32LED6115CDW - TV SALORA - Free user manual and instructions

USER MANUAL 32LED6115CDW SALORA

Simple line drawing of a computer monitor with a circular base and abstract lines at the bottom (no text or symbols)

32LED6105CD

32LED6115CDW

GEBRUIKERSHANDLEIDING (NL)

LEES DIT ZORGVULDIG DOOR VOOR GEBRUIK

Diagram of a device layout with labeled components and directional arrows (no text or symbols)

SFKURHI M4x10

Diagram of an electronic device with labeled components and directional arrows indicating movement or force (no text or symbols present)

6 FKURHI M4x10

Diagram of a device interior with labeled components and directional arrows indicating movement or force (no text or symbols present)

INHOUDSOPGAVE

TOETSFUNCTIONS BEDIENINGSPANEEL

Voorpaneel....1

EXTERNE APPARATUUR

Zijpaneel....2

Aansluitschema ....

Achterpaneel....

AFSTANDSBEDIENING

Afstandbedieningstoetsen....

BATTERIJEN PLAATSEN......□□□□

AAN DE SLAG

Inschakelen....

Selecteer bron .........

DTV-MENU INSTELLEN

Kanaal .........

Beeld

Geluid

Tijd....

Optie....

Pvr-bestandssysteem (pvr file system)....□□□

Vergrendelen ....

Line drawing of a computer monitor with two labeled ports (1 and 2) on the side, no text or symbols present.

PANEEL TOETSEN

1 2 3 4 5 6 7 8 9 %II ▲ SOURCE MENU CH- CH+ VOL- VOL+ ⏻ • ●

DVD VIDEO™ (7, (7=,-') (

ZIJPANEEL

1 2 3 4 5 6 7 8 9 10

1. 79 VLJQDDQLQJDQJ
2. 86%□DDQV0XLWLQJ
3. \$ XGLR□RRUWHOHI RRQXLWJDQJ
4. \$9 LQJDQJ UHFKWV OLNQNV 9 LGHR
5. <3 E3UQLQJDQJ
6. &,□DDQVOXLWLQJ
7. +' 0 ,LQJDQJ□RSWLRQHHO□
8. 3 & 9* \$☐LQJDQJ
9. 3 & DXGLR LQJDQJ
10. +' 0 ,LQJDQJHQ

AANSLUITSCHEMA

Diagram showing various audio and video connector components with labels like Audio, Video, and audio signal lines.

i OPMERKING

Diagram showing battery charging process with moving battery and battery stack, illustrating charging mechanism and component arrangement.

LEVENSDUUR BATTERIJ

CI Information Viaccess Conditional Access Main menu System information Smart card management Language setting Press 'OK' to enter; Press 'EXIT' to return

PVR-OPNAME-toets: GOTO/ROOD

2 P ☐WH☐EHJLQQHQ☐P HW☐395 ☐2 31 \$0 ( ☐SHUV☐HQ☐NQRS☐☐VHFRQGHQ☐LQJHGUXNM☐

PVR-LIJST-toets: ANGLE/BLAUW

2 P GH RSJ HQRP HQ CLM V W H RSHQHQ SHUV HQ NQRS VHFRQGHQ LQJ HGUXN

PVR-AFSPEEL-toets: TEXT/▶

PVR-PAUSE-toets of PVR-TSR-toets: MIX/ ▶II

PVR-HERHAAL SEGMENT-toets: A-B/GROEN

) OT2 LWHQ

01 - U2 - With or without you 00:03:30 / 00:04:45 3DXJ H 7HXJNSHHD 9FRIXWSHDD 9RILJH 9RLJRCGH 6IRS + HKDC$JH ' ( 0 3 )

FILMMENU

Line drawing of a hand holding a circular object with a central hole (no text or symbols)

Reinigen van discs

Illustration of a hand holding a pinwheel with a directional arrow indicating rotation (no text or symbols)

DVD PROBLEEMOPLOSSING

Simple line drawing of a computer monitor with a circular base and abstract sketch lines at the bottom (no text or symbols)

SALORA

LED COLOUR TV

Simple line drawing of a computer monitor with a circular base and abstract lines at the bottom (no text or symbols)

32LED6105CD

32LED6115CDW

USER MANUAL (GB)

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the LED TV corresponds to the local electrical supply. If you are unsure of your power supply, ask your local power company.
● Never insert anything metallic into the cabinet openings of the liquid crystal display LED TV/monitor; otherwise it may create the danger of electric shock.
● To avoid electric shock, Never touch the inside of the LED TV/monitor and adapter. Only a qualified technician should open the case of the LED TV/monitor/adapter.
- Never use your LED TV/monitor/adapter if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it.
- Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
● Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
- Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
- Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.
- Do not place naked flame sources, such as lighted candles on the apparatus.
Take attention to the environmental aspects of battery disposal.
- Use the apparatus only in moderate climates (not in tropical climates).
● The mains plug shall remain readily operable.

- Openings in the LED TV/monitor/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LED TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LED TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

- Do not expose the LED TV/monitor to extreme temperature conditions or to extreme humidity conditions.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

- Do not place the LED TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g. Acetone), ethyl alcohol, toluene, ethyl lacid, methyl, or chloride-these may damage the panel.

- Locate your DC adapter near an easily accessible AC outlet.

- If your LED TV/monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorizeddealerorservice center.

- High temperature can cause problems. Don't use your LED TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

● Unplug the DC adapter when it is going to be left unused for an extended period of time.

- To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

- If the LED TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel.

● Unplug your DC adapter from the AC outlet before any service.

- Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards.

- Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LED TV/monitor is in safe operating order.

● The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

Diagram of a device layout with labeled components and directional arrows (no text or symbols)

Screw M4x10

Diagram of an electronic device with labeled components and directional arrows indicating movement or force (no text or symbols present)

Screw M4x10

Diagram of a device interior with labeled components and directional arrows indicating movement or force (no text or symbols present)

CAUTION: Before mounting a TV stand, place TV on a blanket or quilt with the TV screen facing down, to avoid surface damage.

CONTENT

PANEL BUTTON FUNCTIONS

Front panel....1

EXTERNAL EQUIPMENT

Rear panel....2

Connecting diagram....2

Back panel....3

REMOTE CONTROL

Remote buttons....4

Battery installation....6

LET'S START

Switching On....7

Select source operation....7

DTV MENU SETUP

Channel 8

Picture 10

Sound....11

Time 11

Option....14

395 5 HP RWH FRQWURCNH IXQFNLRQV......

395 ) XQFMLRQV□□□□□

Lock ....

Electronic program guide (EPG)....

Information....

ATV MENU SETUP

Channel ....

Picture ......

Sound....

Time ....

Option....

Lock ....

TELETEXT FUNCTION

Teletext function ......

SCART/AV/COMPONENT/HDMI MENU SETUP

Video setting menu....

PC MENU SETUP

Channel

Picture ......

Sound....

Option....

Time ....

Lock .........

USB OPERATION

Brief introduction......□□

Playback....

Foto menu....

Music menu....

Movie menu....

Text menu....

CONTENT

DVD OPERATION

Basic operation....

Supporting DVD format....

DVD functions operating instructions....

MP3/JPEG/AVI Playback....

Function Settings......

Care and Maintenance....

TROUBLE SHOOTING

Display troubleshooting....

Sound and TV troubleshooting....

DVD troubleshooting....

SPECIFICATIONS

Specifications....

FRONT PANEL

1. IR sensor window
2. Indicator (the indicator is red when in standby mode, and green when in working normally).

Line drawing of a computer monitor with two labeled terminals (1 and 2) on the right side, no text or symbols present.

1. Start of play or pause of play
2. Take the disc out
3. Select input source
4. Enter or exit menu
5. Decrease channel number
6. Increase channel number
7. Decrease sound volume
8. Increase sound volume
9. Switch between standby and power-on mode

DVD VIDEO™ LABEL SIDE

SIDE PANEL

1 2 3 4 5 6 7 8 9 10

1. TV signal input
2. USB connector
3. Audio Earphone output
4. AV (Right/Left/Video) input
5. Y/Pb/Pr input
6. CI connector
7. HDMI input (optional)
8. PC VGA input
9. PC and Y/Pb/Pr audio input
10. HDMI inputs

CONNECTING DIAGRAM

Diagram showing various audio and video connectors with labels such as antenna, USB, audio jack, and audio output devices.

You should insert all necessary cables BEFORE plugging in the power cord.

