PicoPix PPX2055 - Projector PHILIPS - Free user manual and instructions
Find the device manual for free PicoPix PPX2055 PHILIPS in PDF.
| Product Type | Pocket Projector |
| Brand | Philips |
| Model | PicoPix PPX2055 |
| Display Technology | DLP (WVGA 0.3") |
| Resolution | 854 x 480 pixels (16:9) |
| Brightness | Up to 55 lumens |
| Contrast Ratio | 1000:1 |
| Projected Image Size | 12 to 120 inches |
| Projection Distance | 20 to 120 inches |
| Light Source | RGB LED |
| Power Supply | Via USB (Y-USB cable recommended) |
| Dimensions (L x H x W) | 2.83 x 1.06 x 2.83 inches |
| Weight | 4.08 oz |
| Supported Resolutions | SVGA, XGA, WXGA |
| Horizontal Scan Rate | 31 - 69 kHz |
| Vertical Scan Rate | 56 - 85 Hz |
| Operating Temperature | 5 - 35°C |
| Relative Humidity | 15 - 80% (non-condensing) |
| Minimum PC Requirements | Intel Pentium M / AMD Athlon 2GHz, 1GB RAM, 40MB free HDD, USB 2.0, Windows XP/Vista/7 or Mac OS 10.6 |
| Interface | Mini-USB port |
| Focus Adjustment | Manual focus wheel |
| Software | Picopix Fun Viewer (Windows & Mac) |
| Safety | Do not stare into lens; keep away from heat, moisture, and dust |
| Repairs | Only by authorized service center |
| Tripod Mount | Recess for tripod adapter |
Frequently Asked Questions - PicoPix PPX2055 PHILIPS
User questions about PicoPix PPX2055 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Projector in PDF format for free! Find your manual PicoPix PPX2055 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PicoPix PPX2055 by PHILIPS.
USER MANUAL PicoPix PPX2055 PHILIPS
Register your product and get support at
www.philips.com/support
PicoPix
PPX2055
natural_image
Black Philips projector with visible lens and ventilation slots (no text or symbols on device body)EN User Manual 2
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
General Safety Information
Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated.
Setting Up the Device
Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.
The device must have sufficient ventilation and should not be covered. Do not put your device in closed cabinets or boxes.
In the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately disconnect the device from the USB socket. Have your device examined by trained professionals at a technical service location. To prevent the spread of fire, open flames should be kept away from the device.
Do not plug in the device in humid rooms. Never touch the electrical cable or the electrical connection with wet hands.
Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions:
· if the device is moved from a cold to a warm area;
· after a cold room is heated;
· when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
I Seal this device in a plastic bag be fore moving it to another room, in order for it to adapt to room conditions.
2 Wait one to two hours before you take the device out of the plastic bag.
The product shall not be exposed to dripping or splashing and that no object with liquids, such as vases.
The device should not be used in a very dusty environment. Dust particles and other foreign objects may damage the product.
Do not expose the device to extreme vibrations. It may damage the internal components.
Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.
The product should be supplied by a power system compliant with LPS requirements of 2.5 of UL60950-1.
Repairs
Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Have your device repaired only by an authorised service center.
Do not remove the type label from your device; this would void the warranty.
DANGER!
Danger of Damage to the Eye by High Power LED
This device is equipped with an high power LED (Light Emitting Diode), which emits very bright light. Do not stare directly into the projector lens to avoid eyes injury or irritations.
Top of the Device
① Focus setting
② Mini-USB port
natural_image
Line drawing of a rectangular electronic device with labeled parts (1 and 2), showing internal structure without any text or symbols.Bottom of the Device
① Recess for Tripod Adapter
natural_image
Illustration of a rectangular electronic device with a central display and labeled component (no text or symbols beyond label)2 Basic Operation
Installing the Software
I Close all open programs and applications before beginning the installation process.
2 Connect the device with a USB cable to your computer.
3 Select PicoPix 2055 as drive in the Windows Explorer and start the program Picopix Fun Viewer Setup_Windows.exe or Picopix Fun Viewer Setup_MAC.hqx according to the OS being used.
4 Your computer will now prepare for the installation process. Follow the instructions of the installation wizard and restart the computer.
Note
Disconnect the Device from the Computer
Disconnect the device from the computer before restarting. The computer may try to boot from the Pocket Projector, which was recognized as a USB storage device.
Set up the Device
Connect the device to your computer on two USB ports by means of the Y-USB cable in order to ensure the full performance of the device.
2 Start the program Picopix Fun Vi ewer. A symbol appears in the statusbar. The Pocket Projector is switched on and projects the image from the computer. A window opens where you can choose between mirrored or advanced projection as well as setting the brightness.
Note
Screen Resolution of the Computer
The best picture quality can be reached, if the screen resolution of the computer is set to 800 × 600 pixel.
Note
Brightness of Projector
At first installation the devices starts with minimum level of brightness.
