DVP-SR90 - DVD player SONY - Free user manual and instructions

USER MANUAL DVP-SR90 SONY

Operating Instructions

DVP-SR90

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The mains lead must only be changed at a qualified service shop.

Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.

CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT

This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

Notice for customers in the United Kingdom and Republic of Ireland

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with or (mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve

natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.

To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Precautions

Safety

- This unit operates on 220 – 240 V AC, 50/60 Hz. Check that the unit's operating voltage is identical with your local power supply.

• To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Installing

- Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

- Keep the unit and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

- Do not place heavy objects on the unit.

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the set due to lightning and powerline surges.

Notes about the discs

- To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction.

Illustration of a hand holding a circular object with a central rod (no text or symbols)

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.
  • After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
• Wipe the disc from the centre out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.
• If you have printed the disc's label, dry the label before playing.

Precautions

On safety

Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

On power sources

• The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
• If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

• Place the player in a location with adequate ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as a rug.
• Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
• Do not install this player in a confined space, such as a bookshelf or similar unit.
• Install the player so that the AC power cord (mains lead) can be unplugged from the wall socket immediately in the event of trouble.

On operation

• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.
• When you move the player, take out any discs. If you don't, the disc may be damaged.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners (including wet or spray types). These may cause the apparatus to malfunction.

On replacement of parts

In the event that this unit is repaired, repaired parts may be collected for reuse or recycling purposes.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

Table of Contents

WARNING 2

Precautions 3

About This Manual....5

Guide to Parts and Controls....6

Hookups. 9

Step 1: Connecting to Your TV 9

Step 2: Connecting the Mains Lead....11

Step 3: Preparing the Remote ..... 11

Controlling your TV with the supplied remote 11

Step 4: Quick Setup 13

Playback 15

Playing Discs 15

Control Menu display (Magic Pad)....17

List of Control Menu items 18

Various Play Mode Functions 20

Creating your own programme (Programme Play) 20

Playing in random order (Shuffle Play) 21

Playing repeatedly (Repeat Play) 21

Repeating a specific portion (A-B Repeat Play). 22

Customizing the Playback Configuration 23

Adjusting the playback picture(CUSTOM PICTURE MODE) ..... 23

Sharpening the picture (SHARPNESS) 23

Locking discs (PARENTAL CONTROL) 23

Playing MP3 Audio and JPEG Images 24

Selecting a JPEG image file 25

Setting the pace for a slide show (INTERVAL) 26

Selecting the slides' appearance (EFFECT) 26

Playing DivX Video Files 27

Settings and Adjustments 28

Using the Setup Display....28

LANGUAGE SETUP 28

SCREEN SETUP 29

CUSTOM SETUP 30

AUDIO SETUP....31

Setting the digital output signal 31

Additional Information 33

Troubleshooting 33

Self-diagnosis Function (When letters/numbers appear on the screen) .... 35

Playable Discs 35

Specifications. 37

Language Code List....38

Parental Control Area Code List 38

Index 39

About This Manual

• Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote.
• “DVD” may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+R DLs (+VR mode) and DVD-RWs/DVD-Rs/DVD-R DLs (VR mode, video mode).
• NEED-to-know information (to prevent incorrect operation) is listed under the 🔒 icon. NICE-to-know information (tips and other useful information) is listed under the 🔊 icon.
• The meaning of the icons used in this manual is described below:

Icons Meaning
DVDVideo	Functions available for commercial DVDs and DVD+RWs/DVD+Rs/DVD+R DLs in +VR mode or DVD-RWs/DVD-Rs/DVD-R DLs in video mode
DVDVR	Functions available for DVD-RWs/DVD-Rs/DVD-R DLs in VR (Video Recording) mode
VCD	Functions available for VIDEO CDs (including Super VCDs or CD-Rs/CD-RWs in video CD format or Super VCD format)
CD	Functions available for music CDs or CD-Rs/CD-RWs in music CD format
DATA	Functions available for DATA discs containing MP3*1audio tracks, JPEG image files, and DivX*2video files

*1 MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio data.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

*2 DivX® is a video file compression technology, developed by DivX, Inc.

DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license

Guide to Parts and Controls

For more information, see the pages indicated in parentheses.

Remote

PICTURE NAVI TV TV I/O I/O 1 2 3 4 5 6 7 8 9 TIME/TEXT CLEAR 0 AUDIO SUBTITLE TOP MENU MENU RETURN DISPLAY FAST/SLOW PLAY

△ (volume) +, number 5, AUDIO, and ▶ buttons have a tactile dot. Use the tactile dot as a reference when operating the player.

1 PICTURE NAVI (25)

Divides the screen into 9 subscreens so you can choose the desired scene quickly.

Each time you press the button, the display changes as follows:

• CHAPTER VIEWER
• TITLE VIEWER
- TRACK VIEWER
The JPEG image files in the album appear in 16 subscreens.

TV → (input select) (11)

Switches the TV's input source between the TV and other input sources.

TV I/⏻ (on/standby) (11)

Turns the TV on or to standby mode.

I/⏻ (on/standby) (13)

Turns on, or sets the player to standby mode.

△ (volume) +/- (11)

Adjusts the TV volume.

2 Number buttons

Enters the title/chapter numbers, etc.

CLEAR (18)

Clears the entry field.

3 TIME/TEXT (24, 27)

Displays the playing time and remaining time. Press repeatedly to change the displayed information. CD/DVD text appears only when text is recorded on the disc. If an MP3 audio track has an ID3 tag, the player will display the album name/track title from the ID3 tag information. This player supports ID3 versions 1.0/1.1 and 2.2/2.3.

AUDIO ( )

Changes the audio language or audio channel.

When 4 digits are displayed, they indicate a language code. See "Language Code List" on page 38 to see which language the code represents.

The format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown on page 7.

◆When playing a DVD VIDEO

Example:

Dolby Digital 5.1 ch

Rear (L/R) 1 ENGLISH DOLBY DIGITAL 3 / 2 .1 Front (L/R) + Centre LFE (Low Frequency Effect)

◆When playing a DivX video file on a DATA disc

Example:

MP3 audio

1: MP3 128k Bit rate

SUBTITLE ( ) (26)

Changes the subtitles.

4 TOP MENU

Displays the DVD's top menu.

MENU (24)

Displays the menu.

RETURN (16)

Returns to the previous display.

DISPLAY (17)

Displays the playback information on the screen.

←/↑/↓/→ (13)

Moves the highlight to select a displayed item.

Centre button (ENTER) (13)

Enters the selected item.

5 ◀◀◀/▶▶▶I (previous/next)

←• ◀// (replay/step/step/advance)

◀◀◀/▶▶▶ (scan/slow)

▶ (play)

II (pause)

■ (stop)

FAST/SLOW PLAY

See “Basic operations” (page 7) for the function of each button.

Basic operations

To Operation
Play Press	▶.
Stop Press ■.
Pause Press ▪.
Go to the next chapter, track, or scene in continuous play mode	Press ▶▶1.
Go back to the previous chapter, track, or scene in continuous play mode	Press ▶◀◀.
Scan backward/ forward	Press ◀◀/ ▶▶ ▶▶Press repeatedly to change the speed.
Replay the previous scene*1*3	Press ←• ◀|| (replay) during playback.
Briefly fast forward the current scene*2*3	Press ||▶ •→ (advance) during playback.
Play backward*4/ forward*5 in slow motion	Press ▪ during playback, then press ◀◀◀/▶▶▶▶▶ repeatedly.
Play backward*4/ forward*5 one frame at a time	Press ▪ during playback, then press ←• ◀||/||▶ •→.
Play in various speed with sound*6	Press FAST/SLOW PLAY repeatedly during playback.