BACK PANEL

3 41 2

1. SPDIF output
2. SCART connecting terminal
3. AC Power supply
4. Mains Switch

REMOTE BUTTONS

RC-D3-03 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 POWER MUTE FAV FMODE S MODE SLEEP SCALE GOTO A-B 4 5 6 REPEAT 7 8 9 ANGLE RECALL 0 -/-- SETUP EXIT OK CH+ CH+ VOL- VOL+ II/> TEXT MIX INDEX SOURCE CANCEL REVEAL HOLD SIZE DVD-MENU TITLE PBC AUDIO S.PAGE PAGE-PAGE+ VI DISPLAY ZOOM+ ZOOM+ SUBTittle I RADIO EPS S.TITLE

18 AUDIO / I/II

To change the audio language and sound track, valid in digital TV and DVD mode. To switch the audio channel in NICAM/A2 or Mono TV channel (valid in analog TV).

19 PBC/PAGE+

To setup the PBC on/off in DVD mode /browse the next page of teletext in analogue TV mode. To zoom in the Picture in USB mode.

20 SUBTITLE

To select subtitle's language or switch to JPEG display mode, valid in DVD and digital TV mode.

②1 ZOOM+/EPG

To zoom in to the picture valid in DVD mode/To display the program guide valid in digital TV mode.

1 POWER

To switch between standby mode and power-on mode.

② MUTE

Sound mute switch.

③ SLEEP

To setup the sleep timer.

4 SCALER

To switch video format between "Auto", "16:9" 4:3, ZOOM1, ZOOM2 (not valid in VGA)

⑤ GOTO/RED

To play from a certain time point(valid in DVD mode)/select page in analogue TV teletext mode.

⑥ A-B/GREEN

To segment repeat(valid in DVD mode)/select page in analogue TV teletext mode.

⑦ REPEAT/YELLOW

To repeat playback(valid in DVD, USB mode)/select page in analogue TV teletext mode.

8 ANGLE/BLUE

To change camera angle in DVD mode when playing DVD disc/select page in analogue TVteletext mode.

⑨ TWO-DIGIT number button

To switch between one or two-digit number valid in DVD.

10 EXIT

To exit or back to previous menu.

11 Left/Right cursor(menu adjustment)

To move left/right or adjust the selected item in the menu.

12 OK button

To confirm the selections.

⑬ VOL+/-

To increase or decrease sound volume.

14 INDEX/ ■

To display the teletext time in TV mode (not valid for MHEG5).

To display main content page when playing the teletext in analogue TV/To stop playing valid in DVD and USB mode.

15 SOURCE

To select input source.

16 HOLD/

To stop teletext on current page in analogue TV/To select the previous chapter or track, valid in DVD and USB mode.

SIZE/▶▶

To magnify teletext page in analogue TV/To select the next chapter or track in DVD and USB mode.

REMOTE BUTTONS

22 EJECT/FAV

Disc in/out, valid in DVD mode/To switch to favourite list, valid in digital TV mode.

23 S-MODE

To select sound field modes: Music, Film, News and User.

24 P-MODE

To select picture mode: Standard, Dynamic, Soft, User (not valid in VGA mode).

25 Number button

To select program number.

26 RECALL

To swap between a previous program and the current program in analogue TV and digital TV.

27 SETUP

To display setup menu, different in different source mode.

28 UP/DOWN cursor

To select up/down in the menu.

29 CH+/-

To increase or decrease program number valid in analogue TV and digital TV mode.

30 MIX/11/▶

To display analogue TV and teletext in the same time/pause playing/steps playback in pause mode, valid in DVD and USB mode.

31 TEXT/▶

To enable or disable the function of teletext or MHEG5 /To playback, valid in DVD and USB mode.

32 REVEAL/▶▶

To display the hidden teletext information in analogue TV/To fast-forward DVD playback, valid in DVD and USB mode.

33 CANCEL/

To cancel teletext in analogue TV/ To fast backward playback, valid in DVD and USB mode.

34 DVD-MENU/S.PAGE

Togo to the menu of DVD menu, valid in DVD mode/Togo to the sub page of teletext, valid in analogue TV mode.

35 TITLE/PAGE-

Togo to the DVD menu, valid in DVD mode/ browse the previous page ofteletext in analogue TV mode. / To zoom out Picture in USB mode.

RC-D3-03 FAV POWER MUTE S/MODE S/MODE S/LEEP SCALER GOTO 1 2 3 A-B 4 5 6 REPEAT 7 8 9 ANGLE RECALL 0 -/-- SETUP EXIT OK CH- CH+ VOL- VOL+ TEXT MIX INDEX SOURCE CANCEL REVEAL HOLD SIZE DVD-MENU TITLE PBC AUDIO PAGE- PAGE+ SUBTITLE DISPLAY ZOOM- ZOOM+ EPG S-TITLE I RADIO

36 DISPLAY

To display track time in DVD mode/Display information in digital TV mode

37 RADIO/ZOOM-

To switch between TV and radio modes, valid in digital TV mode /To zoom out to the picture valid in DVD mode.

BATTERY INSTALLATION

Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment, as follows:

Diagram showing battery charging process with moving and moving batteries, including a battery symbol and charge distribution.

BATTERY LIFE

● Normally, battery can be used for one year.
- If the remote control is still not working, when very near to the TV's remote sensor window, please use new batteries.
● Please use SUM-4(AAA) battery.

i NOTES

● Never use rechargeable battery.
● Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
● Pay attention not to fall or knock the remote controller, which will cause damage or function failure to it.
● Do not use a new and an old battery together.
- When not using the remote controller for a long time, please take out the battery to avoid liquid leakage. Before replacing a new battery, please clean the electrolyte in the remote controller.
● If electrolyte splashes into the body, please clean it with water.

CAUTION:

Please put the battery into a place children cannot touch. If swallow by accident, please contact your local doctor immediately.

SWITCHING ON

After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary cables include power have connected, the next you should do is:

Press the [POWER] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green. Now you can enjoy the many features of your new TV.

SELECT SOURCE OPERATION

You can select input source by using source menu. Press [SOURCE] button on the remote control to show the menu as follows:

Input Source DTV ATV SCART Component PC-RGB HDMI1 HDMI2 HDMI3 AV DVD USB OK Select RSMLRQD0

The current source item is highlighted. Through press [▲/▼] button on the remote control to select your desire. Press [OK] button to confirm your choice.

PLEASE NOTE, THAT IF SOME ITEMS ARE INACTIVE/UNAVAILABLE (GRAYED-OUT IN THE OSD MENU) THEY ARE NOT DISCUSSED IN THIS CHAPTER. THESE ITEMS ARE DETAILED DESCRIBED IN OTHER CHAPTERS.

In DTV mode, press [SETUP] button on the remote control.

Through pressing [◀/▶] button on the remote control, you can select LED menu sections (menu sections consist of "CHANNEL", "PICTURE", "SOUND", "TIME", "OPTION", "LOCK"). Press [▲/▼] button on the remote control to select the item in this menu section, and then press [◀/▶] button to adjust parameter value. Press [EXIT] or [SETUP] button to exit from menu tables.

CHANNEL

Select CHANNEL section to setting DTV channels. You may select Auto Tuning, DTV Manual Tuning, ATV Manual Tuning (described in ATV MENU SETUP), Programme Edit, Signal Information, CI Information, LCN Sorting and Software Update(USB)

Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information CI Information LCN Sorting Software Update (USB) CHANNEL Move SETUP Return OK Select EXIT Exit

Auto Tuning item enables to adjust channel setting automatically.

Select Auto Tuning item, press [OK] button. Press [▲/▼] to select DVB-Type. You can select ATV/DVB-T or ATV/DVB-C.

If You select DVB-C, the additional submenu appears for DVB-C scan type.

DVB Select type

ATV/DVB-T

ATV/DVB-C

DVB-C Scan Menu
Scan type	Network Scan
Frequency	Auto
Network ID	Auto
Symbol(ks/s)	Auto

Press [ ◀/▶ ] button to select tuning type between DTV+ATV, DTV or ATV.

Press [◀/▶/▲/▼] button to select your country.

graph TD
    A["Tune Type"] --> B["UK"]
    A --> C["New Zealand"]
    A --> D["United Arab Emirates"]
    A --> E["Estonia"]
    A --> F["Turkey"]
    A --> G["Morocco"]
    A --> H["SETUP Return"]
    A --> I["DTV+ATV"]
    A --> J["Tunis"]
    A --> K["Algeria"]
    A --> L["Egypt"]

Press [OK] button to start auto searching

Select DTV Manual Tuning item, press [◀/▶] button to select channel number and press [OK] to start search.