3 Adjust the focus using the focus wheel.
4 Disconnect the USB cable from the compute r when you finish the presentation to save energy and exit Picopix Fun Viewer.
Note
Exit the Program Picopix Fun Viewer
Click on the button Exit in the software or do the following:
I) Click on the Picopix Fun Viewer symbol in the Windows task bar using the right mouse key.
2) Click on Exit.
Uninstalling the Software
I Close all open programs and applications before beginning the uninstall process.
2 If you use Windows OS: Load the uninstall program by clicking on Picopix Fun Viewer > Uninstall Picopix Fun Viewer in the start menu.
3 If you use MACOS : Load the unin clicking on Application > Utilities > PicoPix viewer.uninstall.
4 Follow the instructions on the screen.
5 At the conclusion of the uninstall process you must restart your computer.
6 After rebooting has occurred, removal of Picopix Fun Viewer from your computer will be complete.
Technical Data
Technology / Optical
Display technology......WVGA 0,3" DLP
Light source....RGB LED
Resolution.... 854×480 pixel (16:9)
Supported Resolutions ......SVGA/XGA/WXGA
Brightness (Bright Mode) up to 55 lumen
Contrast ratio....1000:1
Projected image size....12-120 inch
Screen distance....20-120 inch
Horizontal Scan Rate 31–69 kHz
Vertical Scan Rate.... 56–85 Hz
Power Supply....via USB plug
Dimensions (L×H×W).... 2.83×1.06×2.83 inch
Weight....4.08 oz
Recommended Ambient....5-35°C
Relative Humidity....15–80% (non-condensing)
Minimum PC Requirements
Processor....Intel Pentium M or AMD Athlon Clock rate....2GHz
Operating System .....Windows XP Professional (SP2), .....Vista, Windows 7, Mac OS 10.6
RAM ...... IGB DDR SDRAM
Free Hard Drive Space....40 MB
USB Port ...... USB 2.0
All data are provided for reference purposes only. Sagemcom Documents SAS reserves the right to make any changes without prior notice.
The CE marking certifies that the product meets the main requirements of the European Parliament and Council directives 2006/95/CE, 2004/108/CE and 2009/125/CE on telecommunications terminal equipment, regarding safety and health of users and regarding electromagnetic interference.
The declaration of compliance can be consulted on the site www.picopix.philips.com.
Preservation of the environment as part of a sustainable development plan is an essential concern of Sagemcom Documents SAS. The desire of Sagemcom Documents SAS is to operate systems observing the environment. The desire of Sagemcom Documents SAS is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of this product, from manufacturing to commissioning use and elimination.
FCC notice: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste.
Trademarks: The mentioned references in this manual are trademarks of the respective companies. The lack of the trademarks ® and ™™ does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Sagemcom Documents SAS disclaims any and all rights in those marks.
Neither Sagemcom Documents SAS nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Sagemcom Documents SAS operating and maintenance instructions.
Sagemcom Documents SAS shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Sagemcom Documents SAS products or Sagemcom Documents SAS approved products.
Sagemcom Documents SAS shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Sagemcom Documents SAS products.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Sagemcom Documents SAS. The information contained herein is designed only for use with this product. Sagemcom Documents SAS is not responsible for any use of this information as applied to other devices.
This user manual is a document that does not represent a contract.
Errors, printing errors and changes are reserved.
Copyright © 2012 Sagemcom Documents SAS
I A perçu
Très cher client
natural_image
Line drawing of a rectangular electronic device with labeled parts (1 and 2), showing internal structure without any text or symbols.natural_image
Illustration of a retro computer with labeled component (no text or symbols present)2 Mise en service
Copyright © 2012 Sagemcom Documents SAS
I Es quema
Estimado cliente
natural_image
Line drawing of a rectangular electronic device with labeled parts (1 and 2), showing internal structure without any text or symbols.Parte inferior del aparato
natural_image
Illustration of a rectangular electronic device with a central display and labeled component (no text or symbols beyond label)Copyright © 2012 Sagemcom Documents SAS
PHILIPS and the PHILIPS' Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used by Sagemcom Documents SAS under license from Koninklijke Philips Electronics N.V.
© 2012 Sagemcom Documents SAS
All rights reserved
Documents Business Unit
- General Safety Information
- Setting Up the Device
- Repairs
- DANGER!
- Danger of Damage to the Eye by High Power LED
- Top of the Device
- Bottom of the Device
- Basic Operation
- Installing the Software
- Note
- Disconnect the Device from the Computer
- Set up the Device
- Screen Resolution of the Computer
- Brightness of Projector
- Exit the Program Picopix Fun Viewer
- Uninstalling the Software
- Technical Data
- Technology / Optical
- Minimum PC Requirements
- I A perçu
- Très cher client
- Mise en service
- I Es quema
- Estimado cliente
- Parte inferior del aparato
Brand : PHILIPS
Model : PicoPix PPX2055
Category : Projector