*1 For all DVDs except for DVD+RWs/DVD+Rs/DVD+R DLs and DivX video files.
*2 For DVDs and DivX video files only.
*3 These functions may not work with some scenes.
*4 For DVD VIDEOs and DVD-VR mode only.
*5 For DVDs, VIDEO CDs and DivX video files only.
^*6 For DVDs and VIDEO CDs only.

Front panel

1 2 3 4 5 6 7

1 I/ (on/standby) button (13)
②Disc tray (15)
3Front panel display (16)
4 (remote sensor) (11)

5 ▲ (open/close) button (15)
6▶ (play) button (15)
7 ■ (stop) button (15)

Rear panel

1 2 DIGITAL CUT 30004 LINE (RGB) -TV

① DIGITAL OUT (COAXIAL) jack (10)

② LINE (RGB) - TV jack (9)

When unpacking, check the supplied accessories by referring to page 37.

[NO TEXT]

• Plug cables securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting to Your TV

Connect this player to your TV monitor, or projector using an audio/video (SCART) cable. This connection will use your TV speakers for sound.

CD/DVD player to LINE (RGB)-TV SCART cable (not supplied) : Signal flow TV

Be sure to make the connections firmly to avoid hum and noise.

When using this connection, check that the TV conforms to RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “RGB” under “SCREEN SETUP” in the Setup Display (page 29), use a SCART cable that conforms to RGB signals.

When connecting to a standard 4:3 screen TV

Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see page 29.

[NO TEXT]

• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen.
• When you connect the player to your TV via the SCART jack, the TV's input source is set to the player automatically when you start playback. In this case, press TV → (input select) on the remote to return the input to the TV.

When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the Setup Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions. In this case, open the disc tray and remove the disc.

To connect to your audio component

Use the following pattern.

CD/DVD player

to DIGITAL OUT (COAXIAL) DIGITAL OUT COAXIAL Coaxial digital cable (not supplied) to coaxial digital input Audio component with a decoder

: Signal flow

- In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE (RGB)-TV (SCART) jack, even if you set “DTS” to “ON” in Quick Setup (page 13).

For correct speaker location, see the operating instructions supplied with the connected components.

If your audio component has a Dolby ^1 Digital, DTS ^2 , or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effect.

^*1 Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
*2 Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

[NO TEXT]

• After you have completed the connection, make the appropriate settings in Quick Setup (page 13). If your audio component has an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” (page 32). Otherwise, no sound or a loud noise will come from your speakers.
• The TVS effects of this player cannot be used with this connection.

Step 2: Connecting the Mains Lead

Plug the player and TV mains lead (power cord) into a mains.

Step 3: Preparing the Remote

You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the and ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor in the player.

Technical line drawing of a mechanical component with no visible text or symbols

[NO TEXT]

• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Controlling your TV with the supplied remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

TV→ TV Number buttons 1 2 3 4 5 6 7 8 9 CLOSE AUDIO CURRENT TOP MOUNTED OUTPUT I/O +/-

You can control your TV using the buttons below.

By pressing You can

TV I/○ Turn the TV on or off
△ (volume) +/- Adjust the volume of the TV
TV → (input select)	Switch the TV's input source between the TV and other input sources

3

Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

To control other TVs with the remote

You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer's code.

1 While holding down TV I/☐, press the number buttons to select your TV's manufacturer's code (see the table below).

2 Release TV I/☐.

◆Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code number

Sony 01 (default)

Hitachi 24

JVC 33

LG/Goldstar 76

Panasonic 17, 49

Philips 06, 08, 72

Samsung 71

Sharp 29

Toshiba 38

[NO TEXT]

• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
• Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press ▶▶. To return to the previous adjustment, press ◀◀.

I/O TIME CLEAR AND I/O ENTER ↑/↓ CREATE DISPLAY OPENING PLAYS

1 Turn on the TV.
2 Press I/⏻.

The player turns on.

3 Switch the input selector on your TV so that the signal from the player appears on the TV screen.

"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message does not appear, select "QUICK" under "SETUP" in the Control Menu to run Quick Setup (page 18).

4 Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP OSD: ENGLISH MENU: ENGLISH AUDIO: FRANÇAIS SUBTITLE: DEUTSCH ESPAÑOL NEDERLANDS DANSK SVENSKA

5 Press ↑/↓ to select a language.

The player displays the menu and subtitles in the selected language.

6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: 16:9 BACKGROUND: 4:3 LETTER BOX LINE: 4:3 PAN SCAN

7 Press ↑/↓ to select the setting that matches your TV type.

◆If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode
• 16:9 (page 29)
◆If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN (page 29)

8 Press ENTER.

The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears.

SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE LINE: VIDEO VIDEO RGB

9 Press ↑/↓ to select the type of signal you want to output from the LINE (RGB)-TV jack.

◆Video signals
• VIDEO (page 29)
◆RGB signals
- RGB (page 29)

10Press ENTER.

The Setup Display for selecting the type of jack used to connect your audio component such as an amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ? YES DIGITAL OUTPUT NO

11 Press ↑/↓ to select the type of jack (if any) you are using to connect to an audio component, then press ENTER.

If you did not connect an audio component, select "NO," then go to step 15.

If you connected an audio component using coaxial digital cable, select "YES: DIGITAL OUTPUT."

12 Press ↑/↓ to select the type of Dolby Digital signal you wish to send to your audio component.

If your audio component has a Dolby Digital decoder, select "DOLBY DIGITAL." Otherwise, select "D-PCM."

AUDIO SETUP AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: DOLBY DIGITAL MPEG: DOLBY DIGITAL DTS: D-PCM 48kHz/96kHz PCM: 48kHz/16bit

13Press ENTER.

“DTS” is selected.

AUDIO SETUP AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: DOLBY DIGITAL MPEG: PCM DTS: OFF 48kHz/96kHz PCM: OFF ON

14Press ↑/↓ to select whether or not you wish to send a DTS signal to your audio component.

If your audio component has a DTS decoder, select "ON." Otherwise, select "OFF."

15Press ENTER.

Quick Setup is finished and connections are complete.

If your audio component has an MPEG audio decoder, set “MPEG” to “MPEG” (page 32).

Playback

Playing Discs DVDvideo DVDVR

VCD CD DATA

Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

Number buttons I/O RETURN ENTER RETURN POWER OUTPUT

1 Press ▲ on the player, and place the disc on the disc tray.

Illustration of a hand using a tool to press a circular object on a base (no text or symbols visible)

Playback side facing down

2 Press ▶.

The disc tray closes. The player starts playback (continuous play). Adjust the volume on the TV or the audio component.

Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOS, see page 7. For VIDEO CDs, see page 16.

To stop playback Press ■.

To pause playback Press Ⅱ.

You can have the player turned off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set "AUTO POWER OFF" in "CUSTOM SETUP" to "ON" or "OFF" (page 30).

Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.

Note on playing DTS sound tracks on a DVD VIDEO

DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.

To resume playback from the point where you stopped the disc

When you press ▶ again after you stop playback, the player starts playback from the point when you pressed ■.

To play from the beginning of the disc, press ■ twice, then press ▶.

Resume Play does not work during Shuffle Play and Programme Play.

To play VIDEO CDs With PBC Functions (PBC Playback) VCD

PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen.

When you start playing a VIDEO CD with PBC functions, the menu for your selection appears.

Select an item using the number buttons, and press ENTER. Then, follow the instructions in the menu for interactive operations (press ▶ when “Press SELECT” appears).

Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD.

To return to the menu

Press 📋 RETURN.