Channel Tuning ATV : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Data : 0 Programme(s) 0 %... (DTV)

Programme Edit item enables to enter submenu to set channel Delete, Rename, Move, Skip and add to favourite list Fav.

Programme Edit 17 Digital DTV Delete Rename Move Skip OK OK FAV FAV SETUP Return

Signal Information item enables to obtain information about the Channel Nomber, quality and strength of the signal.

Signal information Channel 255 Network ... Modulation QPSK Quality 0 Strenght 91

CI Information item enables to obtain information about the Conditional Access, if CI Module inserted.

CI Information Viaccess Conditional Access Main menu System information Smart card management Language setting Press 'OK' to enter; Press 'EXIT' to return

LCN Sorting item can be changed between On and Off. Software Update (USB) enables to update the software via USB input.

PICTURE

Select PICTURE section to adjust picture parameters. You may select Picture Mode, Colour Temperature, Aspect Ratio and Noise Reduction.

Picture Mode Standard Color Temperature Aspect Ratio Noise Reduction Screen < PICTURE > Move SETUP Return OK Select EXIT Exit

Picture mode item can be changed between User, Dynamic, Standard and Mild. You may adjust Contrast, Brightness, Color, Sharpness and Tint for User mode Color Temperature mode item can be changed between User, Cold, Medium and Warm. Aspect Ratio mode item can be changed between Auto, 4:3, 16:9, Zoom1 and Zoom2. Noise Reduction item can be changed between reduce noise mode: Off, Low, Middle, High and Default.

SOUND

Select SOUND section to adjust sound parameters. You may select Sound Mode, Balance, Surround Sound, AD Switch and SPDIF MODE.

Sound Mode Standard Balance Surround Sound AD Switch SPDIF MODE Move SETUP Return OK Select EXIT Exit

Sound Mode item can be changed between User, Standard, Music, Movie and Sports. You may adjust 120Hz, 500Hz, 1,5kHz, 5kHz and 10kHz equalizer for User mode Balance item can be adjusted from -50 to +50 for L and R sound balance. Default value is 0. Surround Sound item can be changed between Off and Surround. AD Switch item can be changed between On and Off. SPDIF Mode item can be changed between PCM or Auto.

TIME

Select TIME section to select Clock, Off Time, On Time, Sleep Timer, Auto Standby and Time Zone.

Clock -- -- Off Time Off On Time Sleep Timer Auto Standby Time Zone London GMT TIME Move SETUP Return OK Select EXIT Exit

In Clock submenu you can set the Date, Month, Year, Hour and Minute.

Clock Date 01 Month 01 Year 1980 Hour 00 Minute 03 SETUP Return

The Off Time submenu can be changed between Off, Once, Every Day, Mon.-Fri., Mon.-Sat., Sat,-Sun. and Sunday. You may adjust Hour and Minute in this submenu.

Off Time Hour 00 Minute 00 SETUP Return

The On Time submenu can be changed between Off, Once, Every Day, Mon.-Fri., Mon.-Sat., Sat,-Sun. and Sunday. You may adjust Hour, Minute, Input Source, Channel and Volume in this submenu.

On Time Hour 12 Minute 00 Radio Volume 30 SETUP Return

Auto Standby item enables to set the auto standby function (Off, 3 Hour, 4 Hour and 5 Hour). Default auto standby value is 4 Hour - TV will automatically switch to Standby mode after it has not been actively used for 4 hours.

Auto standby Off 3 Hour 4 Hour 5 Hour SETUP Return

Time zone item enables to set the local time zone.

Time Zone Canary GMT Rabat GMT Berlin GMT+1 Lisbon GMT Amsterdam GMT+1 Brussels GMT+1 London GMT Beograd GMT+1 Budapest GMT+1 SETUP Return

OPTION

Select OPTION section to select OSD Language, Audio Languages, Subtitle Language, Country, PVR File System, Restore Factory Default, OSD Animation, OSD Time.

OSD Language English Audio languages Subtitle Language Country PVR File System Restore Factory Default OSD Animation OSD Time Blue Screen MOVE SETUP Return OK Select EXIT Exit

OSD Language item enables to adjust OSD language.

graph TD
    A["OSD Language"] --> B["Česky"]
    A --> C["Dansk"]
    A --> D["Deutsch"]
    B --> E["English"]
    C --> F["Espanol"]
    D --> G["Ελληνικ+"]
    H["Français"] --> I["Hrvatski"]
    J["Italiano"] --> K["ITALIANO"]
    L["SETUP Return"] --> M["↓"]

Audio Languages item enables to select primary and secondary speech language of a program (available only in DTV mode if program provider supports the multi language function).

graph TD
    A["Audio Languages"] --> B["Primary"]
    C["Česky"] --> D["English"]
    E["Dansk"] --> F["Espanol"]
    G["Deutsch"] --> H["Ελληνικ+"]
    I["SETUP"] --> J["Return"]
    K["Français"] --> L["Hrvatski"]
    M["Italiano"] --> N["Italiano"]

Subtitle Language item enables to select primary and secondary subtitle language of a programme.

Country item enables to choose user's country.

graph TD
    A["Subtitle Language"] --> B["Primary"]
    C["Česky"] --> D["English"]
    E["Dansk"] --> F["Espanol"]
    G["Deutsch"] --> H["Eλληνικ+"]
    I["SETUP Return"] --> J["Italiano"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#cfc,stroke:#333
    style J fill:#fcc,stroke:#333

graph TD
    A["Country"] --> B["UK"]
    A --> C["New Zealand"]
    A --> D["United Arab Emirates"]
    A --> E["Estonia"]
    A --> F["Tunis"]
    A --> G["Turkey"]
    A --> H["Morocco"]
    A --> I["Egypt"]
    A --> J["SETUP Return"]

PVR FILE SYSTEM

PVR REMOTE CONTROL KEY FUNCTIONS

1 2 3 GOTO A-B 4 5 6 REPEAT 7 8 9 ANGLE RECALL 0 - /-- SETUP EXIT OK CH- CH+ VOL- VOL+ /// TEXT MIX INDEX SOURCE CANCEL REVEAL HOLD SIZE

PVR RECORD key: GOTO/RED

To start PVR record press and hold button for 3 seconds.

PVR LIST key: ANGLE/BLUE

To call the recorded list press and hold button for 3 seconds.

PVR PLAY key: TEXT/▶

Play the recorded programs in Media mode.

PVR REWIND key: CANCEL/◀◀

Rewinds at high speed. Each time you press this button the rewind speed is increased.

PVR FAST FORWARD key: REVEAL/▶▶

Fast forward at high speed. Each time you press this button the fast forward speed is increased.

PVR PAUSE key or PVR TSR KEY: MIX/▶II

Pause the play of recorded program or Start of the TSR program.

PVR PREVIOUS key: HOLD/I

To go back to the previous recorded program.

PVR NEXT key: SIZE/▶▶I

To go forward to the next recorded program.

PVR SEGMENT REPEAT key: A-B/GREEN

To select segment for repeat of recorded program.

PVR FUNCTIONS

Imagine coming home to your own personal library of television programs, movies, and sports that you can watch whenever it's convenient for you. It's TV for your schedule.

Pause of live television!

Rewind and replay programs so you don't miss a beat.

Record your favourite programs and view them as many times as you want.

The PVR File system menu description

Insert USB device into your TV's USB port. Press [SETUP] button on the remote control, select OPTION section, line PVR File System.

OSD Language Audio languages Subtitle Language Country PVR File System Restore Factory Default OSD Animation OSD Time Blue Screen Move SETUP Return OK Select EXIT Exit

Select Disk: select the disk as a PVR file system disk.

Check PVR File System: check the disk file format.

USB Disk: display the USB Disk activation status, "PASS" flag is activation. Not chosen, shown automatically.

Format: format the USB disk, create PVR file system format to the USB disk.

Time Shift Size: Shows about the TSR capacity. Not chosen, shown automatically.

Speed: read and write speed. Not chosen, shown automatically.

PVR Record limit: the biggest recording set-up time, unit is hour.

Select Disk C: Check PVR File System Start USB Disk Pass Format Pass Time Shift Size All Speed 682 KB PVR Record Limit 6Hr SETUP Return

Recording

NOTE

Before recording please perform steps discussed in the PVR file system menu description.

