5507 - Storage furniture Safco - Free user manual and instructions

USER MANUAL 5507 Safco

3D diagram of a multi-tiered shelf or cabinet with metal legs and a top shelf, labeled 'Tools required for assembly:' (no other text or symbols)

Tools required for assembly: Phillips screwdriver and rubber mallet

Hardware Included:
Pack# 900000385

Cam Post 920000504 QTY:12 Wood Screw X5108 QTY:4 Leveler Q444 QTY:4 Dowel 920000472 QTY:6

Barrel Nut 920000579 QTY:8 Pan Head Screw 905000508 QTY:8 Cam 920000310 QTY:12 Pan Head Screw 905000506 QTY:4

Other Hardware L-Bracket 420000198 QTY:4 Laminate Stickers FCAP5 QTY:16

For questions or concerns, please call 1-888-971-6225 available Monday-Friday 7:30 AM to 5:00 PM CST (English-speaking operators)
Product Warranty is available at: safcoproducts.com

99000359, Page 1 of 3, Rev B, Rev Date 01-MAR-2021

Top Panel Box Top Panel Box Back Panel Box Side Panel Box Side Panel Box Bottom Panel

Box Bottom Panel

Insert 4 cams (with arrow out) into the bottom of the box bottom panel. Using a Philips screwdriver, screw 2 cam posts into the outside holes on the back edge of the panel until tight to the panel. Insert 1 dowel in each of the short edges of the panel and tap with a rubber mallet until they cannot be inserted any further.

Top Box Panel 2

Insert 4 cams (with arrow out) into the box top panel. Using a Philips screwdriver, screw 2 cam posts into the outside holes on the back edge of the panel until tight to the panel. Insert 1 dowel in each of the short edges of the panel and tap with a rubber mallet until they cannot be inserted any further.

Box Side Panel Place cam sticker over barrel nut

Insert 4 barrel nuts into the box side panel (with the open threaded holes in line with the holes in the panel) and cover the head of each of the barrel nuts with a laminate sicker. Using a Philips screwdriver, screw 2 cam posts into the outside holes on the top edge of the panel and screw 2 cam posts into the outside holes on the bottom edge of the panel until tight to the panel.

Repeat all of step 3 on the second box side panel.

Box Back Panel 4

Insert 1 dowel in each of the long edges of the box back panel and tap with a rubber mallet until they cannot be inserted any further. Attach 4 cams into the panel with the arrows facing the board edge.

Diagram of two vertical rods with hanging weights, enclosed in a circle (no text or symbols)

Screw 1 leveler into each leg until tight.

3D diagram of three rectangular panels with mounting holes and mounting points, labeled with numbers 1, 2, 3, showing no text or symbols.

Place the box back panel (from step 4) on a flat surface. Attach the box top panel (from step 2) and the bottom box panel (from step 1). Use a Phillips screwdriver to turn cams clockwise to tighten.

3D rendering of a mechanical assembly with two metal plates and mounting holes (no text or symbols visible)

Attach the 2 box side panels (from step 3) to the box top panel and box bottom panels. Use a Phillips screwdriver to turn cams clockwise to tighten.

3D diagram of a rectangular box with two vertical rods and a small inset showing a panel (no text or symbols)

Use a Phillips screwdriver to attach the legs to the box side panels using the long pan head screws. Ensure the threaded holes at the top of the legs are facing in.

Top Panel 9

Use a Phillips screwdriver to attach 4 L-brackets to the top panel through the single hole with wood screws. Brackets should face the short side of the top

Simple diagram with a plus sign and a circle on a horizontal line, no text or symbols present

11

Use laminate stickers to cover cams on the inside of storage box.

Technical line drawing of a cabinet or enclosure structure with no visible text, numbers, or symbols.

10

Use a Phillips screwdriver to attach L-brackets to legs through slots using the 4 short pan head screws.

3D diagram of a two-tiered metal shelf with mounting feet and a top shelf, showing internal compartments and mounting points (no text or symbols)

12

Ensure proper leveling of the storage unit by adjusting the levelers.