To play without using PBC, press ◀◀◀/▶▶▶ or the number buttons while the player is stopped to select a track, then press ▶▶ or ENTER.

“Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu.

To return to PBC playback, press ■ twice then press ▶.

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent children from opening it.

When the player is in standby mode, press RETURN, ENTER, and I/ on the remote.

The player turns on and “” (LOCKED) appears on the front panel display. The ▲ button on the player does not work while the Child Lock is set.

To unlock the disc tray, press ⬇️ RETURN, ENTER, and ⏻ again when the player is in standby mode.

Even if you select “RESET” under “SETUP” in the Control Menu (page 18), the disc tray remains locked.

Control Menu display (Magic Pad)

Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows:

graph TD
    A["Control Menu display 1"] --> B["Control Menu display 2 (Except CD)"]
    B --> C["Control Menu display off"]

The Control Menu display 1 and 2 will show different items depending on the disc type.

Example: Control Menu display 1 when playing a DVD VIDEO.

Press ↑/↓ to select the Control Menu item, then press ENTER.

For details about the item, see “List of Control Menu items” (page 18, 19).

Control Menu items Selected item Function name of selected Control Menu item Operation message Currently playing chapter number*2 Currently playing title number*1 Total number of titles*1 Total number of chapters*2 1 2 (2 7) 1 8 (3 4) T 1 : 3 2 : 5 5 OFF OFF SET → ON DVD VIDEO Playback status (► Playback, ■ Pause, ■ Stop, etc.) Type of disc being played*3 Playing time*4 Current setting Options PROGRAM ENTER DISPLAY Quit:

*1 Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for DATA discs.
*2 Displays the index number for VIDEO CDs, MP3 audio track number, JPEG image file number, or DivX video file number for DATA discs.
*3 Displays Super VCD as "SVCD."
*4 Displays the date for JPEG files.

List of Control Menu items

Item Item Name, Function

TITLE/SCENE/TRACK

CHAPTER/INDEX

TRACK

Selects the title, scene, track, chapter, or index to be played.

1 Press ↑/↓ to select the search method.

“** (**)” is selected (** refers to a number).

2 Press ENTER.

“** (**)” changes to “-- (**).”

3 Press the number buttons to select the number you want to search.

4 Press ENTER.

TIME/TEXT

Checks the elapsed time and the remaining playback time. Input the time code for picture and music searching (DVD and DivX video files only).

1 Press ENTER.

2 Input the time code using the number buttons, then press ENTER.

For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, just enter "2:10:20."

[NO TEXT]

You cannot search for a scene on a DVD+RW/DVD+R/DVD+R DL using the time code.

ORIGINAL/PLAY LIST

Selects the type of titles (DVD-VR mode) to be played, the ORIGINAL one, or an edited PLAY LIST.

PROGRAM (page 20)

Selects the title, chapter, or track to play in the order you want.

SHUFFLE (page 21)

Plays the title, chapter, or track in random order.

REPEAT (page 21)

Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album/file repeatedly.

A-B REPEAT (page 22)

Specifies the parts you want to play repeatedly.

SHARPNESS (page 23)

Exaggerates the outline of the image to produce a sharper picture.

PARENTAL CONTROL

(page 23)

Set to prohibit playback on this player.

SETUP (page 13, 28)

QUICK:

Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal.

CUSTOM:

In addition to the Quick Setup setting, you can adjust various other settings.

RESET:

Returns the settings in "SETUP" to the default setting.

ZOOM

Magnifies the image up to four times the original size, and scroll using / // .

To return to normal view, press CLEAR.

This function is available for all pictures except a background image.

ANGLE

Changes the angle.

CUSTOM PICTURE MODE

(page 23)

Adjusts the video signal from the player. You can select the picture quality that best suits the programme you are watching.

TVS

Selects surround sound effect when connecting a stereo TV or 2 front speakers. This only works when playing a multichannel Dolby audio soundtrack. Furthermore, if the player is set up to output the signal from the DIGITAL OUT (COAXIAL) jack, the surround effect will only be heard when "DOLBY DIGITAL" is set to "D-PCM" and "MPEG" is set to "PCM" in "AUDIO SETUP" (page 31).

The default setting is underlined.

• OFF

Cancels the setting.

• TVS DYNAMIC THEATER

• TVS DYNAMIC

• TVS WIDE

This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV.

• TVS NIGHT

This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS WIDE” at low volume.

• TVS STANDARD

Use this setting when you want to use TVS with 2 separate speakers.

[NO TEXT]

• When you select one of the TVS modes, turn off the surround setting of the connected TV or audio component.
  • The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes.

The Control Menu icon indicator lights up in green

"REPEAT," "A-B REPEAT," "SHARPNESS," "ZOOM," "TVS" only). The "ORIGINAL/PLAY LIST" indicator lights up in green when you select "PLAY LIST" (default setting). The "ANGLE" indicator lights up in green when you can change the angle. The "CUSTOM PICTURE MODE" indicator lights up in green when any setting other than "STANDARD" is selected.

◆Items for DATA discs

Item Item Name, Function

ALBUM

Selects the album that contains MP3 audio tracks and JPEG image file to be played.

FILE

Selects the JPEG image file to be played.

ALBUM

Selects the album that contains DivX video file to be played.

FILE

Selects the DivX video file to be played.

DATE

Displays the date the picture was taken by a digital camera.

INTERVAL (page 26)

Specifies the duration for which the slides are displayed on the screen.

EFFECT (page 26)

Selects the effects to be used for changing slides during a slide show.

MODE (MP3, JPEG)

Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE), or both (AUTO) to be played when playing a DATA disc.

Various Play Mode Functions

You can set the following play modes:

• Programme Play (page 20)
- Shuffle Play (page 21)
- Repeat Play (page 21)
• A-B Repeat Play (page 22)

[NO TEXT]

The play mode is cancelled when:

• you open the disc tray.
• you press I/⏻ and the player enters standby mode.

Creating your own mme (Programme Play)

DVDvideo

VCD

CD

You can play the contents of a disc in the order you want. You can programme up to 99 titles, chapters, and tracks.

1 After selecting (PROGRAM) on the Control Menu (page 17), press ↑/↓ to select "SET →," then press ENTER.

"TRACK" is displayed when you play a VIDEO CD or CD.

PROGRAM ALL CLEAR 1. TITLE 2. TITLE -- 3. TITLE -- 4. TITLE -- 5. TITLE -- 6. TITLE -- 7. TITLE -- T 01 02 03 04 05

Titles or tracks recorded on a disc

2 Press →.

The cursor moves to the title or track row "T" (in this case, "01").

PROGRAM ALL CLEAR 1. TITLE -- 2. TITLE -- 3. TITLE -- 4. TITLE -- 5. TITLE -- 6. TITLE -- 7. TITLE -- T 01 02 03 04 05 C ALL 01 02 03 04 05 06

Chapters recorded on a disc

3 Select the title, chapter, or track you want to programme.

◆When playing a DVD VIDEO

For example, select chapter "03" of title "02."

Press ↑/↓ to select "02" under "T," then press ENTER.

Next, press ↑/↓ to select "03" under "C," then press ENTER.

PROGRAM ALL CLEAR 1. TITLE 0 2-0 3 2. TITLE -- 3. TITLE -- 4. TITLE -- 5. TITLE -- 6. TITLE -- 7. TITLE -- T --. 01 02 03 04 05

Selected title and chapter

◆When playing a VIDEO CD or CD

For example, select track "02."

Press ↑/↓ to select "02" under "T," then press ENTER.