Press [GOTO/RED] key for 3 seconds to start recording. For stopping use [■] button on the RC or select [Stop] on the Command Line. You can display the Command Line with RC button [OK] while recording or previewing record.

Play FB FF Prev. Next Pause Stop

Previewing records

You can switch to Recorded List by pressing [ANGLE/BLUE] button for 3 seconds. Choose wanted record by moving cursor [▲▼] and press [OK]. Press [GOTO/RED] button to delete record, [A-B/GREEN] - to display record information.

Previewing in USB mode: Switch to USB mode using [SOURCE] menu, select MOVIE > Wanted disk > MST PVR > Wanted record. Press [▶] to play record in full screen, [OK] - to preview record, [Delete] - to delete record. While watching record, press [OK] to call the command line.

Command line functions

You can find these functions in a command line: Pause; FB; FF; Prev.; Next; Stop;

Repeat (Repeat All > Repeat None > Repeat 1); Set A/B; Playlist; Info.; Slow Forward;

Step Forward; Goto Time; Zoom In; Zoom Out; Aspect Ratio (Auto > Zoom 1 > Zoom 2 > 16:9 > 4:3); Move View.

Time Shift Record (TSR)

Press the [▶II] key to stop translation. To watch translation press [▶/TEXT] button. To call the command line press [OK]. To stop TSR and back to normal mode press [■].

PVR using EPG menu

Press [EPG] button on the RC to call EPG menu. Switch to Recorder mode by pressing [GOTO/RED] button.

RECORDER 1 YLE TV1 Start time 15 Minute 08 Hour Dec Month 07 Date End time 15 Minute 08 Hour Dec Month Mode AUTO

Setup channel, start and end time, then press [OK]. You can choose record periodicity in a bottom line: Mode Auto > Mode Once > Mode Every Day > Mode Weekly.

PVR funktion on EPG menu is available on TV Standby mode.

PVR operator attentions

USB disk at least GB in capacity; the length of record determines the capacity of disk.

High-speed USB devices with Hi Speed FS file system are recommended for multimedia and PVR application.

Mobile HDD or high-speed USB stick are recommended for better performance in PVR and time shift application.

Formatted, it will delete all the contents out, pay attention to preservation of important information. If USB disk have some virus, format function would be failure.

PVR functionality is only effective at the next port DTV.

Has multiple partitions such as the use of mobile hard disk, you can PVR File System menu, and select the corresponding letter PVR.

PVR File System menu of the Recorder will be limited one-time burn the longest. That time will automatically exit. Recording maximum time period set for 24 hours.

Signal formats for DTV video format (TS streams).

PVR function is only available in DTV source.

PVR files will be played in USB mode only if the file size is larger than 5 Mb.

USB device must be compatible USB 2.0 HS specification.

Restore factory defaults item enables to reset all values to default.

OSD Animation enables or disables fade and slide effects of OSD items and menus.

OSD Time item enables to set OSD time on screen (15s, 30s and 60s).

OSD Time 15 sec 30 sec 60 sec SETUP Return

LOCK

Select LOCK section to Lock System, Set Password, Block Program, Parental Guidance.

Lock System Set Password Block Program Parental Guidance Off < LOCK Move SETUP Return OK Select EXIT Exit

You can lock selected program or keyboard, set the parental guidance, if the item Lock System is to On switched. If you want to change the Lock System, you must enter default password: 0000 first.

Please enter password Clear Cancel

If you want to change default password, you must select Set Password item.

Please enter old password Please enter new password Confirm new password Clear Cancel

Block program item enables to block access to undesired programs.

Block Programs 1 BBC ONE DTV 2 BBC TWO DTV 7 BBC CHOICE DTV 10 BBC FOUR DTV 12 CBBC DTV Lock OK OK SETUP Return

Parental Guidance item enables to set the age limit for programs.

Parental Guidance Off 4 5 6 7 8 SETUP Return

ELECTRONIC PROGRAM GUIDE (EPG)

By pressing the EPG button on the remote control, an Electronic Program Guide is displayed. The EPG supplies information, such as program lists, starts and end times of all available channels. In addition, the detailed information about the program is often available in the EPG. (The availability and the amount of program details will vary depending on the broadcaster.)

There is a possibility to select EPG format between time and channel. Press [▲/▼] button to move cursor on the top line PROGRAMME GUIDE. Press [◀/▶] to select between TIME or CHANNEL. TIME format displays EPG of all channels at the same time. CHANNEL format displays EPG of one channel hour by hour.

Press red button for record function. You can set the start time, end time and recording mode. Refer to PVR FILE SYSTEM description. Press green button to see the additional information. Press yellow button to see the schedule. Press blue button for the reminder function. You can set the date, time and reminder mode.

PROGRAMME GUIDE TIME 13 Jul 09:00 1 BBC ONE No information 2 BBC TWO No information 7 BBC CHOICE No information 10 BBC FOUR No information 12 CBBC No information RECORD INFO SCHEDULE REMINDER OK OK INDEX Index

PROGRAMME GUIDE CHANNEL CH1 15:25-15:45 Tweenies 15:45-16:10 Cubix RECORD INFO SCHEDULE REMINDER OK OK INDEX Index

Reminder setting 1 BBC ONE 25 Minute 15 Hour Jul Month 12 Date ★ Once Mode OK OK

INFORMATION

To obtain more information about present and following events, you can press [DISPLAY] button. Like previously, the following event is displayed by pressing the [◀/▶] buttons (toggle between present and following events):

1 BBC 08:10 Thurs.Sep 02 2010 No Information 576i DTV SD Subtitle English No Program information

PLEASE NOTE, THAT IF SOME ITEMS ARE INACTIVE/UNAVAILABLE (GRAYED-OUT IN THE OSD MENU) THEY ARE NOT DISCUSSED IN THIS CHAPTER. THESE ITEMS ARE DETAILED DESCRIBED IN OTHER CHAPTERS.

This product can store up to 100-channel programs. You can select your favourite channel through pressing [CH+/-] or number buttons, and you can scan and store all of the channels through manual or automatic mode. In ATV mode, press [SETUP] button on the remote control.

Through pressing [◀/▶] button on the remote control, you can select LED menu sections (menu sections consist of "CHANNEL", "PICTURE", "SOUND", "TIME", "OPTION", "LOCK").

Press [▲/▼] or [OK] button to enter this menu section.

Press [▲/▼] or [OK] button on the remote control to select the item in this menu section, and then press [◀/▶] button to adjust parameter value. Press [SETUP] button to return to main menu or [EXIT] button to exit from menu tables.

CHANNEL

Select CHANNEL section to adjust ATV channels. You may select Auto Tuning, ATV Manual Tuning, Programme Edit, LCN Sorting and Software Update(USB).

Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information CI Information LCN Sorting Software Update (USB) CHANNEL Move SETUP Return OK Select EXIT Exit

Auto Tuning item enables to adjust channel setting automatically.

Select Auto Tuning item, press [OK] button. Press [▲/▼] to select DVB-Type. You can select ATV/DVB-T or ATV/DVB-C.

If You select DVB-C, the additional submenu appears for DVB-C scan type.

DVB Select type

ATV/DVB-T

ATV/DVB-C

DVB-C Scan Menu
Scan type	Network Scan
Frequency	Auto
Network ID	Auto
Symbol(ks/s)	Auto

Press [◀/▶] button to select Tune Type betweenDTV, DTV+ATV and ATV.

graph TD
    A["Tune Type"] --> B["UK"]
    A --> C["New Zealand"]
    A --> D["United Arab Emirates"]
    A --> E["US"]
    F["ATV"] --> G["Estonia"]
    F --> H["Tunis"]
    F --> I["Turkey"]
    F --> J["Morocco"]
    F --> K["SETUP Return"]
    F --> L["Algeria"]
    F --> M["Egypt"]

Press [▼] button to enter Country menu. Press [▲/▼, ◀/▶] button to select Country and [OK] button to start auto searching.

Channel Tuning ATV : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Data : 0 Programme(s) 0 %... (ATV)

Select ATV Manual Tuning item, press [◀/▶]

button to select ATV Manual Tuning menu.

You may select Storage To, Sound System,

Current Channel, Search, Fine-Tune.

Storage To item Enables to select number of channel to store a program.

Current Channel item enables to select the channel number.

Sound System item enables to select sound system DK", "I", L, BG.

