER.

AVISO

Pure mechanical diagram showing a pin with a cross symbol and an arrow pointing to a base component (no text or labels)

Diagram of a device control panel with numbered labels pointing to various components and functions.

22 23

24 25

Cuidado:

Technical diagram of a mechanical device with circular components and internal components (no text or symbols)

Diagram showing two electronic devices with labeled components and connection points (no text or symbols present)

Ligação

Diagram of a computer drive showing a button and ventilation grille (no text or symbols)

Transmissor controlo remoto

Funções do controlo