Selected track PROGRAM ALL CLEAR 1. TRACK 02 2. TRACK -- 3. TRACK -- 4. TRACK -- 5. TRACK -- 6. TRACK -- 7. TRACK -- 0:15:30 T -- 01 02 03 04 05

Total time of the programmed tracks

4 Repeat steps 2 to 3, to programme other titles, chapters, or tracks.

The programmed titles, chapters, and tracks are displayed in the selected order.

5 Press ▶.

Programme Play begins.

When the programme ends, you can restart the same programme again by pressing ▶.

To return to normal play

Press CLEAR, or select "OFF" in step 1. To play the same programme again, select "ON" in step 1 and press ENTER.

To change or cancel a programme

1 Follow step 1 of “Creating your own programme (Programme Play).”
2 Select the programme number of the title, chapter, or track you want to change or cancel using ↑/↓ and press →. If you want to delete the title, chapter, or track from the programme, press CLEAR.
3 Follow step 3 of “Creating your own programme (Programme Play)” for new programming. To cancel a programme, select “--” under “T,” then press ENTER.

To cancel all of the titles, chapters, or tracks in the programmed order

Press ↑ and select “ALL CLEAR” in step 2 of “Creating your own programme (Programme Play)” and press ENTER.

You can perform Repeat Play or Shuffle Play of programmed titles, chapters, or tracks. During Programme Play, follow the steps of Repeat Play (page 21) or Shuffle Play (page 21).

©

• When you programme tracks on a Super VCD, the total playing time is not displayed.
• You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

Playing in random order

(Shuffle Play) DVDvideo VCD CD

You can have the player “shuffle” titles, chapters, or tracks. Subsequent “shuffling” may produce a different playing order.

1 After selecting (SHUFFLE) on the Control Menu (page 17), press ↑/↓ to select the item to be shuffled.

◆When playing a DVD VIDEO
• TITLE
- CHAPTER
◆When playing a VIDEO CD or CD
- TRACK
◆When Programme Play is activated
- ON: shuffles titles, chapters, or tracks selected in Programme Play.

2 Press ENTER.

Shuffle Play starts.

To return to normal play

Press CLEAR, or select "OFF" in step 1.

• You can set Shuffle Play while the player is stopped. After selecting the “SHUFFLE” option, press ▶. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in random order when “CHAPTER” is selected.

[NO TEXT]

You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

Playing repeatedly (Repeat Play) DVDVideo DVDVR VCD CD

DATA

You can play all of the titles or tracks on a disc, or a single title, chapter, or track repeatedly.

You can use a combination of Shuffle or Programme Play modes.

1 After selecting (REPEAT) on the Control Menu (page 17), press ↑/↓ to select the item to be repeated.

- DISC: repeats all of the titles, tracks, or albums. (Select ORIGINAL or PLAY LIST in DVD-VR mode.)

• TITLE: repeats the current title on a disc.
  • CHAPTER: repeats the current chapter.
• TRACK: repeats the current track.
• FILE (DivX video files only): repeats the current file.
  • ALBUM: repeats the current album.

◆When Programme Play or Shuffle Play is activated

- ON: repeats Programme Play or Shuffle Play.

2 Press ENTER.

Repeat Play starts.

To return to normal play

Press CLEAR, or select "OFF" in step 1.

[NO TEXT]

You cannot use this function with VIDEO CDs or Super VCDs with PBC playback.

Repeating a specific portion (A-B Repeat Play)

You can play a specific portion of a title, chapter or track repeatedly.

1 After selecting (A-B REPEAT) on the Control Menu (page 17), press ↑/↓ to select “SET →,” then press ENTER.

The “A-B REPEAT” setting bar appears.

A 18 - 1:32:30 B

2 During playback, when you find the starting point (point A) of the portion to be played repeatedly, press ENTER.

The starting point (point A) is set.

A 18 - 1:32:55 B 18 - 1:33:05

3 When you reach the ending point (point B), press ENTER again.

The set points are displayed and the player starts repeating this specific portion.

To return to normal play

Press CLEAR, or select "OFF" in step 1.

[NO TEXT]

• A-B Repeat Play does not work across multiple titles.
• You may not set A-B Repeat Play for contents in DVD-VR mode that contains still pictures.

Customizing the Playback Configuration

Adjusting the playback picture (CUSTOM PICTURE MODE)

DVDvideo

DVDVR

VCD

DATA

You can adjust the video signal from the player to obtain the picture quality you want.

1 After selecting (CUSTOM PICTURE MODE) on the Control Menu (page 17), press ↑/↓ to select the setting you want.

The default setting is underlined.

• STANDARD: displays a standard picture.
• DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the colour intensity.
• DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and colour intensity.
• CINEMA 1: enhances details in dark areas by increasing the black level.
• CINEMA 2: white colours become brighter and black colours become richer, and the colour contrast is increased.
- MEMORY: adjusts the picture in greater detail.

PICTURE Changes the contrast.
BRIGHTNESS	Changes the overall brightness.
COLOR Makes	the colours deeper or lighter.
HUE Changes the colour balance.

2 Press ENTER.

The selected setting takes effect.

When you watch a movie, "CINEMA 1" or "CINEMA 2" is recommended.

Sharpening the picture (SHARPNESS) DVDVideo DVDVR VCD DATA

You can enhance the outlines of images to produce a sharper picture.

1 After selecting (SHARPNESS) on the Control Menu (page 17), press ↑/↓ to select a level.

The default setting is underlined.

• OFF: cancels this option.
• 1: enhances the outline.
• 2: enhances the outline more than 1.

2 Press ENTER.

The selected setting takes effect.

Locking discs (PARENTAL CONTROL) DVDvideo

Playback of some DVD VIDEOS can be limited according to a predetermined level such as the age of the users. The "PARENTAL CONTROL" function allows you to set a playback limitation level.

1 After selecting (PARENTAL CONTROL) on the Control Menu (page 17), press ↑/↓ to select "PLAYER →," then press ENTER.

The password is required.

2 Enter or re-enter your 4-digit password using the number buttons, then press ENTER.

The display for setting the playback limitation level appears.

3 Press ↑/↓ to select "STANDARD," then press ENTER.

The selection items for "STANDARD" are displayed.

4 Press ↑/↓ to select a geographic area as the playback limitation level, then press ENTER.

The area is selected.

When you select "OTHERS →," select and enter a standard code in the table on page 38 using the number buttons.

5 Press ↑/↓ to select "LEVEL," then press ENTER.

The selection items for "LEVEL" are displayed.

Select the level you want using ↑/↓, then press ENTER.

Parental Control setting is complete. The lower the value, the stricter the limitation.

To turn off the Parental Control function

Set "LEVEL" to "OFF" in step 6.

To set or change your password

After selecting “PARENTAL CONTROL” on the Control Menu, select “PASSWORD →,” then press ENTER.

If you forget your password, remove the disc and repeat step 1 of “Locking discs (PARENTAL CONTROL).” When you are asked to enter your password, enter “199703” using the number buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the player and press ▶. When the display for entering your password appears, enter your new password.

Depending on the disc, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is cancelled, the level returns to the previous level.

Playing MP3 Audio and JPEG Images DATA

You can play MP3 audio tracks and JPEG image files on DATA discs.

You can enjoy JPEG images as a slide show.

PICTURE NAVI PITURE NAVI TV TV TIME/TEXT AUX: SUBTITLE Clear TOP MENU MENU TIME/TEXT SUBTITLE MENU ENTER DISPLAY RETURN RETURN RETURN RETURN RETURN

You can view the disc information while playing MP3 audio tracks and JPEG image files using TIME/TEXT (page 6).

DATA CDs recorded in KODAK Picture CD format automatically start playing when inserted.

1 Press MENU.

The list of albums on the disc appears. When an album is being played, its title is shaded.