Fine-Tune item enables to adjust the channel frequency accurately to make the sound and picture effect better (or set channel frequency directly with number buttons).

Search item enables to adjust TV channel.

Programme Edit item enables to enter submenu to set channel Delete, Rename, Move, Skip and add to favourite list Fav.

LCN Sorting item can be changed between On and Off. Software Update (USB) enables to update the software via USB input.

ATV Manual Tuning Storage To 1 System BG Current CH 1 Search Fine-Tune Frequency 477.55 Mhz SAVE SETUP Return

Programme Edit 17 Digital ATV Delete Rename Move Skip OK OK FAV FAV SETUP Return

PICTURE

Select PICTURE section to adjust picture parameters. You may select Picture Mode, Color Temperature, Aspect Ratio, Noise Reduction and adjust Contrast, Brightness, Color, Sharpness, Tint.

Picture Mode Standard Color Temperature Aspect Ratio Noise Reduction Screen PICTURE Move SETUP Return OK Select EXIT Exit

Picture mode item can be changed between User, Dynamic, Standard and Mild. Color Temperature mode item can be changed between Normal, Cold and Warm, User. Aspect Ratio mode item can be changed between Auto, 4:3, 16:9, Zoom1 and Zoom2. Noise Reduction item can be changed between reduce noise mode: Off, Low, Middle, High and Default. You may adjust Brightness, Contrast, Colour, Sharpness, Tint for User mode.

SOUND

Select SOUND section to adjust sound parameters. You may select Sound Mode, Balance, Surront Sound, SPDIF Mode.

Sound Mode Standard Balance Surround Sound AD Switch SPDIF MODE Move SETUP Return OK Select EXIT Exit

Sound Mode item can be changed between User, Standard, Music, Movie and Sports. Balance item can be adjusted from -50 to +50 for L and R sound balance. Default value is 0. Surround Sound item can be changed between Off and Surround. SPDIF Mode item can be changed between Off, PCM or Auto.

TIME

Time menu is described in "DTV SETUP" Time section. Please refer to it for the detailed instructions.

Clock -- -- Off Time Off On Time Sleep Timer Auto Standby Time Zone London GMT TIME Move SETUP Return OK Select EXIT Exit

OPTION

Select OPTION section to select OSD Language, Restore Factory defaults, OSD Animation, OSD Time, Blue Screen.

OSD Language English Audio languages Subtitle Language Country PVR File System Restore Factory Default OSD Animation OSD Time Blue Screen MOVE SETUP Return OK Select EXIT Exit

OSD Language, Restore Factory defaults, OSD Animation, OSD Time items are discussed in DTV OPTION section and are exactly the same for ATV.

Please refer DTV manual for detailed instructions on these items.

Blue Screen item can changed between On and Off.

LOCK

Lock menu and it's items are discussed in DTV OPTION section and are exactly the same for ATV. Please refer DTV manual for detailed instructions on these items.

Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information etc. You just input the needed teletext page according to the teletext content.

TELETEXT DISPLAY

Select the channel with teletext signal.

Press [TEXT] button.

Select the corresponding page according to the colourized buttons on the remote control.

Press [TEXT] button twice again and only TV screen displays.

PAGE SELECTION

You can input 3 digit numbers to enter the page you want to watch trough number buttons. If the inputted number is invalid, you need to input correct 3 digit numbers again after you finished inputting this 3 digit numbers.

You can select to turn pages forward or backward through [CH+/-] or [/] button.

MIX MODE

This function may let you enjoy TV and teletext information at the same time.

When a certain teletext page displays, press [TEXT] button again, TV and teletext information will display on screen at the same time.

Press [TEXT] button again and only TV screen displays.

LOCK

You can press [HOLD] button to lock teletext page. Press this button again to cancel locking.

INDEX

Press [INDEX] button to display content page.

Enter a certain teletext page through inputting number buttons.

ZOOM IN TELETEXT

When teletext page shows, you may double zoom into display this teletext page.

Press [SIZE] button to zoom in the upper half part of teletext page.

Press [SIZE] button again to enter under half part of teletext page.

Press this button once more to return to original display mode.

DISPLAY MODE

Press [REVEAL] button to display the hidden teletext information. Press this button again to cancel.

COLOURIZED BUTTONS (RED, GREEN, YELLOW, BLUE)

Select the corresponding teletext page through colourized buttons.

VIDEO SETTING MENU

The menu setup of SCART/AV/COMPONENT/HDMI/USB modes is the same as that of TV mode, except the CHANNEL section. You can find it in preceding pages.

NOTE

If no signal input in DTV, ATV, SCART/AV/COMPONENT/HDMI, the screen will show as below.

NO SIGNAL

This unit will switch to standby mode automatically if no signal input more than 15 minutes.

PLEASE NOTE, THAT IF SOME ITEMS ARE INACTIVE/UNAVAILABLE (GRAYED-OUT IN THE OSD MENU) THEY ARE NOT DISCUSSED IN THIS CHAPTER. THESE ITEMS ARE DETAILED DESCRIBED IN OTHER CHAPTERS.

The VGA mode supported up to 1920X1080@60Hz, you can use this unit as a multimedia PC monitor. When this unit works in PC mode, the following setup can be done.

Press [SETUP] button on the remote control.

Through pressing [◀/▶] button on the remote control, you can select LED menu sections (menu sections consist of "CHANNEL", "PICTURE", "SOUND", "TIME", "OPTION", "LOCK"). Press [▲/▼] or [OK] button to enter this menu section.

Press [▲/▼] or [OK] button on the remote control to select the item in this menu section, and then press [◀/▶] button to adjust parameter value. Press [SETUP] button to return to main menu or [EXIT] button to exit from menu tables.

NO SIGNAL

CHANNEL

Select CHANNEL section to adjust PC channels. Only Software Update(USB) selection is available, which is discussed in DTV Setup manual.

Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information CI Information LCN Sorting Software Update (USB) CHANNEL Move SETUP Return OK Select EXIT Exit

PICTURE

Select PICTURE section to adjust picture parameters. You may select Picture Mode, Color Temperature, Aspect ratio, Screen.

Picture Mode Standard Color Temperature Aspect Ratio Noise Reduction Screen < PICTURE > Move SETUP Return OK Select EXIT Exit

Picture mode, Color Temperature and Aspect Ratio mode items are discussed in DTV Setup manual. Please refer to it for detailed instructions.

Screen item is used to adjust PC screen parameters (only available when inputting PC-RGB signal). You may select Auto Adjust, Horizontal Position, Vertical Position, Size and Phase.

Screen Auto Adjust Horizontal Pos 133 Vertical Pos 27 Size 100 Phase 100 SETUP Return

NOTE

When your PC goes into standby mode, the screen will show as bellow. This unit will go into sleep mode if no input signal in 5-20 minutes (depending on choice in TIME menu). You can wake it up by waking up your PC or pressing [POWER] button on the remote control.

SOUND

Select SOUND section to adjust sound parameters. You may select Sound Mode, Balance, Surround Sound, SPDIF Mode.

Sound Mode Standard Balance Surround Sound AD Switch SPDIF MODE Move SETUP Return OK Select EXIT Exit

Sound Mode, Balance, Surround Sound and SPDIF items are discussed in DTV Setup manual. Please refer to it for detailed instructions.

OPTION

Select OPTION section to select OSD Language, Country, Restore Factory Default, OSD Animation, OSD Time.

OSD Language, Country, Restore Factory Default, OSD Animation, OSD Time items are discussed in DTV Setup manual. Please refer to it for detailed instructions.

TIME

Time menu is discussed in "DTV SETUP" Time section. Please refer to it for the detailed instructions.

LOCK

Select LOCK section to Lock System, Set Password, Block Program and Key Lock. Lock menu is discussed in "DTV SETUP" Time section. Please refer to it for the detailed instructions.

BRIEF INTRODUCTION

This product has a USB 2.0 interface; you can play music, movie and picture files from USB equipment.

USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0. There are some types USB1.1 devices:

Monitors Communication devices, Audio, Human Input Device (HID), Mass Storage, Most flash memory, USB HDD ect. Belongs to Mass Storage Class.

Mass Storage Class includes 2 transport maners:

1. USB1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport.
2. USB1.1 Mass Storage Class Bulk-Only Transport. This unit supports USB1.1

Mass Storage Class Bulk-Only Transport, we are not sure that other USB Devices can be supported! So please find out about the features of USB equipments before using it.

NOTES

1. This product supports MP3, MPEG1, MPEG2, AVI, JPEG and BMP format files.
2. The file system supports FAT16, FAT32 and NTFS.
3. MTP (Media Transfer Protocol) is not supported.
4. Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility problem.
5. Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. The manufacturer is not responsible for any data file damage or data loss.
6. Do not disconnect the USB device while it is loading.
7. If you want to change playing mode, firstly you have to exit current playing mode through pressing [EXIT] button.
8. The higher the resolution of the image, the longer it takes to display on the screen.
9. For unsupported or corrupted files, the 'Unsupported format' message is displayed.

USB MULTIMEDIA PLAYBACK FORMAT

Media	File Extension	Code
		Video	Audio
MOVIE	.avi	Xvid, MPEG-4	MP3,WMA,AAC
	.mpg	MPEG-1,MPEG-2
	.dat	MPEG-1
MUSIC	.mp3	--	MP3
	.wma	--	WMA
	.m4a/.aac	--	AAC
PHOTO	.jpg/.jpeg	Progressive JPEG
		Baseline JPEG
	.bmp	BMP
	.png	Non-Interlaced
		Interlaced

NOTE

Before operating MEDIA menu, plug in USB device, then press [SOURCE] button to set the Input Source to USB.

Press [5□6] button to select USB in the Source menu, then press [OK] button to enter.

Press [8 / 9] button to select the option you want to adjust in the main MEDIA menu, then press OK button to enter.

PHOTO MENU

Press [◀ / ▶] button to select PHOTO in the main menu, then press [OK] button to enter. Press [EXIT] button to return back to the previous menu.

USB2.0 PHOTO MUSIC MOVIE TEXT

Press [◀ / ▶] button to select drive disk you want to watch, then press [OK] button to enter. Press [◀ / ▶] button to select return option to back to the previous menu.

PHOTO Delete

Press [◀ / ▶] button to select the file you want to watch in the file selecting menu, then press Play [▶] button to display picture.

When highlighting the option you select, the file information will appear on the right and picture will be previewed in the center.

PHOTO CAF IMAGES 1 / 1 Resolution: 2900 X 2100 Size: 397 KBytes Date: 2010 / 05 / 07 Time: 12 : 07 : 09 IMG-02.jpg Delete

Press Play▶ to play the selected file.

Press [OK] button to display menu in the bottom.

Press [◀ / ▶] button to select menu in the bottom you want to run, then press [OK] button to operate. Press [EXIT] button to back to the previous menu.

Press [◀ / ▶] button to select the file folder you want to search in the file selecting menu, then press [OK] button on your remote control to enter sub-menu.

IMG-02.jpg Pause Prev. Next Stop Music Repeat ALL Playlist Info.

Press [◀ / ▶] button to select the file you want to delete in the file selecting menu, then press red button on your remote control to delete files.

MUSIC MENU

Press [◀ / ▶] button to select MUSIC in the main menu, then press [OK] button to enter. Press [EXIT] button to return back to the previous menu.

Press [◀ / ▶] button to select drive disk you want to watch, then press [OK] button to enter.

Press [◀ / ▶] button to select return option to back to the previous menu.

Press [◀ / ▶] button to select the file you want to watch in the file selecting menu, then press [OK] button to add the file to playlist. Press Play[▶] to start playing the music.

USB2.0 PHOTO MUSIC MOVIE TEXT

MUSIC Delete

Press [◀ / ▶] button to select menu in the bottom you want to run, then press [OK] button to operate. Press [EXIT] button to back to the previous menu.

01 - U2 - With or without you 00:03:30 / 00:04:45 Pause Prev. FB Next FF Stop Repeat ALL MUTE

MOVIE MENU

Press [◀ / ▶] button to select MOVIE in the main menu, then press [OK] button to enter. Press [EXIT] button to return back to the previous menu.

Press [◀ / ▶] button to select drive disk you want to watch, then press [OK] button to enter. Press [◀ / ▶] button to select return option to back to the previous menu.

When highlighting the option you select, the file information will appear on the right and movie will be previewed in the center.

USB2.0 PHOTO MUSIC MOVIE TEXT

Press Play [ ] play the selected movie.

Press [OK] button to display menu in the bottom.

MOVIE Resolution: 688x512 Audio Track: 1/1 Subtitle: -/0 program: -/0 Size: 70073KBytes Home_video.avi Delete

Press [◀ / ▶] button to select menu in the bottom you want to run, then press [OK] button to operate.

Press [EXIT] button to back to the previous menu.

Home_video.avi 00:05:45 / 01:15:45 Pause FB FF Prev. Next Stop Repeat ALL Set A

TEXT MENU

Press [◀ / ▶] button to select [TEXT] in the main menu, then press [OK] button to enter. Press [EXIT] button to return back to the previous menu.

Press [◀ / ▶] button to select drive disk you want to watch, then press [OK] button to enter.

Press [◀ / ▶] button to select return option to back to the previous menu. When highlighting the option you select, the file information will appear on the right and text will be previewed in the center.

USB2.0 PHOTO MUSIC MOVIE TEXT

Press Button[▶] view

the selected text.

Press [OK] button to display menu in the bottom.

Press [◀ / ▶] button to select menu in the bottom you want to run, then press [OK] button to operate.

Press [EXIT] button to back to the previous menu.

TEXT LCD 23641 L3M02 DVD DVB-T CI FHD USB PVR PAL /SECAM BG/DK/I/ LL" DUR 236F41BG T4 CI) LCD 23641 L3M02 Size: 1 KBytes New Text Document.txt Delete

DVD VIDEO™

BASIC OPERATION

1. Turn ON and OFF the DVD function.

Turn on the LED TV and press [SOURCE] button on a remote control Press [▲/▼] button on the remote control to select DVD and press [OK] button to confirm your choice.

1. Insert Disc to DVD.

Insert the Disc to the Disc slot (mirror (record) side of the disc has to face towards front of the unit),

the player will load the disc automatically. There will have an on screen indication "CLOSE" then "LOADING". After loading the disc content, it will switch to play mode automatically. If the disc is already placed inside, the disc will be read automatically.

1. Play the DVD.

According to the disc content, the disc menu will display for your selection. When playing the disc, you may use button to toggle between Play and Pause mode. This product also supports Title and Repeat playback.

NOTE: For some discs, after loading the content of the disc, need to press or select from the disc menu to start. Please make sure when inserting the Disc, the mirror (record) side of the disc should be

facing you. When inserting the Disc incorrectly, you may damage the DVD mechanism.

1. Title playback (for DVD disc only).

- Press TITLE button, there will have an on screen indication "TITLE".

- Press the direction or numeric buttons to select your favorite title.

- Then will play from the first chapter of the selected title.

SUPPORTING DVD FORMAT

Disc:

CD, HDCD, VCD, DVD, CD-R, CD-RW, DVD+R, DVD-R, DVD+RW, DVD-RW

Multimedia format:

JPEG, MP3, WMA, MPEG-1, MPEG-2, MPEG-4

MPEG-4 Format:

DivX 3,xx

DivX 5,xx

WARNING! Do not insert or play 8cm disc.

80 mm DVD VIDEO

DVD FUNCTIONS OPERATING INSTRUCTIONS

1. Play

• For DVD disc, press button from root or title menu; while playing the DVD, you may play your favorite title directly with title selection by pressing the TITLE button.
• For Super VCD & VCD discs, while playing the disc, you may play your favorite tracks by numeric buttons.
• For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by numeric buttons.
• For MP3 / JPEG disc, you may play your favorite tracks by numeric buttons from the content menu.
• If input track number is not valid, it will not function.

2. Previous/Next

• Press ◀◀ button to play to the last Title / Chapter / track.
• Press ▶▶ button to play to the next Title / Chapter / track

3. Forward/ Backward

• While playing the disc, you may use forward or backward function.
• There are 4 speeds for forward. Press [◀◀/▶▶] button to toggle between different speeds in sequent. (FFx2 /FFx4 / FFx8 / FFx20 / PLAY or FRx2 /FRx4 / FRx8 / FRx20 / PLAY).

4. Pause

- Press [Ⅱ/▶] button to pause; press [▶] button to resume.

5. Repeat

• Press [REPEAT] button once to display the current repeat mode.
• There are 3 types of repeat function REPEAT (1) / REPEAT (DIR) / REPEAT (ALL).