1 (15) Album 1 Album 2 Album 3 Album 4 Album 5 Album 6 Album 7 Album 8

2 Press ↑/↓ to select the album.

3 Press ▶.

Playback starts from the selected album. The JPEG images in the selected album start playing as a slide show.

To select a specific MP3 audio track, press ENTER and press ↑/↓ to select a track, then press ENTER.

To select a specific JPEG image file, see "Selecting a JPEG image file" (page 25).

To stop playback

Press ■.

To go to the next or previous page

Press or .

To return to the previous display

Press 📌 RETURN.

To go to the next or previous MP3 audio track

Press ▶▶▶ or ◀◀◀ during playback. You can select the first track of the next album by pressing ▶▶▶ during playback of the last track of the current album.

Note that you cannot return to the previous album by using ◀◀◀, and that you need to select the previous album from the album list.

To turn on or off the display

Press MENU repeatedly.

Of the selected album, you can select to play only the MP3 audio tracks, JPEG image files, or both, by setting “MODE (MP3, JPEG)” (page 19).

Selecting a JPEG image file

1 Press MENU.

The list of albums on the disc appears.

2 Press ↑/↓ to select the album, then press PICTURE NAVI.

The image files in the album appear in 16 subscreens. A scroll box is displayed on the right.

1	2	3	4	1
5	6	7	8
9	1	0	1
13 14 15 16

To display additional images, select a bottom image and press ↓. To return to a previous image, select a top image and press ↑.

3 Press ←/↑/↓/→ to select the image you want to view, and press ENTER.

The selected image appears.

To go to the next or previous JPEG image file

Press ← or → during playback. You can select the first file of the next album by pressing → during playback of the last file of the current album.

Note that you cannot return to the previous album by using , and that you need to select the previous album from the album list.

To rotate a JPEG image

Press ↑/↓ while viewing the image. Each time you press ↑, the image rotates counterclockwise by 90 degrees.

To return to normal view, press CLEAR.

Note that the view also returns to normal if you press / to go to the next or previous image.

To display JPEG image information

Press SUBTITLE while viewing JPEG image files.

The file name, camera maker/model, date, time, picture resolution, file size, camera setting information (ISO speed rating, Exposure time, F Number, Exposure bias, or Focal length) of the picture are displayed on the screen.

5 is displayed when the picture was taken using flash.

☐ is displayed when the image is automatically rotated.

To hide the information, press SUBTITLE. Note that the above information may not appear depending on the digital camera.

To stop viewing the JPEG image

Press ■.

[NO TEXT]

PICTURE NAVI does not work if "AUDIO (MP3)" is selected in "MODE (MP3, JPEG)" (page 19).

Setting the pace for a how (INTERVAL)

You can set the time the slides are displayed on the screen.

1 After selecting (INTERVAL) on the Control Menu (page 17), press ↑/↓ to select a setting.

The default setting is underlined.

• NORMAL: sets to standard duration.
- FAST: sets a duration shorter than NORMAL.
- SLOW 1: sets a duration longer than NORMAL.
- SLOW 2: sets a duration longer than SLOW 1.

2 Press ENTER.

Selecting the slides' appearance (EFFECT)

You can select the way the slides are displayed during a slide show.

1 After selecting (EFFECT) on the Control Menu (page 17), press ↑/↓ to select a setting.

The default setting is underlined.

• MODE 1: the images randomly cycle through the effects.
• MODE 2: the next image slides over the previous image.
• MODE 3: the image sweeps in from top to bottom.
• MODE 4: the image sweeps in from left to right.
• MODE 5: the image stretches out from the centre of the screen.
  • OFF: turns off this function.

2 Press ENTER.

Playing DivX Video Files

DATA

DivX ^® is a video file compression technology, developed by DivX, Inc. This product is an official DivX ^® Certified product.

You can play DATA discs that contain DivX video files.

TIME/ TEXT AUDIO SUBTITLE MENU MENU ENTER RETURN ←/↑/↓/→ RETURN +/-

You can view the disc information while playing a DivX video file using TIME/TEXT (page 6).

[NO TEXT]

• If there are no DivX video files recorded on the DATA disc, a message appears to indicate that the disc is not playable.
• The player cannot play a DivX video file of size more than 720 (width) × 576 (height)/2 GB.
• The player cannot play some DivX video files that are longer than 3 hours.
• Depending on the DivX video file, the picture may pause or be unclear. In which case, it is recommended that you create the file at a lower bit rate. If the sound is still noisy, MP3 is the recommended audio format. Note, however, this player does not conform to WMA (Windows Media Audio) format.
• Because of the compression technology used for DivX video files, it may take some time after you press ▶ for the picture to appear.
• Depending on the DivX video file, the sound may not match the pictures on the screen.

1 Press MENU.

A list of albums on the disc appears. Only albums that contain DivX video files are listed.

To play the entire album, select an album and press ▶.

2 Press ↑/↓ to select the album and press ENTER.

3 Press ▶.

Playback starts from the selected album. To select a specific file, press ↑/↓, and press ENTER. The selected file starts playing.

To stop playback

Press ■.

To go to the next or previous page

Press ← or →.

To turn the display on or off

Press MENU repeatedly.

To return to the previous display

Press o RETURN.

To go to the next or previous DivX video file without turning on the above file list

You can select the next or previous DivX video file in the same album by pressing ▶▶▶▶ or ◀◀◀.

You can also select the first file of the next album by pressing ▶▶ during playback of the last file of the current album. Note that you cannot return to the previous album by using ◀◀. To return to the previous album, select it from the album list.

If the number of viewing times is preset, you can play the DivX video files as many times as the preset number. The following occurrences are counted:

- when the disc tray is opened.

- when another file is played.

- when the player is turned off. This includes when the player is automatically turned off by the Auto Power Off function. Press instead of when you want to stop viewing.

Settings and Adjustments

Using the Setup Display

By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things.

For details on each Setup Display item, see pages from 28 to 32.

[NO TEXT]

Playback settings stored in the disc take priority over the Setup Display settings and not all of the functions described may work.

1 Press DISPLAY when the player is in stop mode.

The Control Menu appears.

2 Press ↑/↓ to select

(SETUP), then press ENTER.

The options for "SETUP" appear.

• QUICK: makes the basic adjustments (page 13).
• CUSTOM: makes various adjustments.
• RESET: resets all the settings explained on pages 28 to 32.

3 Press ↑/↓ to select "CUSTOM," then press ENTER.

The Setup Display appears.

Select the setup category and adjust each item following the instruction on pages 28 to 32.

LANGUAGE SETUP OSD: ENGLISH MENU: ENGLISH AUDIO: ORIGINAL SUBTITLE: ENGLISH

LANGUAGE SETUP

“LANGUAGE SETUP” allows you to set various languages for the on-screen display or sound track.

Select "LANGUAGE SETUP" in the Setup Display.

◆OSD (On-Screen Display)

Switches the display language on the screen.

◆MENU (DVD VIDEO only)

You can select the desired language for the disc's menu.

◆AUDIO (DVD VIDEO only)

Switches the language of the sound track. When you select “ORIGINAL,” the language given priority in the disc is selected.

◆SUBTITLE (DVD VIDEO only)

Switches the language of the subtitle recorded on the DVD VIDEO.

When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track.

If you select “OTHERS →” in “MENU,” “SUBTITLE,” or “AUDIO,” select and enter a language code from “Language Code List” on page 38 using the number buttons.

[NO TEXT]

If you select a language in “MENU,” “SUBTITLE,” or “AUDIO” that is not recorded on a DVD VIDEO, one of the recorded languages will be automatically selected.