6. Display

- Press [DISPLAY] button to activate the on screen roll-down menu for the current Title, Chapter, time and other information.

7. Goto

• This function allows you to play your favorite Title / Chapter / track.
• Press GOTO button to activate the on screen scroll-down menu for edit.
• According to the highlighted area, input your favorite Title /Chapter / Track number by numeric buttons or input the playback time. After editing, press [OK] to start.
• If the input is invalid, it will not function.

8. Audio

• Press [AUDIO] button once to display current audio mode.
• Press again to toggle between different audio modes in sequent.

9. Subtitle

• Press [SUBTITLE] button once to display current sub-title.
• Press again to toggle between different subtitle modes in sequent.

10. Mute

• Press [MUTE] button once to mute the audio output. There will have an on screen symbol indicate "MUTE".
• Press again to cancel, or Press VOL + to cancel and adjust the volume.

11. ZOOM

• Press [ZOOM+] or [ZOOM-] button to zoom in or out the picture.
• There are 3 zoom modes ZOOM2 / ZOOM3 / ZOOM4 and ZOOM1/2 / ZOOM1/3 ZOOM1/4.
• In ZOOM2, ZOOM3 and ZOOM4, you may use the navigation buttons to pan the picture for your favorite portion.

12. A-B

• In normal Playback, fast forward or fast reverse, press [A-B] button at where you want to start the repeat portion. There will have an on screen indication "REPEAT A-".
• In normal Playback, fast forward or fast reverse, press [A-B] button again at where you want to stop the repeat portion. There will have an on screen indication "REPEAT A–B".
• The repeat function started to playback the portion from A to B automatically.
• Press A-B button again to cancel. There will have an on screen indication “A–B CANCEL”.

13. Volume

- Press [VOL-/VOL+] buttons to adjust the output volume.

MP3 / JPEG / AVI PLAYBACK

After loading the MP3 / JPEG / AVI disc, it will start to scan for the stored MP3 /JPEG / AVI folders. Then will

firstly display the MP3 contents automatically.

Using the navigation buttons to check you favorite folder and playback the first file or move to the your favorite file.

NOTE:

• Press [◀/▶] buttons to move the highlight to folders, documents or mode selection.
• Press numeric buttons to select the contents directly.
• When play, press [◀◀/▶▶] button to select next / previous file.

FUNCTION SETTINGS

• Press [DVD-MENU] button to activate the DVD player OSD menu;
• Press [◀/▶] button to move and highlight between different sub-menu. Press [▲/▼] button to enter and navigate in the sub-menu.
• Press [DVD/MEN] the OSD menu.

SYSTEM SETUP

TV SYSTEM

- This menu enables you to set the picture format for your DVD.

NTSC. This format is used by some other countries, e.g. USA

PAL. This is the format used in the Europe and the default setting.

AUTO. This format can be used if your TV/DVD is capable of both PAL and NTSC formats.

SYSTEM SETUP TV SYSTEM NTSC AUTO PLAY PAL TV TYPE AUTO PASSWORD RATING DEFAULT

NOTE: PAL format is generally used for TVs in the UK. Check your TV user guide for supported formats. If NTSC is selected with a non-compatible television you may experience interference or picture scrolling.

AUTO PLAY

- You can enable or disable the autoplay function by selecting between ON or OFF.

SYSTEM SETUP TV SYSTEM AUTO PLAY ON TV TYPE OFF PASSWORD RATING DEFAULT

TV TYPE

- DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three

aspect ratios:

SYSTEM SETUP TV SYSTEM AUTO PLAY TV TYPE 4 : 3PS PASSWORD 4 : 3LB RATING 16 : 9 DEFAULT

4:3PS

Pan and Scan is used for most normal television broadcasts and it is the default setting. It has an aspect ration of 4:3. If you select this setting when viewing a DVD the picture will fill the screen but, you will not see the left and right edges of the picture.

4:3LB

Letter Box will show the DVD in its original aspect ratio so depending on the size of your television screen, you may see black borders above and below the picture.

16:9

Choose this setting if you have a widescreen television

NOTE:

• Playback screen size may vary according to the discs contents.
• For discs with 4:3 contents, using any mode would only display a 4:3 screen
• Screen ratio selection should be according to the connected TV / Display aspect ratio.

PASSWORD

• The default setting is locked. No Rating selection or change password could be done. To edit the Rating setting, please enter default password "0000" by numeric buttons, then press OK button to confirm.
• To change password, input any 4 digit number when the lock is unlocked. Once the 4 digit number is entered, that will be your new password.

SYSTEM SETUP TV SYSTEM AUTO PLAY TV TYPE PASSWORD RATING DEFAULT

RATING

• Playback for some discs with rating, you can select the rating setting according to your preference.
• Rating restriction divided in eight different category from KID SAFE to ADULT.

SYSTEM SETUP TV SYSTEM 1 KID SAFE AUTO PLAY 2 G TV TYPE 3 PG PASSWORD 4 PG13 RATING 5 PG-R DEFAULT 6 R 7 NC-17 8 ADULT

NOTE: Only editable when password is unlocked. And only can function when password is locked. It does not, however, reset either the Password or the Rating setting.

DEFAULT SETTING

- Press [OK] button to restore factory default.

SYSTEM SETUP TV SYSTEM AUTO PLAY TV TYPE PASSWORD RATING DEFAULT RESTORE

LANGUAGE SETUP

OSD LANGUAGE

- Use navigation buttons to select the OSD LANGUAGE setup icon, press OK button to confirm. There are few languages for your selection, press [▲/▼] buttons to toggle between different

languages.

LANGUAGE SETUP OSD LANGUAGE ENGLISH AUDIO LANG FRENCH SUBTITLE LANG GERMAN MENU LANG ITALIAN GREEK SPANISH PORTUGUES DUTCH

AUDIO LANGUAGE

- Use navigation buttons to select the AUDIO LANG setup icon, press [OK] button to confirm. There are few languages for you selection, press [▲/▼] buttons to toggle between different languages. Press OK button to confirm.

LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG ENGLISH FRENCH GERMAN ITALIAN GREEK SPANISH PORTUGUES DUTCH

SUBTITLE LANGUAGE

-Use navigation buttons to select the SUBTITLE LANG setup icon, press [OK] button to confirm. There are few languages for you selection, press [▲/▼] buttons to toggle between different languages. Press OK button to confirm.

LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG ENGLISH FRENCH GERMAN ITALIAN GREEK SPANISH PORTUGUES DUTCH OFF

MENU LANGUAGE

- Use navigation buttons to select the MENU LANG setup icon, press [OK] button to confirm. There are few languages for you selection, press [▲/▼] buttons to toggle between different languages. Press OK button to confirm.

LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG ENGLISH FRENCH GERMAN ITALIAN GREEK SPANISH PORTUGUES DUTCH

VIDEO SETUP

BRIGHTNESS

- Press [▲/▼] buttons to toggle between different brightness. You can adjust from 0 to 12.

BRIGHTNESS CONTRAST HUE SATURATION VIDEO SETUP 12 - 10 - 8 - 6 - 4 - 2 0

CONTRAST

- Press [▲/▼] buttons to toggle between different contrast. You can adjust from 0 to 12.

BRIGHTNESS CONTRAST HUE SATURATION VIDEO SETUP 12 - 10 - 8 - 6 - 4 - 2 0

HUE

- Press [▲/▼] buttons to toggle between different hue. You can adjust from -6 to +6

BRIGHTNESS CONTRAST HUE SATURATION VIDEO SETUP +6 - +4 - +2 - 0 - -2 - -4 - -6

SATURATION

- Press [▲/▼] buttons to toggle between different saturation. You can adjust from 0 to 12.

BRIGHTNESS CONTRAST HUE SATURATION 12 - 10 - 8 - 6 - 4 - 2 0 VIDEO SETUP

SPEAKER SETUP

DOWNMIX

- Use navigation buttons to select LT/RT or STEREO option:

LT/RT- Left/Right mix mode

STEREO- Select this option if you don't have a 5.1 channels amplifier.

SPEAKER SETUP DOWNMIX LT / RT SUBWOOFER CENTER DELAY REAR DELAY STEREO

SUBWOOFER

- Use navigation buttons to select ON or OFF.

SPEAKER SETUP DOWNMIX SUBWOOFER OFF CENTER DELAY ON REAR DELAY

CENTER DELAY

- Use navigation buttons to toggle between delay. You can adjust in a range of (0ms, 2ms and 4 ms).