SCREEN SETUP

Choose settings according to the TV to be connected.

Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 28). The default settings are underlined.

TV TYPE

Selects the aspect ratio of the connected TV (4:3 standard or wide).

16:9 Select this	is when you connect a wide-screen TV or a TV with a wide mode function.
4:3 LETTER BOX	Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen.
4:3 PAN SCAN	Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

16:9

Simple line drawing of a mountain landscape with trees and a river (no text or symbols)

4:3 LETTER BOX

4:3 PAN SCAN

Simple line drawing of a mountain landscape with trees and water (no text or symbols)

[NO TEXT]

Depending on the DVD, "4:3 LETTER BOX" may be selected automatically instead of "4:3 PAN SCAN" or vice versa.

◆SCREEN SAVER

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play a CD, or DATA disc (MP3 audio) for more than 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press ▶ to turn off the screen saver.

ON Turns on the screen saver.

OFF Turns off the screen saver.

◆BACKGROUND

Selects the background colour or picture on the TV screen when the player is in stop mode or while playing a CD, or DATA disc (MP3 audio).

JACKETPICTURE	The jacket picture (still picture) appears, but only when the jacket picture is already recorded on the disc (CD-EXTRA, etc.). If the disc does not contain a jacket picture, the “GRAPHICS” picture appears.
GRAPHICS	A preset picture stored in the player appears.
BLUE The background colour is blue.
BLACK The background colour is black.

◆LINE

Selects video signals output from the LINE (RGB)-TV jack on the rear panel of the player.

VIDEO	Outputs video signals.
RGB Outputs	RGB signals.

[NO TEXT]

If your TV does not accept RGB signals, no picture will appear on the TV screen, even if you select "RGB." Refer to the instructions supplied with your TV.

CUSTOM SETUP

Use this to set up playback related and other settings.

Select “CUSTOM SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 28). The default settings are underlined.

◆AUTO POWER OFF

Switches the Auto Power Off setting on or off.

ON The player	enters standby mode when left in stop mode for more than 30 minutes.
OFF Switches	this function off.

◆AUTO PLAY

Switches the Auto Play setting on or off. This function is useful when the player is connected to a timer (not supplied).

OFF	Switches this function off.
ON Automatically starts playback when the player is turned on by a timer (not supplied).

◆PAUSE MODE (DVDs only)

Selects the picture in pause mode.

AUTO	The picture, including subjects that move dynamically, is output with no jitter. Normally select this position.
FRAME The	picture, including subjects that do not move dynamically, is output in high resolution.

◆TRACK SELECTION (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded.

OFF	No priority given.
AUTO Priority given.

[NO TEXT]

• When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 28).
• If you set “DTS” to “OFF” (page 32), the DTS sound track is not played even if you set “TRACK SELECTION” to “AUTO.”
• If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, MPEG audio, and Dolby Digital sound tracks in this order.

◆DivX

Displays the registration code for this player. For more information, go to http://www.divx.com/vod on the Internet.

AUDIO SETUP

"AUDIO SETUP" allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 28).

The default settings are underlined.

◆AUDIO DRC (Dynamic Range Control) (DVDs only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.”

This function affects the output from the following jacks:

• LINE (RGB)-TV jack
• DIGITAL OUT (COAXIAL) jack only when “DOLBY DIGITAL” is set to “D-PCM” (page 31).

STANDARD	Normally, select this position.
TV MODE Makes low sounds clear even if you turn the volume down.
WIDE RANGE	Gives you the feeling of being at a live performance.

◆DOWNMIX (DVDs only)

Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see page 7. This function affects the output of the following jacks:

• LINE (RGB)-TV jack
• DIGITAL OUT (COAXIAL) jack when "DOLBY DIGITAL" is set to "D-PCM" (page 31).

DOLBY SUR-ROUND	Normally, select this position.Multi-channel audio signals are output to 2 channels for enjoying surround sounds.
NORMAL	Multi-channel audio signals are downmixed to 2 channels for use with your stereo.

◆DIGITAL OUT

Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack.

ON Normally	select this position.When you select “ON,” see“Setting the digital output signal”for further settings.
OFF The influence of the digitalcircuit upon the analogue circuitis minimal.

Setting the digital output signal

Switches the method of outputting audio signals when you connect a component such as an audio component or MD deck with a digital input jack.

For connection details, see page 10. Select “DOLBY DIGITAL,” “MPEG,” “DTS,” and “48kHz/96kHz PCM” after setting “DIGITAL OUT” to “ON.” If you connect a component that is incompatible with the selected audio signal, a loud noise (or no sound) may be heard from the speakers, risking damage to your ears or speakers.

◆DOLBY DIGITAL (DVDs only)

Selects the type of Dolby Digital signal.

DOLBY DIGITAL	Select this when the player is connected to an audio component with a built-in Dolby Digital decoder.
D-PCM Select	this when the player is connected to an audio component without a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the “DOWNMIX” item in “AUDIO SETUP” (page 31).

◆MPEG (DVDs only)

Selects the type of MPEG audio signal.

PCM Select this when the player is connected to an audio component without a built-in MPEG decoder. If you play multi-channel MPEG audio sound tracks, only the Front (L) and Front (R) signals will be output from your two front speakers.

MPEG Select this when the player is connected to an audio component with a built-in MPEG decoder.

◆DTS

Selects whether or not to output DTS signals.

OFF	Select this when the player is connected to an audio component without a built-in DTS decoder.
ON Select this	when the player is connected to an audio component with a built-in DTS decoder.

• When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 32).
• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 32). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.

◆48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit	The audio signals of DVD VIDEOS are always converted to 48kHz/16bit.
96kHz/24bit	All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

[NO TEXT]

The analogue audio signals from the LINE (RGB)-TV jack are not affected by this setting and keep their original sampling frequency level.

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Power

The power is not turned on.

→ Check that the mains lead is connected securely.

Picture

There is no picture/picture noise appears.

→ Re-connect the connecting cable securely.
→ The connecting cables are damaged.
→ Check the connection to your TV (page 9) and switch the input selector on your TV so that the signal from the player appears on the TV screen.
→ Set “LINE” in “SCREEN SETUP” to an item appropriate for your system (page 29).
→ The disc is dirty or flawed.
→ The disc is recorded in a colour system that is different from your TV.

The picture is black and white.

→ Set “LINE” in “SCREEN SETUP” to an item appropriate for your TV (page 29).
→ Depending on the TV, the picture on the screen becomes black and white when you play a disc recorded in the NTSC colour system.
→ When you are using a SCART cable, be sure to use one that is fully wired (21-pins).

Sound

There is no sound.

→ Re-connect the connecting cable securely.
→ The connecting cable is damaged.
→ The player is connected to the wrong input jack on the audio component (page 9, 10).
→ The audio component input is not correctly set.

→ The player is in pause mode or in Slow-motion Play mode.
→ The player is in fast forward or fast reverse mode.
→ If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the audio settings (page 31).
→ While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.” Press AUDIO to select the recorded track.
→ When playing multichannel MPEG audio sound tracks, only the Front (L) and Front (R) signals will be output from two front speakers.

The sound volume is low.

The sound volume is low on some DVDs. The sound volume may improve if you set "AUDIO DRC" in "AUDIO SETUP" to "TV MODE" (page 31).

Operation

The remote does not function.

→ The batteries in the remote are weak.
→ There are obstacles between the remote and the player.
→ The distance between the remote and the player is too far.
→ The remote is not pointed at the remote sensor on the player.

The disc does not play.

→ The disc is turned over. Insert the disc with the playback side facing down.
→ The disc is skewed.
→ The player cannot play certain discs (page 35).
→ The region code on the DVD does not match the player.
→ Moisture has condensed inside the player (page 3).
→ The player cannot play a recorded disc that is not correctly finalized (page 36).

The MP3 audio track cannot be played (page 35).

→ The player cannot play audio tracks in mp3PRO format.
→ “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)” (page 19).
→ The DATA disc contains a DivX video file.

The JPEG image file cannot be played (page 35).

The image is larger than 3072 (width) × 2048 (height) in normal mode, or more than 3,300,000 pixels in progressive JPEG. (Some progressive JPEG files cannot be displayed even if the file size is within this specified capacity.)
→ “MODE (MP3, JPEG)” is set to “AUDIO (MP3)” (page 19).
→ The DATA disc contains a DivX video file.

The MP3 audio tracks and JPEG image files start playing simultaneously.

→ “MODE (MP3, JPEG)” is set to “AUTO” (page 19).

The DivX video file cannot be played.

→ The file is not created in DivX format.
→ The file has an extension other than “.AVI” or “.DIVX.”
→ The DATA disc (DivX video) is not created in a DivX format that conforms to ISO 9660 Level 1/Level 2 or Joliet/UDF.
→ The DivX video file is larger than 720 (width) × 576 (height).

The album/track/file names are not displayed correctly.

→ The player can only display numbers and alphabet. Other characters are displayed as “*.”

The disc does not start playing from the beginning.

→ Programme Play, Shuffle Play, Repeat Play, or A-B Repeat Play is selected (page 20).
→ Resume play has taken effect (page 15).

"Copyright lock" appears and the screen turns blue when playing in DVD-VR mode.

→ Images taken from digital broadcasts, etc., may contain copy protection signals, such as complete copy protection signals, single copy signals, and restriction-free signals. When images that contain copy protection signals are played, a blue screen may appear instead of the images. It may take a while when looking for playable images. (For player that cannot play images that contain a copy protection only)

Some functions such as Stop, Fast Play, Slow Play, Slow-motion Play, Repeat Play, Shuffle Play, or Programme Play cannot be performed.

→ Depending on the disc, you may not be able to do some of the operations above.

The player does not operate properly.

→ When static electricity, etc., causes the player to operate abnormally, unplug the player.

5 numbers or letters are displayed on the screen.

→ The self-diagnosis function was activated. (See the table on page 35.)

The disc tray does not open and "L"cR (LOCKED) appears on the front panel display.

→ Child Lock is set (page 16).

The disc tray does not open and "E" (TRAY LOCKED) appears on the front panel display.

→ Contact your Sony dealer or local authorized Sony service facility.

"Data error" appears on the TV screen when playing a DATA disc.

→ The MP3 audio track/JPEG image file/DivX video file you want to play is broken.
→ The data is not MPEG-1 Audio Layer III data.
→ The JPEG image file format does not conform to DCF (page 35).
→ The JPEG image file has the extension “.JPG” or “.JPEG,” but is not in JPEG format.
The file you want to play has the extension “.AVI” or “.DIVX,” but is not in DivX format, or is in DivX format but does not conform to a DivX Certified profile.

Self-diagnosis Function (When letters/numbers appear on the screen)

When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 50) with a combination of a letter and four digits appears on the screen. In this case, check the following table.

First three characters of the service number	Cause and/or corrective action
C 13 The disc is dirty or recorded in a format that this player cannot play (page 35).→Clean the disc with a cleaning cloth or check its format.
C 31 The disc is not inserted correctly.→Re-insert the disc correctly.

playable Discs

Format of discs
Commercial DVD
DVD-RW/-R
	RW	RR4.7
DVD+RW/+R/+R DL
	DVD+ReWritable	DVD+R
		DVD+R DL
VIDEO CD/Music CD
CD-RW/-R

The player can play recordable media that is correctly finalized.

“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R DL,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks.

The player cannot play the discs other than above. Also, the player cannot play the following discs:

• A disc that has a non-standard shape (e.g., card, heart).
  • A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape or a sticker still left on it.

Note about CDs/DVDs

The player can play CD-ROMs/CD-Rs/CD-RWs recorded in the following formats:

– music CD format
– video CD format
- MP3 (MPEG-1 Audio Layer III) audio tracks, JPEG image files, and DivX video files of format conforming to ISO 9660* Level 1/Level 2, or its extended format, Joliet

- KODAK Picture CD format

* A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for Standardization).

The player can play DVD-ROMs/

DVD+RWs/DVD+Rs/DVD+R DLs/

DVD-RWs/DVD-Rs/DVD-R DLs recorded in the following formats:

- MP3 audio tracks, JPEG image files, and DivX video files of format conforming to UDF (Universal Disk Format).

MP3 audio track, JPEG image file or DivX video file that the player can play

The player can play the following tracks and files:

• MP3 audio tracks with the extension ".MP3."
• JPEG image files with the extension ".JPEG" or ".JPG."
• JPEG image files that conform to the DCF* image file format.
• DivX video files with the extension “.AVI” or “.DIVX.”

* "Design rule for Camera File system": Image standards for digital cameras regulated by JEITA (Japan Electronics and Information Technology Industries Association).

• If you add numbers (01, 02, 03, etc.) to the front of the track/file names when you store the tracks (or files) in a disc, the tracks and files will be played in that order.
• Since a disc with a complex hierarchy of folders takes longer to start playback, it is recommended that you create albums with no more than two hierarchies.
• To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the same MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat Play)” (page 21) to repeat the track or album.

• The player will play any data with the extension “.MP3,” “.JPG,” or “.JPEG,” even if they are not in MP3 or JPEG format. Playing these data may generate a loud noise which could damage your speaker system.
• The player does not conform to audio tracks in mp3PRO format.
• Some JPEG files cannot be played.
• With DATA discs that contain DivX video files in addition to MP3 audio tracks or JPEG image files, the player plays only the DivX video files.
• You can view a slide show with sound only when the MP3 audio tracks and JPEG image files are placed in the same album.
• If playing time of JPEG image or MP3 audio is longer than the other, the longer one continues without sound or image.
• If you play large MP3 track data and JPEG image data at the same time, the sound may skip. It is recommended that you set the MP3 bit rate to 128 kbps or lower when creating the file. If the sound still skips, then reduce the size of the JPEG file.
• Some JPEG files, especially progressive JPEG files or JPEG files of 3,000,000 pixels or more, may take longer to display than others, which may make the duration seem longer than the setting you selected.
• The player recognizes a maximum of 200 albums regardless of the selected mode. Of each album, the player recognizes up to 300 MP3 audio tracks and 300 JPEG image files when “AUTO” is selected, 600 MP3 audio tracks when “AUDIO (MP3)” is selected, 600 JPEG image files when “IMAGE (JPEG)” is selected, and 600 DivX video files.
• Proceeding to the next or another album may take some time.

• The player may not play a DivX video file when the file has been combined from two or more DivX video files.

• The player cannot play a DivX video file of size more than 720 (width) × 576 (height)/2 GB.

• Depending on the DivX video file, the picture may be unclear or the sound may skip.
• The player cannot play some DivX video files that are longer than 3 hours.

Region code

Your player has a region code printed on the back of the unit and only will play commercial DVDs (playback only) labelled with identical region codes. This system is used to protect copyrights.

Commercial DVDs labelled 📄 all also play on this player.

Depending on the commercial DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions.

BONT+ BVP 8002 Region code DIV 0Hz 51 00N 000 MHz

• Notes about recordable media

Some recordable media cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions for the recording device. Note that some playback functions may not work with some DVD+RWs/DVD+Rs/DVD+R DLs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA discs created in Packet Write format cannot be played.