SPEAKER SETUP DOWNMIX SUBWOOFER CENTER DELAY REAR DELAY + - 4 MS - 2 MS 0 MS

REAR DELAY

- Use navigation buttons to toggle between delay. You can adjust in a range of (0ms, 6ms and 12 ms).

SPEAKER SETUP DOWNMIX SUBWOOFER CENTER DELAY REAR DELAY + - 12 MS - 6 MS 0 MS

CARE AND MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the screen

1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time(such as a vacation), it's a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

If you expect to leave your TV dormant for a long time (such as a vacation), it's a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

Handing Discs

1. To remove a disc from its storage case, press on the centre of the case and take the disc out.
2. Hold the disc by the edges, to avoid touching the Recorded side of the disc.

Line drawing of a hand holding a circular object with a central hole (no text or symbols)

Cleaning discs

1. Fingerprints and dust should be carefully wiped from the disc's surface with a soft Cloth. Audio discs and DVD discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains should have no effect on reproduction quality.
2. Never use chemicals such as record sprays, antistatic sprays, Benzine, or thinners to clean the discs. These chemicals can irreparably damage the disc's surface.
3. Discs should be returned to their cases after use. This avoids serious scratches that could cause the laser pickup to skip.
4. Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods. Exposure to high temperatures can warp the disc.
5. Do not stick paper or write anything with a ball point pen on the label side of the disc.

Illustration of a hand holding a pinwheel with a directional arrow (no text or symbols)

Please check for causes of problems in accordance with the following chart before contacting any maintenance personnel.

DISPLAY TROUBLESHOOTING

Symptom	Causes and Correction
Black screen, power indicator light off	◆ Check whether power cord is well connected, and whether this unit is power on
	◆ Check whether the signal cord of input device is well connected◆ Check whether input device is power on
Image display flicker, unstable	◆ Check whether the input device signal is in this unit's specification
	◆ Check computer output mode: control panel-display-setup◆ If the setup does not accord with this unit's specification, please change the display setup
	◆ Hor scanning frequency: 30KHz~75KHz◆ Ver scanning frequency: 50 Hz-75Hz

SOUND AND TV TROUBLESHOOTING

Symptom	Causes and Correction
Cannot power on	◆ Please make sure the well connecting of power cord
No sound	◆ Please make sure the well connecting of audio cord
	◆ Check volume
	◆ Make sure there is nothing plugged in the headphone jack
Volume too low	◆ Check volume
	◆ If volume is still too low when adjusting volume to maximum, please check whether the input device is well set
Snowy picture	◆ Input antenna damaged or not well connected
Remote control failure	◆ Check whether remote control battery used up◆ Whether battery installation is correct◆ Whether obstacles exists between remote control and the unit's receiving window◆ Check whether receiving window has strong light

DVD TROUBLESHOOTING

Symptom	Causes	Correction
Not play	1. Condensation on laser head2. Disc not properly loaded3. Disc not compatible with the unit	1. Switch on power and wait for 1 to 2 hours2. Make sure label side of the disc facing up3. Confirm whether this unit compatible with the placed disc
Sound distortion	1. Too large volume of connected device2. Sound field mode not suitable for disc	1. Adjust the device volume2. Adjust appropriate sound field
No sound	1. Disc warped or dirty2. The unit in mute state	1. Clean the disc2. Press MUTE button to cancel it.
No image	1. TV not set for proper system	1. Reset AV/TV state of TV
No color	1. TV system not right2. TV color not well adjusted	1. Try to change the color system2. Reset the TV color
No disc reading	1. Disc warped or dirty2. Disc not correctly placed3. Condensation on laser head	1. Clean the disc2. Reload a disc with label side facing up3. Witch on power, unload disc and leave it for about 1 hour
Temporary function failure	1. Mal-fabricated disc used2. Wrong buttons pressed3. Static leakage into the unit from outside	1. Wait for 5 to 10 seconds to restore to normality automatically2. Operate again3. Power off for 1 to 2 minutes to power on again
No subtitle	1. No subtitle made in disc2. The unit subtitle is turned off	1. Disc problem2. Press Subtitle button to select it
Image rolling	1. System setup not suitable for disc	1. Adjust system mode

• If the above methods still cannot solve the problems or the troubles are special, please contact the local maintenance personnel.

♦ LED screen	Type		TFT color31,5"-80 cm
♦ Frequency	Hor scanning frequencyVer scanning frequencyDisplay color		30 KHz~80 KHz50 Hz~75 Hz16.7M color ( )
♦ Display mode	Recommended modeMax mode		1920 X 1080 (Full HD)
Panel Life	Hours		50 000
Input signal	Synchronous signalVideo signal		H/V separation, TTL positive/negative;H/V composite, TTL positive/negativeGreen synchronous, 0.3Vp p,negative0.7 Vp p@75ohm
TV/Video	Image systemAudio systemVideo form		PAL/SECAM/NTSC(In video mode)DK/I/BG/LCVBS、RGB, YPbPr,VGA
Power From	AC		~ 100V-240V(50/60) Hz
Environmental factor		Working temperatureWorking humidityStoring temperatureStoring humidity	5°C 3 °C 5 ~10 80%%~-20°C 45°E5 95%%~
Media play (USB)		File format	MP3, MPEG1, MPEG2, AVI, JPEG and BMP
Audio parameter		Audio inputFrequency response	Φ3.5jack(L,R),0.5±0.3VrmsTV signal: 100 Hz 12 KHz(-3dB)~AV: 100 Hz~15 KHz (-3dB)
DVD		Disc type	DVD VIDEOMPEG4 *; SVCD**VCD1.0, 1.1, 2.0 version; CD-DA
Digital TV		Digital tunerInput connectorFrequencyrange (VHF/UHF)Channel range(VHF/UHF)	DVB-T/C MPEG2, MPEG4 (H.264)IEC-Type, IEC 169-2, Female174MHz-858MHz7 & 8 Mhz

Hint: the items with "♦" symbol are related to LED screen. Specifications and design are subject to change without notice.

* Some discs labelled with MPEG 4 on the market actually are *.rm/* .ram/* .rmm and others which are not compatible. Please take care when buying discs.
** This unit cannot play some SVCD discs with VCD format.

Because of disc quality and format difference, we cannot make sure smoothly read all discs; some functions cannot be fulfilled for the disc speciality, but not machine trouble.

Disposal of Used Electrical & Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Simple line drawing of a computer monitor with a circular base and abstract lines at the base (no text or symbols)

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

SALORA

TELEVISEUR LED COULEUR

Simple line drawing of a computer monitor with a stand and abstract lines (no text or symbols)

32LED6105CD

32LED6115CDW

MANUEL DE L'UTILISATEUR (FR)

A LIRE ATTENTIVEMENT AVANT L'UTILISATION

Diagram of a device layout with labeled components and directional arrows (no text or symbols)

9LV M4x10

Diagram of a device interior with labeled components and directional arrows indicating movement or force (no text or symbols present)

9LV0 [ ]

Diagram of a device interior with labeled components and directional arrows indicating movement or force (no text or symbols present)

Formats DVD supports 39

Line drawing of a computer monitor with two labeled ports (1 and 2) on the side, no text or symbols present.

PANNEAUX DES TOUCHES

1 2 3 4 5 6 7 8 9 %II ▲ SOURCE MENU CH- CH+ VOL- VOL+ ●

Diagram showing various audio and video connectors with labels such as antenna, USB, audio jack, and audio cable connections.

i REMARQUE

Three-step diagram showing battery charging process: moving, adding, and discharging (no text or symbols)

AUTONOMIE DES PILES

CI Information Viaccess Conditional Access Main menu System information Smart card management Language setting Press 'OK' to enter; Press 'EXIT' to return

AJUSTER L'ORA. MODE MIXTE SUPER-WOOFER DIFFÉRER CENT DIFFÉRER ARRI + - 4 MS - 2 MS 0 MS

DIFFÉRER ARRI

AJUSTER L'ORA. MODE MIXTE SUPER-WOOFER DIFFÉRER CENT DIFFÉRER ARRI + 12 MS - 6 MS 0 MS

SOIN ET ENTRETIEN

Line drawing of a hand holding a circular object with a central hole (no text or symbols)

Illustration of a hand holding a pinwheel with a directional arrow indicating rotation (no text or symbols)

Simple line drawing of a computer monitor with a circular base and abstract sketch lines at the bottom (no text or symbols)