• Music discs encoded with copyright protection technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard. Various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

- For player that cannot play images that contain a copy protection only

Images in DVD-VR mode with CPRM* protection may not be played if they contain a copy protection signal. "Copyright lock" appears on the screen.

* CPRM (Content Protection for Recordable Media) is a coding technology that protects the copyright of images.

• Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

Note on playback operations of DVDs and VIDEO CDs

Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

About MPEG-4 VISUAL

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

Specifications

System

Laser: Semiconductor laser

Outputs

(Jack name: Jack type/Output level/Load impedance)

DIGITAL OUT (COAXIAL):

Phono jack/0.5 Vp-p/75 ohms

LINE (RGB)-TV:

(AUDIO): SCART jack/2 Vrms/10 kilohms
(VIDEO): SCART jack/1.0 Vp-p/75 ohms
(RGB): SCART jack/0.7 Vp-p/75 ohms

General

Power requirements:

220 - 240 V AC, 50/60 Hz

Power consumption: 10 W

Dimensions (approx.):

320 × 38 × 209 mm (width/height/depth) incl. projecting parts

Mass (approx.): 1.2 kg

Operating temperature: 5 °C to 35 °C

Operating humidity: 25 % to 80 %

Supplied accessories

- Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Specifications and design are subject to change without notice.

Language Code List

For details, see pages 6, 28.

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language Code Language Code Language Code Language
1027 Afar	1183 Irish	1347 Maori	1507 Samoan
1028 Abkhazian	1186 Scots Gaelic	1349 Macedonian	1508 Shona
1032 Afrikaans	1194 Galician	1350 Malayalam	1509 Somali
1039 Amharic	1196 Guarani	1352 Mongolian	1511 Albanian
1044 Arabic	1203 Gujarati	1353 Moldavian	1512 Serbian
1045 Assamese	1209 Hausa	1356 Marathi	1513 Siswati
1051 Aymara	1217 Hindi	1357 Malay	1514 Sesotho
1052 Azerbaijani	1226 Croatian	1358 Maltese	1515 Sundanese
1053 Bashkir	1229 Hungarian	1363 Burmese	1516 Swedish
1057 Byelorussian	1233 Armenian	1365 Nauru	1517 Swahili
1059 Bulgarian	1235 Interlingua	1369 Nepali	1521 Tamil
1060 Bihari	1239 Interlingue	1376 Dutch	1525 Telugu
1061 Bislama	1245 Inupiak	1379 Norwegian	1527 Tajik
1066 Bengali; Bangla	1248 Indonesian	1393 Occitan	1528 Thai
	1253 Icelandic	1403 (Afan)Oromo	1529 Tigrinya
1067 Tibetan	1254 Italian	1408 Oriya	1531 Turkmen
1070 Breton	1257 Hebrew	1417 Punjabi	1532 Tagalog
1079 Catalan	1261 Japanese	1428 Polish	1534 Setswana
1093 Corsican	1269 Yiddish	1435 Pashto;	1535 Tonga
1097 Czech	1283 Javanese	Pushto	1538 Turkish
1103 Welsh	1287 Georgian	1436 Portuguese	1539 Tsonga
1105 Danish	1297 Kazakh	1463 Quechua	1540 Tatar
1109 German	1298 Greenlandic	1481 Rhaeto-	1543 Twi
1130 Bhutani	1299 Cambodian	Romance	1557 Ukrainian
1142 Greek	1300 Kannada	1482 Kirundi	1564 Urdu
1144 English	1301 Korean	1483 Romanian	1572 Uzbek
1145 Esperanto	1305 Kashmiri	1489 Russian	1581 Vietnamese
1149 Spanish	1307 Kurdish	1491 Kinyarwanda	1587 Volapük
1150 Estonian	1311 Kirghiz	1495 Sanskrit	1613 Wolof
1151 Basque	1313 Latin	1498 Sindhi	1632 Xhosa
1157 Persian	1326 Lingala	1501 Sangho	1665 Yoruba
1165 Finnish	1327 Laothian	1502 Serbo-	1684 Chinese
1166 Fiji	1332 Lithuanian	Croatian	1697 Zulu
1171 Faroese	1334 Latvian;	1503 Singhalese
1174 French	Lettish	1505 Slovak
1181 Frisian	1345 Malagasy	1506 Slovenian	1703 Not specified

Parental Control Area Code List

For details, see page 23.

Code	Area Code	Area Code	Area Code	Area
2044	Argentina	2165	Finland	2362 Mexico
2047	Australia	2174	France	2376 Netherlands
2046	Austria	2109	Germany	2390 New Zealand
2057	Belgium	2248	India	2379 Norway
2070	Brazil	2238	Indonesia	2427 Pakistan
2079	Canada	2254	Italy	2424 Philippines
2090	Chile	2276	Japan	2436 Portugal
2092	China	2304	Korea	2489 Russia
2115	Denmark	2363	Malaysia	2501 Singapore

Index

Numerics

16:9 29

4:3 LETTER BOX29

4:3 PAN SCAN 29

48kHz/96kHz PCM32

5.1 Channel Surround 10

A

A-B REPEAT 18, 22

A-B Repeat Play 22

Advance 7

ALBUM 19

ANGLE 18

AUDIO 28

AUDIO DRC 31

AUDIO SETUP 31

AUTO PLAY 30

AUTO POWER OFF 30

B

BACKGROUND 29

Batteries 11

C

CD 15, 35

CHAPTER 18

CHAPTER VIEWER6

Child Lock 16

Connecting 9

Continuous play CD/VIDEO CD 15 DVD 15

Control Menu 17

Control Menu Display 17

CUSTOM 28

CUSTOM PICTURE MODE 18, 23

CUSTOM SETUP 30

D

DATA disc 5

DATE 19

DIGITAL OUT 31

Digital output 31

Display 17

DivX® 27

DOLBY DIGITAL 31

DOWNMIX 31

DTS 32

DVD 5.15

DVD+RW 5,7

DVD-RW 5

E

EFFECT 19, 26

F

FAST/SLOW PLAY 7

FILE 19

H

Handling discs 3

I

ID3 tag 6

INDEX 18

INTERVAL 19, 26

J

JPEG 5

L

LANGUAGE SETUP 28

LINE 29

M

MEMORY 23

MENU 28

MODE (MP3, JPEG) 19

MP3 5

MPEG 32

N

NTSC 9

0

On-screen display 28

ORIGINAL 18

ORIGINAL/PLAY LIST 18

OSD 28

P

PAL 9

PARENTAL CONTROL18, 23

PAUSE MODE 30

PBC Playback 16

PICTURE NAVI 6

PLAY LIST 18

Playable Discs 35

PROGRAM18, 20

Programme Play 20

Q

QUICK 18

Quick Setup 13

R

Remote 6, 11

REPEAT 18, 21

Repeat Play 21

Replay 7

RESET 18

Resume 15

S

Scan backward 7

Scan forward 7

SCENE 18

SCREEN SAVER 29

SCREEN SETUP 29

SETUP 18, 28

Setup Display 28

SHARPNESS 18, 23

SHUFFLE 18, 21

Shuffle Play 21

Slow-motion Play7

SUBTITLE 26, 28

T

TIME/TEXT 18

TITLE 18

TITLE VIEWER 6

TRACK 18

TRACK SELECTION 30

TRACK VIEWER 6

Troubleshooting 33

TV TYPE 29

TVS 19

V

VIDEO CD 5, 15

Z

ZOOM 18

To find out useful hints, tips and information about Sony products and services please visit: www.sony-europe.com/myproduct/

* 1 - 4 1 1 5 6 6 9 1 4 5 * 4-115-669-14(1)